Brother DCP-L5510DW Quick Setup Manual

D0296N001-00
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum Unit
1
Remove the packing materials and re-install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
NOTE:
Before connecting the power cord,
locate the Serial Number label on
the back or side of the machine.
Record this number for Registration
and Warranty support.
Back
Quick Setup Guide
DCP-L5510DW / MFC-L5710DN / MFC-L5715DN / MFC-L5710DW / MFC-L6710DW /
MFC-L6910DN / MFC-L6915DN / MFC-EX910
UK
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
Video setup instructions:
support.brother.com/videos
Assembly
(Installed in the machine)
Quick Setup Guide
Discard the
silica gel pack.
Adjust the paper
guides.
NOTE:
• The components included in the box may differ depending on your
• The available connection interfaces vary depending on the model.
AC Power Cord
USB Port Cover
(Not included in all models)
• The screens and images in this Quick Setup Guide show the
• Brother aims to reduce waste and save both raw materials and the
Product Safety Guide
Do not exceed this mark.
4
Front
The latest manuals are available at the Brother support website:
support.brother.com/manuals
country.
You must purchase the correct interface cable if you require one.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
• Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
MFC-L6915DN.
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
Remove the orange part.
Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.