Phone Setup; Phone Identity; Call Screening - Siemens M75 User Manual

Setting up call divert (example)
Unanswered
Select Unanswered.
(Includes the conditions
I
Not reachable,
Busy, see below)
Confirm and select Set,
C
then enter the phone
number to which the call
will be diverted.
Confirm. The setting is
§OK§
confirmed by the
network.
All calls
All calls are diverted.
Icon in the top line of the
display in standby mode.
Ç
Other possibilities for divert:
Not reachable, No
Receiving fax, Receiving data

Call screening

Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key (except for
Minute beep
During the call, you (and only you)
will hear a beep after each minute as
a reminder of the time elapsed.
No reply,
reply, Busy,
B

Phone setup

b
¢
C
¢
Key tones
Set the type of acoustic key
acknowledgement.
Info tones
Set service and alarm tones.
Auto off
The phone switches off each day at
b
the set time.

Phone identity

The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Device check
After the last information page, a
b
self-test as well as individual tests
are offered. If you select Selftest, all
individual tests are carried out.
Software version
Display in standby mode:
*
# 0 6 #, then press §More§.
).
Memory assis.
The delete assistant will help you if
there is insufficient phone memory.
Setup
¢
Phone setup
T
Select function.
43