Table of Contents
Advertisement
CONNECTING THE PROJECTOR
This projector has various kind of terminals to connect with peripheral equipment. Connect the projector with these
equipment before turning them on. (Refer to page 14 ~ 17 for connection.)
COMPUTER IN 1
Connect the Computer output
to this terminal.
(Refer to page 14 and 15.)
VIDEO IN 1, 2
Connect the Video and Audio
outputs from the video
equipment to these terminals.
C/Cb, and Cr terminals are
provided for component video
input, such as DVD player.
(Refer to page 16 and 17.)
u When the audio input of the
audio equipment is
monaural, connect it to the
left jack.
COMPUTER IN 2, 3
Connect the Computer outputs
to these terminals.
(Refer to page 14 and 15.)
MOUSE / KEYBOARD
To use these terminals,
connection of the Mouse/
Keyboard Cable inside
the Storage Cabinet is
required.
(Refer to page 40.)
12
TERMINALS OF THE PROJECTOR
Rear Terminal
COMPUTER IN 1
VIDEO IN 1
VIDEO/Y
C/Cb(B-Y)
R-AUDIO-L
VIDEO IN 2
VIDEO
R-AUDIO-L
Front Terminal
COMPUTER IN 2
COMPUTER IN 3
AUDIO 2
(STEREO)
VIDEO IN 3
Connect the Video and Audio output from the video
equipment to these terminal. C/Cb, and Cr terminals are
provided for component video input, such as DVD player.
(Refer to page 16 and 17.)
u When the audio input of the audio equipment is monaural,
connect it to the left jack.
CONTROL PORT 1
AUDIO 1
(STEREO)
S-VIDEO
Cr(R-Y)
(MONO)
S-VIDEO
VIDEO(BNC)
R/C JACK
(MONO)
AUDIO IN 2, 3
Connect the Audio
outputs from the
computers to these
terminals.
CONTROL PORT 2
AUDIO 3
CONTROL PORT 3
(STEREO)
AUDIO IN 1
Connect the Audio output from
the computer to this terminal.
(Refer to page 14 and 15.)
CONTROL PORT 1
When controlling the computer
with the Wireless Remote Control
of this projector, connect the
mouse port to this terminal.
(Refer to page 14 and 15.)
S-VIDEO
Connect the S-VIDEO output from
the video equipment to this
terminal.
(Refer to page 16.)
R/C JACK
When using the Wired/Wireless
Remote Control Unit as the Wired
Remote Control, Connect the
Wired Remote Control Unit to the
R/C JACK with the Remote
Control Cable (supplied).
(Refer to page 21.)
CONTROL PORT 2, 3
When controlling the computer
with the Wireless Remote Control
of this projector, connect the
mouse port to these terminals.
(Refer to page 14 and 15.)
VIDEO IN 3
S-VIDEO
VIDEO/Y
C/Cb(B-Y)
Cr(R-Y)
(MONO)
L-AUDIO-R
S-VIDEO
Connect the S-VIDEO
output from the video
equipment to this
terminal.
(Refer to page 16.)
Advertisement
Table of Contents
