Settings Menu - Philips 7000 Series User Manual

Settings menu

settings to provide you with an even better
experience.
Button Function
Enter settings menu
Navigate up/down in menu
/
structure.
/ Previous/next selection
Start, pause or resume play
in USB/ BT mode; con�rm
the selection of the menu.
Back to previous menu or
exit menu.
1
on the remote control to
Press
open the menu.
2
Press / to select the settings.
3
Press / to adjust the value
of each setting.
•
To return to the previous screen/ exit
the settings, press
APD (Auto Standby)
The soundbar automatically turns to
Standby mode after about 15 minutes
if there is no playback from any source
or no operation is made or switched off.
ON: Auto-Standby ON.
•
OFF: Auto-Standby OFF.
•
By default, Auto-Standby is set
to ON.
DISP (D
The LED display will turn off after idling
(no user action) for
be remembered and recalled at the next
power up.
ON
•
user action) for 3 seconds.
OFF
•
By default, the display is set to ON.
.
3 seconds, and shall
DIM
Set display brightness.
HIGH, MID, LOW
•
By default, the dimmer is set to
MID.
By default, the Bass/Treble
level is set to 0.
AURST (Audio Reset)
AURST is selected, the sound setting back
to be default.
UPG (UPGRADE)
Service only, NOT applicable for end user.
UPG is selected, insert USB disk and PLAY
TO START to start �rmware upgrade.
VER –X( Version)
Service only, NOT applicable for end user.
VER-X is selected to check �rmware
version.
Sound effects
VRT X: DTS Digital Surround with DTS
Virtual X technology to create the
immersive sound effect.
AUVOL: Auto volume leveling, maintain
sound stability by automatically adjust-
ing output volume level while amplifying
smaller sounds to appropriate ranges.
Night:
Night mode, lower the bass to
make the sound clear when listening at a
low volume.
Press on the remote control to enter
1
sound effect menu.
2 Press to select the sound effect.
/
3 Press to exit sound effect menu.
EN 15