Sharp AL-1642CS Operation Manual page 71

Bit depth
Sensor
Scanning speed
Memory
Power supply
Power consumption
Overall dimensions
Weight (Approximately) *
Unit dimensions
Operating conditions
Emulation
Interface port
Noise level
Emission concentration
(measurement according to
RAL-UZ 62: Edition Jan. 2002)
1
* Feed paper lengthwise only.
2
* Leading and trailing edges.
3
* Along the other edges in totals.
4
* Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11" (A4)
plain paper in the tray 1 and performing continuous one-sided printing of the same page.
5
* The copy time in the case when the power is turned on and copying using the document
glass is started immediately after the power save indicator goes off (8-1/2" x 11" (A4), paper
fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
6
* Not including TD and drum cartridges.
• As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Width
Depth
6
Width
Depth
Height
1 bit or 8 bit/pixel
Color CCD
Max. 2.88ms/line
8 MB
120V, 60Hz, 9.5A
Max. 1.0kW
23.9" (607.6mm)
19.4" (492.5mm)
50.7 lbs. (23kg)
20.4" (518mm)
19.4" (492.5mm)
18.3" (465.4mm)
Temperature: 50°F to 86°F (10°C to 30°C)
Humidity: 20% to 85%
SHARP GDI
USB interface (USB1.1 Standard) /
IEEE1284-compliant bi-directional parallel
interface (Only for printer)
Sound Power Level L
wA
Copying mode: 6.3B or less
Standby mode: 4.0B or less
Noise emission measurement in accordance with
ISO 7779.
3
Ozone:0.02 mg/m or less
3
Dust:0.075 mg/m or less
3
Styrene:0.07 mg/m or less
9
69