Sanyo MPX-CD92 Instruction Manual page 40

CAMERA SETTING
B3 Setting the monitor masking for each camera
1
Press the MENU button twice to display the (TIMER
SET) menu, then check that the day and night periods
are set as desired. (For more information on the day
and night periods settings, see "TIMER SET" on page
27.)
2
Press the MENU button five times to display the
(CAMERA SET) menu.
3
Press the SELECT (1 – 9) button to select the desired
camera (ex: camera 5).
4
Press the l button to highlight the "MON.MASK"
setting.
1 Press the + (or –) button to set "ON" in the DAY column,
then press the c button.
2 Press the + (or –) button to set "ON" in the NIGHT
column.
5
Press the EXIT button to exit the menu mode and return
to live picture mode, then press the MENU button six
times to display the (MONITOR SET) menu.
6
Press the l button to highlight the "MON.MASK LIVE"
setting.
1 Press the + (or –) button to set "ON" for the "MON.MASK
LIVE" item, then press the l button.
2 Press the + (or –) button to set "ON" for the "MON.MASK
VCR" item.
7
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
CAMERA SET menu
MON. MASK
(Default setting: DAY and NIGHT to OFF)
If in the (MONITOR SET) menu, monitor masking is set to "ON"
for live and/or recorded monitoring, set this item for each camera.
ON: The pictures from this camera will be masked (not
displayed).
OFF: The pictures from this camera will be visible.
English
1
MENU
2
MENU
5, 6
EXIT MENU
Example
01 01 01 02 02 02 03 03 03
04 04 04 05 05 05 06 06 06
07 07 07 08 08 08 09 09 09
01 01 01 02 02 02
03 03 03 04 04 04
39
Menu 7
3, 4
5