Ip Address Setting ([1]Ip Address); Subnet Mask Setting ([2]Subnet Mask); Default Gateway Setting ([3]Default Gateway) - Sharp XG-MB70X Setup Manual

Controlling the Projector Using RS-232C or Telnet
The setting procedure for each item will be explained. For the basic procedure, please refer
to "Set Items" on page 20.
IP Address Setting
([1]IP Address)
Setting of IP address.
setup>1
IP Address :192.168.150.2
Please Enter :192.168.150.3
(change) —> 192.168.150.3
1 1 1 1 1 Enter "1" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
setup>2
Subnet Mask :255.255.255.0
Please Enter :255.0.0.0
(change) —> 255.0.0.0
1 1 1 1 1 Enter "2" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display subnet mask after change (*).
-22
Default Gateway Setting
([3]Default Gateway)
Setting default gateway.
1
setup>3
note: "0.0.0.0" means "Using no default gateway."
2
Gateway Address :0.0.0.0
Please Enter
*
(change) —> 192.168.150.1
1 1 1 1 1 Enter "3" and press the "Enter" key.
2 2 2 2 2 Enter numerical value to be set and press the
"Enter" key.
Display gateway address after change (*).
Note
• If the values for IP Address, Subnet Mask or Gate-
way of the projector have been changed via Telnet,
the computer for controlling cannot be connected
to the projector depending on the computer's net-
work settings.
1
2
*
:192.168.150.1
1
2
*