Sharp Zaurus SL-5500 Software Manual page 29

• Select cell
A single cell can be selected with the stylus, keyboard or formula bar.
- Stylus : Selects the desired cell by tapping the cell.
- Formula bar : You can select a cell in the formula bar by selecting the
coordinates of the cell in the name list box.
• Selecting a Consecutive Area
- Area : An area means the selection of two or more cells. You can select a
continuous area by tapping down with the stylus and dragging the area you
want to select. Lets try selecting continuous cells B2~D5 by following the
instructions below.
① Press on cell B2.
While pressed,
②
inverted, indicating that the cells are selected.
Reference
1. The consecutive area is indicated with the colon(:). placed between
the cell coordinates. Example: Cells B2 to D7 are shown as B2:D7.
If you set 'the cell on the very top left : the cell on the very right
bottom', the cells within this area will be indicated in the coordinates.
2. To exit the area selected, use the stylus to select another cell that
is not selected.
- Rows and Columns : To designate multiple continuous rows and columns,
select the column header or row header, and drag the stylus upward/
downward or to the left/right.
CHAPTER 3:
drag the stylus diagonally to cell D5. The color of the area is
HancomMobileSheet
29