Connecting Another Cd Player - Sony CDP-CX355 Operating Instructions Manual

Get t ing St art ed
Connect ing Anot her CD Player
If you have a Sony CD player in which 5, 50, 200, or
300 discs can be inserted and which is equipped with
the CONTROL A1
command mode of that player can be set to CD 3, you
can control that player as the second player with this
unit. After connecting this unit and an amplifier, follow
the procedure below.
Be sure to turn off the power of each player before
making this connection.
To an AC outlet
To audio output
To an AC outlet
6 US
Downloaded from: https://www.usersmanualguide.com/
(or CONTROL A1) jack and the
COM M AND M ODE
To ANALOG OUT
To CONTROL A1
To 2ND CD IN
CDP-CX230, etc.
To CONTROL A1
To audio input
: Signal flow
What cords w ill I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (not supplied)
1
Connect the players with an audio cord (see also
"Hookups" on page 5).
CDP-CX355
2
Connect the players with a monaural (2P) mini-
plug cord.
For details on this connection, refer to the
supplementary "CONTROL A1
instructions.
3
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set the command mode of the
second player to CD 3.
For details on how to operate the second player,
see "Controlling Another CD Player" on page 21
and "Playing Alternately" on page 23.
4
Connect the AC power cord of both players to AC
Amplifier
outlets.
Notes
• Do not connect a player other than that you intend to use as
the second player to the 2ND CD IN jacks of this player.
• When connecting a second CD player, do not connect the
To an AC outlet
DIGITAL OUT (OPTICAL) connector of this unit to the
amplifier.
CDP-CX230, etc.
CDP-CX355
LINE OUT
2ND CD ANALOG
IN OUT
L L L
R R
R
CDP-CX230, etc.
CDP-CX355
CONTROL A1
CONTROL A1II
COMMAND
MODE
CD
1 2 3
Control System"