Related Manuals for D-Link DPN-1021G
Summary of Contents for D-Link DPN-1021G
- Page 1 Quick Installation Guide DPN-1021G GPON ONT VoIP Gateway with 1 GPON Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port, and 1 FXS Port...
-
Page 2: Before You Begin
IP address of device admin Username (login) Password admin Gateway DPN-1021G with default settings cannot connect to the Internet. To get started, please set your own password for access to the web-based interface; then, if needed, configure other settings recommended by your ISP. -
Page 3: System Requirements And Equipment
DPN-1021G Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the gateway: • ◦ Apple Safari 8 and later ◦ Google Chrome 48 and later ◦... - Page 4 CONNECTING TO PC Invisible laser radiation may be emitted from the end of the fiber and/or from DPN-1021G . Take all necessary precautions to avoid unnecessary exposure to this radiation. 1. Connect an Ethernet cable between the Ethernet port of your PC and the 10/100/1000Base-T port (LAN1) or 10/100Base-TX port (LAN2).
- Page 5 DPN-1021G Quick Installation Guide Obtaining Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 6 DPN-1021G Quick Installation Guide 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button. 7. Click the OK button in the connection properties window.
-
Page 7: Configuring Gateway
DPN-1021G Quick Installation Guide CONFIGURING GATEWAY Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the IP address of the gateway (by default, 192.168.0.1). Press the Enter key. If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“... - Page 8 DPN-1021G Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN...
- Page 9 DPN-1021G Quick Installation Guide The Summary page displays general information on the gateway and its software. The web-based interface of the gateway is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web-based interface of the gateway or in the System / Configuration section of the menu.
-
Page 10: Initial Configuration
DPN-1021G Quick Installation Guide Initial Configuration If the device has not been configured previously or the default settings have been restored, the Initial Configuration page opens automatically upon access to the web-based interface or upon opening a web site on the Internet. - Page 11 DPN-1021G Quick Installation Guide Remember or write down the new password for the administrator account. In case of losing the new password, you can access the settings of the gateway only after restoring the factory default settings via the hardware RESET button. This procedure wipes out all settings that you have configured for your gateway.
-
Page 12: Configuring Connection To The Internet
DPN-1021G Quick Installation Guide Configuring Connection to the Internet When the gateway connects to a fiber optic line, a WAN connection is created and configured automatically. When the gateway connects to an Ethernet line, you should configure your Ethernet WAN connection in accordance with data provided by your Internet service provider (ISP). - Page 13 DPN-1021G Quick Installation Guide 7. If your ISP uses MAC address binding, in the Ethernet section, in the MAC address field, enter the MAC address registered by your ISP upon concluding the agreement. To set the MAC address of the network...
- Page 14 DPN-1021G Quick Installation Guide 8. Static IPv4: In the IPv4 section, fill in the following fields: IP address, Netmask, Gateway IP address, and Primary DNS server. 9. Dynamic IPv4: If your ISP has provided the address of the DNS server,...
- Page 15 DPN-1021G Quick Installation Guide 10. Static IPv6: In the IPv6 section, fill in the following fields: IPv6 Address, Prefix, Gateway IPv6 address, and Primary IPv6 DNS server. 11. Dynamic IPv6: If your ISP has provided the address of the DNS server,...
- Page 16 DPN-1021G Quick Installation Guide PPPoE: In the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 17 DPN-1021G Quick Installation Guide PPTP or L2TP: In the PPP section, enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
-
Page 18: Configuring Local Area Network
DPN-1021G Quick Installation Guide Configuring Local Area Network Go to the Connections Setup / LAN page. If needed, change the IPv4 address of the gateway's LAN interface and the mask of the local subnet. To do this, click the IPv4 tab and specify needed values in the IP address and Subnet mask fields in the IP section. - Page 19 DPN-1021G Quick Installation Guide IPv4 address assignment. By default, the built-in DHCP server of the gateway assigns IPv4 addresses to the devices of the LAN. If you want to manually assign IPv4 addresses, disable the DHCP server (click the IPv4 tab and select the Disable value from the Mode drop-down list in the DHCP section).
-
Page 20: Configuring Voip Via Sip
DPN-1021G Quick Installation Guide Configuring VoIP via SIP 1. Go to the VoIP / Basic Settings page. 2. In the SIP Proxy section, fill in the Address field. 3. If your provider uses a SIP domain, in the SIP Domain section, fill in... - Page 21 DPN-1021G Quick Installation Guide In the Line 1 section, move the Registration switch to the right, fill in the SIP ID / Number field, enter the username in the Username field (as a rule, the username and the phone number are the same), and fill in the Password field.
-
Page 22: Specifications
DPN-1021G Quick Installation Guide SPECIFICATIONS Hardware Processor · RTL9602 · 128MB, DDR3 · Flash 128MB, NAND · GPON port (SC/APC connector) Interfaces · 10/100/1000BASE-T LAN port · 10/100BASE-TX LAN port · RJ-11 FXS port · POWER LEDs · GPON ·... - Page 23 DPN-1021G Quick Installation Guide Phone · Invite with Challenge General SIP features · Register by IP address or domain name of SIP server · Backup proxy support · Support of DHCP option 120 · RFC3986 SIP URI format support ·...
- Page 24 DPN-1021G Quick Installation Guide Software · Static IPv4 / Dynamic IPv4 WAN connection types · Static IPv6 / Dynamic IPv6 · PPPoE · PPTP/L2TP · PPPoE IPv6 · PPPoE Dual Stack · DHCP server/relay Network functions · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation ·...
- Page 25 DPN-1021G Quick Installation Guide Software · Local remote access settings through Management TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface ·...
-
Page 26: Safety Rules And Conditions
DPN-1021G Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents. -
Page 27: Technical Support
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.