Sharp EL-6850 Operation Manual page 32

• The indication "WORKING..." shown on the side of the
receiving Organizer at the beginning or end of the data
transmission means that the memory has begun to be
freed up automatically.
2. Transferring Data between Organizers
The single data entry or entire data in a mode (TEL, E-MAIL,
WWW, SCHEDULE, MEMO, ANN) can be transferred between
Organizers.
• Turn both of the Organizers off first before connecting
them with the optional cable. (CE-260L)
30
• When an error occurs, "I/O DEVICE ERROR!" is displayed
on the receiving or transferring Organizer, or on both
ones.
1. Press the desired mode key, or recall a listing to be
transferred on the transferring Organizer.
• To transfer all the data by mode, press the mode key to
display the entry prompt. To transfer the data by entry,
recall the desired listing.
2. Press on
2nd OPTION
both the Organizers.
The following menus are
displayed.
3. Press on the receiving
2
Organizer to select RECV
(RECEIVE).
4. Press on the transferring Organizer to select SEND.
1
< >
UNIT TO UNIT
1 SEND 4 BACKUP
2 RECV 5 RESTORE
CAPS
3 VERIFY
< >
UNIT TO UNIT
RECEIVING
CAPS
MODE