Remote Function - Sanyo DAS202 Instruction Manual

• When complete, you will hear a long beep and the system will return to
normal operation.
Call Breakthrough (CBT)
– The DAS 202 is equipped to alert you to an Urgent call. With CBT, incoming
callers who know your CBT code will have the ability to bypass the Outgoing
message and cause the DAS 202 to sound a short alarm. This is designed
to alert you to an Urgent call if you are home screening your calls. The CBT
code has a factory default of '267'. This code can be changed to any
number between 000 and 999. To change your CBT code perform the
following steps:
• Press the REPT d key for approximately 2 seconds and release to
display the current CBT code. The DAS 202 will then display the
first digit of the CBT code. Use the FF c
increase or decrease the number of the first digit. Once you have arrived
at the desired number, press the 'ANSWER' key to confirm your selec-
tion.
• Repeat the process for the second and third digits.
• If no key is pressed within 8 seconds, the setup procedure will
be aborted.
• When complete, you will hear a long beep and the system will return to
normal operation.
Remote Control Function Operation
– The DAS 202 allows you to perform many of its functions from a remote
telephone. To perform these remote functions, just follow these simple steps:
1. Call the Answering Machine.
2. When the machine answers press '
will sound.
3. Enter the security code (factory default '159') to enter the Remote
Control Mode.
4. Enter the key combination for the desired function as per the
following table:
KEY(S)

REMOTE FUNCTION

1 Play OGM1
2 Play OGM2
3 Room Monitoring (listens to room DAS 202 is in)
4 Repeat or Play Memos
5 Play All Messages or Pause/Play
6 Forward or Play New Messages
7 Erase Individual Messages
8 Stop or Save All Messages
9 Set to Answering Machine OFF Mode
and the REPT d keys to
' to skip the OGM. A long beep
12
KEY(S) REMOTE FUNCTION
1 Record OGM1
*
2 Record OGM2
*
3 Record a Memo
*
4 Change CBT Code
*
6 Change Security Code
*
7 Erase All Messages
*
8 Set to ANSWER ONLY Mode
*
9 Set to ANSWER/RECORD Mode
*
# End Remote Operation
Call Breakthrough Operation (CBT)
– To alert someone to an Urgent Call in the area that the DAS 202 is being
used, follow these steps.
• Call the Answering Machine
• When the DAS 202 answers, press '
• When the OGM stops, enter the CBT Code (factory default '258')
• A two-beep alarm tone sounds on the DAS 202, indicating an Urgent Call.
The user can then simply pick up the phone to end the tone and take
the call.
• The CBT tone ends after 45 seconds. At that time the DAS 202 switches
into ANSWER/RECORD mode and you can leave a message.
• In ANSWER ONLY mode, the call is terminated after the 45 seconds.
• If, during your call, you wish to terminate the CBT function, press the
'#' key. If you wish to reactivate CBT, press the '6' key.
' to skip the OGM.
13