Get Started; Connect Power; Turn On - Philips 5000 Series User Manual

12 : In USB/ TF/ Bluetooth mode, press to
pause or resume play; in FM mode, long press
to search and save FM channels automatically;
press to select the saved channel. During
recording, press to pause or resume record.
13 DBB: Press to switch between DBB1, DBB2 and
DBB off.
14 Mic vol: Adjust the microphone volume in any
mode.
15 Vol: Adjust the speaker volume.
16 : Press to switch to BT mode. Long press to
disconnect from the current BT connection.
17 : Press to change speaker light mode 1/ 2/
3/ 4/ 5/ Off. Long press to turn on/off strobe
light.
18 LED display : Show the current status.
19 : Press to select the input source between
Bluetooth/ FM radio/ Aux/ USB/ TF .
20 : Long press to turn on or turn off the speaker.
21 : In the Bluetooth mode, long press both
speakers to enter/ exit TWS mode.
22 Voice fader : Eliminate the human voice.
23 Voice changer : Change the MIC tone.
24 Record : Short press to record the microphone
audio to USB or TF card; short press again to stop
the recording and return to the current source.
Long press to play the record content. When
playing the record content, long press to delete
the record content.
Overview of the main unit
Rear panel:
1 AC IN: Connect the AC cable to get power
supply.
2 FM ANT: For FM radio.

3 Get started

Caution
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous laser exposure or other unsafe
operation.
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for
the model and serial number of this
apparatus. The model number and serial
number are on the back of the apparatus.
Write the numbers here:
Model No.
Serial No.

Connect power

Caution
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
Risk of electric shock! When you unplug the
power cord, always pull the plug from the
socket. Never pull the cord.
Note
Before connecting to AC power, make sure that
you have completed all other connections.
Connect the AC power cord to the AC in socket
on the rear panel of the unit.
Then plug the other end of the AC power cord
into a power outlet.
Power outlet socket and plug of power cord vary
by regions.

Turn on

Long press the button on top panel to turn
on/off the speaker.
6 EN