Saving VoIP access data
If "Update firmware?" is shown in the display, an updated firmware is already available on
the Internet for your phone. Press the right-hand Display key §Yes§.
The new firmware will be loaded. The process takes approx. 3 minutes. The Message key
f
will now flash again.
>
Press the Message key
9
Starting the connection wizard, entering the PIN
Start VoIP
connection
wizard?
No
>
Press the key below
(= right Display key).
If the connection wizard does not start properly, you can start it via the menu:
m
¢
§Menu§
Settings
f
to start configuration.
Yes
on the display
§Yes§
¢
¢
Base
Telephony
System PIN:
[ _ _ _ _ ]
Ç
>
Using the Number keys, enter the base
station's system PIN. The default PIN is
"0000".
>
Press the right-hand Display key §OK§.
¢
Connection Wizard
13
OK