Toshiba 43 UF3D Series Operating Instructions Manual page 16

Highlight your preferred WPS connection option and
press Select, then follow the on-screen instructions.
Advanced Network Settings
If you are confident in using network setting you
can manually setup a network by highlighting Join
Other Network and pressing Select. You will have
to manually type in all your desired network settings
using the on-screen keyboard.
If you have connected your TV via an Ethernet cable
you can also configure your network setting. This
is also a more advanced setting for users that are
confident in setting up networks.
Saving your WLAN Password to your Amazon
Account
Your WLAN password can be saved to your Amazon
Account, this can be helpful if you would like to connect
other devices to the same network. The default setting
is Off.
Highlight Save Wi-Fi Passwords to Amazon and
press Select. Your WLAN password will now be
saved in your account. It can be deleted at any time
by selecting Off.
Turning on your TV via LAN and WLAN
Enable devices and apps that you select to turn on
your TV via LAN and WLAN. Turning this option on
may increase your TV's power consumption.
If you enable network connection this option will also
be enabled automatically. Highlight Turn on with LAN
and Wi-Fi and press Select to disable.
Changing Connection Status
If you did not enable the network connection during
the initial settings process, you can use this option to
enable it. Or you can disable it if you enabled priorly.
Highlight Enable Wi-Fi/Ethernet and press Select
to enable or disable the network connection. Refer
to Connecting to the Internet section if you need
more information.
Basic Wi-Fi Troubleshooting Tips
Here you can view tips like these and restart your Fire
TV. Highlight Basic Wi-Fi Troubleshooting Tips and
press Select.
Display & Audio
This menu houses all the settings and adjustments for
your picture and sound as well as other settings such
as, how your TV powers on, screen mirroring, screen
saver setting and HDMI CEC device control.
Highlight Display & Audio in the Settings menu and
press Select.
Picture Settings
Picture settings can be adjusted on each input, so
each input can be set to have its own picture settings.
For information on adjusting each setting refer to the
Customising TV Settings section of this manual.
For adjusting picture setting while viewing your TV,
press and hold the Home button and select Picture in
the menu on the right hand side of the screen.
Audio Settings
Sound settings can be adjusted here, for information
on adjusting each setting refer to the Customising TV
Settings section of this manual.
For adjusting sound settings while viewing your TV,
press and hold the Home button and select Sound in
the menu on the right hand side of the screen.
Power Control
The Power Control menu has 2 options: Power On
and Alexa Anytime.
Power On: The Power On setting allows you to choose
which state you want your TV to switch on in, either the
last input that you were watching or the Home screen.
Highlight Power On and press Select. Highlight Home
or Last Input and press Select. A tick will appear next
to your choice.
Audio Output
The Audio Output menu has 6 options: TV Speakers,
ARC mode, Digital Audio Format, DTS DRC, AC4
Dialogue Enhancer and Bluetooth Audio Sync.
Highlight Audio Output and press Select.
TV Speakers: In the TV Speakers menu you can
switch your TV's built-in speakers on or off. You
may wish to switch them off if you have connected
a soundbar.
Highlight TV Speakers and press Select to switch the
TV Speakers on or off.
ARC mode: Highlight ARC mode and press Select.
Auto, ARC and eARC options will be available.
Highlight your desired option then press Select. The
default setting is Auto.
Digital Audio Format: Depending on the type of audio
device you have connected you may need to adjust the
audio format that your TV outputs. The audio format
can be changed here.
Highlight Digital Audio Format and press Select.
Highlight your desired audio format PCM, Dolby
Digital, Pass-through and Auto then press Select.
The default setting is Auto.
DTS DRC: The DTS DRC menu enables DTS DRC to
be switched on or off.
English - 15 -