Advertisement

Quick Links

LC68BUV50, LC91BUV50, LC91BUV50B, LC91BUV50A, LC91BUV50I,
LC91BUV55
Extractor hood
EN User manual and installation instructions
Register your appliance on My Siemens and
discover exclusive services and offers.
Siemens Home Appliances

Advertisement

Table of Contents
loading

Summary of Contents for Siemens iQ700 LC68BUV50

  • Page 1 LC68BUV50, LC91BUV50, LC91BUV50B, LC91BUV50A, LC91BUV50I, LC91BUV55 Extractor hood EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
  • Page 2: Table Of Contents

    en Safety Table of contents Do not use the appliance: ¡ With an external timer. INFORMATION FOR USE 1.3 Restriction on user group Safety ..............  2 This appliance may be used by children aged 8 or over and by people who have reduced Avoiding material damage........  4 physical, sensory or mental abilities or inad- Environmental protection and saving en-...
  • Page 3: Safety

    Safety en WARNING ‒ Risk of poisoning! WARNING ‒ Risk of fire! Risk of poisoning from flue gases being Fatty deposits in the grease filters may catch drawn back in. Room-air-dependent heat-pro- fire. ducing appliances (e.g. gas, oil, wood or coal- ▶ Never operate the appliance without a operated heaters, continuous flow heaters or grease filter.
  • Page 4: Avoiding Material Damage

    en Avoiding material damage An ingress of moisture can cause an electric WARNING ‒ Risk of injury! shock. Components inside the appliance may have ▶ Before cleaning, pull out the mains plug or sharp edges. switch off the fuse in the fuse box. ▶...
  • Page 5: Environmental Protection And Saving En- Ergy

    Environmental protection and saving energy en If you put incorrect stress on the design elements, they There is a risk of surface damage if you do not peel off may break off. the protective film. ▶ Do not pull design elements. ▶...
  • Page 6: Familiarising Yourself With Your Appliance

    en Familiarising yourself with your appliance Familiarising yourself with your appliance 5  Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operat- ing status.
  • Page 7 Basic operation en 7.6 Switching on the boost function To change the setting, slide your finger over the set- tings area ⁠ . The boost function is a short-term maximum power set- Release to save the setting. ting which can be activated in any fan setting. ▶...
  • Page 8 en Home Connect 7.18 Switching on the audible signal 7.19 Switching off the signal tone Requirement: The appliance is switched off. Requirement: The appliance is switched off. ▶ Press and hold at the same time for ap- ▶ Press and hold at the same time for ap- prox.
  • Page 9: Hob-Based Hood Control

    Hob-based hood control en 8.5 Data protection Notes ¡ The software update consists of two steps. Please see the information on data protection. – The first step is the download. The first time your appliance is registered on a home – The second step is the installation on your appli- network connected to the Internet, your appliance will ance.
  • Page 10 en Cleaning and servicing 10.2 Cleaning the appliance 10.3 Cleaning controls and lights Clean the appliance as specified. This will ensure that WARNING ‒ Risk of electric shock! the different parts and surfaces of the appliance are Penetrating moisture may cause an electric shock. not damaged by incorrect cleaning or unsuitable clean- Do not use wet sponge cloths.
  • Page 11: Troubleshooting

    Troubleshooting en 10.6 Cleaning grease filters in the 10.7 Fitting the grease filters dishwasher ATTENTION! The grease filters filter the grease from the cooking va- Falling grease filters may damage the hob below. pour. Regularly cleaned grease filters guarantee a high Grip below the grease filter with one hand. ▶...
  • Page 12 en Disposal Fault Cause and troubleshooting The appliance is not There has been a power cut. working. ▶ Check whether the lighting in your room or other appliances are working. The LED lighting Different causes are possible. does not work. ▶ Defective LED lights may be replaced by the manufacturer, their customer service or a qualified technician (electrician) only.
  • Page 13: Accessories

    A detailed Declaration of Conformity can be found on- A detailed RED Declaration of Conformity can be found line at siemens-home.bsh-group.com/uk/ among the online at siemens-home.bsh-group.com among the ad- additional documents on the product page for your ditional documents on the product page for your appli- appliance.
  • Page 14: Installation Instructions

    en Installation instructions Installation instructions 16  Installation instructions Installation instructions Observe this information when installing the appliance.  16.3 Secure installation Follow these safety instructions when in- stalling the appliance. WARNING ‒ Risk of poisoning! Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-pro- ducing appliances (e.g.
  • Page 15 Installation instructions en ▶ Unrestricted operation is possible if the ap- cabinet, an upper cabinet or the wall must pliance is operated exclusively in circulat- be at least 50 mm. ing-air mode. WARNING ‒ Risk of injury! Risk of poisoning from flue gases being Components inside the appliance may have drawn back in.
  • Page 16 en Installation instructions Incorrect installation is dangerous. WARNING ‒ Risk of electric shock! ▶ Connect and operate the appliance only in It must always be possible to disconnect the appliance accordance with the specifications on the from the electricity supply. The appliance must only be connected to a protective contact socket that has been rating plate.
  • Page 17 Installation instructions en ¡ To prevent condensate from returning, fit the ex- Drill five holes with a diameter of 8 mm to a depth haust pipe with a 1° gradient from the appliance. of 80 mm for the attachments and push in the wall plugs flush with the wall.
  • Page 18 en Installation instructions Establishing the exhaust air connection (exhaust air Screw in the threaded pin, leaving it protruding out pipe, 150 mm diameter) of the wall by 5–9 mm. ▶ Fit the exhaust air pipe directly to the air-pipe con- nector and seal the joint. Establishing the exhaust air connection (exhaust pipe, 120 mm diameter) Secure the reducing connector to the air-pipe con-...
  • Page 19 Installation instructions en Put the lower flue duct over the upper flue duct. Carefully remove the towels.
  • Page 20 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...

Table of Contents