Chapter 1. Installing And Configuring Your Printer; Installation Prerequisites - Toshiba 1TN Quick Installation Manual

Tcx single station printer
Table of Contents

Advertisement

Chapter 1. Installing and configuring your printer

Installing and configuring your printer
This section provides information on installing and configuring the Toshiba 6145 printer. Before
you begin, be sure to read the Safety Information-Read This First, GC32-0609.
To install the 6145 printer:
1.
Complete all installation prerequisites (see "Installation prerequisites" on page 9).
2.
If applicable, install the 58 mm wide paper kit (see "Installing the 58 mm wide paper roll
guide (optional)" on page 10 and "Installing the 58 mm wide paper guide (optional)" on
page 11).
3.
If applicable, install the wall mounting bracket to the wall (see "Installing the wall mounting
bracket (optional)" on page 11).
4.
If applicable, set up the wall mount orientation setup for the paper low sensor (see
"Configuring the paper low sensor for wall mounting" on page 14).
5.
If applicable, install the printer option card (see "Installing an optional interface adapter
card" on page 14).
6.
If applicable, connect the communication cables (see "Connecting communication cables"
on page 15).
7.
If applicable, connect the AC adapter.
Note: The printer can be powered via a PoweredUSB or an AC adapter. If your printer was
shipped with an AC adapter, connect the adapter now.
8.
Power on the host system and the printer.
Note: The printer will power on automatically when the power is applied or when an
attached USB host is powered on. You do not have to physically power on the printer.
9.
If applicable, set up any network options (see "Setting up network options (if applicable)"
on page 16).
10. Configure the printer (see "Configuring the printer" on page 20).
11. Install driver and other solution components.
Note: Multiple driver options are available for your printer. For details about installing
drivers, see the driver documentation.

Installation prerequisites

Before you begin installing your Toshiba TCx Single Station printer, complete the following
steps.
1.
Unpackage the printer and options.
2.
Verify that the contents of your package includes the following components:
• TCx Single Station Printer
• Toshiba Safety Information manual and additional regulatory documents
• Customized printer options per your order (can be packaged separately), including:
3.
Remove the packing material from the printer.
Copyright Toshiba Global Commerce Solutions, Inc.
©
– Optional interface adapter card (Ethernet, WiFi, or RS-232)
– Filler panel
– Cables
– Power adapter
– 58 mm wide paper kit
– Wall mounting bracket
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6145

Table of Contents