Cruising In Other Conditions - Yamaha Z300A 2003 Owner's Manual

Operation
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU28182
Procedure for power trim and tilt/power
tilt models
1. Place the gear shift lever in neutral.
2. Slightly tilt the outboard motor up to the
desired position using the power trim / tilt
switch.
UP
UP
DN
39
UP
3. To return the outboard motor to the nor-
mal running position, press the power
trim / tilt switch and slowly tilt the out-
board motor down.
EMU28190

Cruising in other conditions

Cruising in salt water
After operating in salt water, wash out the
cooling water passages with fresh water to
prevent them from becoming clogged with
salt deposits.
NOTE:
For cooling system flushing instructions, see
page 41.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
if you use the outboard motor in turbid (mud-
ZMU01935 dy) water conditions.
UP
ZMU01888
ZMU01954