1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 55LV75D
  6. Manual

LG 55LV75D Manual

Hide thumbs Also See for 55LV75D:
Table of Contents

Advertisement

Quick Links

Download this manual
LG Digital Signage
(MONITOR SIGNAGE)
55LV75D
55LV77D
AAA
(M6 x L10)
(M4 x L6)
Depending upon country / Závisí na zemi / Afhængigt af landet / En función del país /
Maan mukaan / Selon pays / Abhängig vom Land / Ανάλογα με τη χώρα / Országfüggő /
Tergantung pada negaranya / A seconda del Paese / Елге байланысты / 지역에 따라 다름 /
Afhankelijk van het land / Avhengig av land / Zależnie od kraju / Dependendo do país /
В зависимости от страны / Závisí od krajiny / Beroende på land / 視國家, 地區而定 /
Ülkeye bağlı
/ Залежно від країни / Mamlakatga bog'liq ravishda / 国によって異なります /
Depende do país / ‫/ תלוי במדינה‬
*MFL70344501*
P/No: MFL70344501 (1712-REV01)

Advertisement

Table of Contents
loading

Related Manuals for LG 55LV75D

Summary of Contents for LG 55LV75D

  • Page 1 LG Digital Signage (MONITOR SIGNAGE) 55LV75D 55LV77D (M6 x L10) (M4 x L6) Depending upon country / Závisí na zemi / Afhængigt af landet / En función del país / Maan mukaan / Selon pays / Abhängig vom Land / Ανάλογα με τη χώρα / Országfüggő / Tergantung pada negaranya / A seconda del Paese / Елге...
  • Page 2 아래의 사이트를 참조하세요. (키워드 : LV75D, LV77D) Nederlands U kunt de internethandleidingen voor dit product vanaf de volgende websites downloaden. (Term : LV75D, LV77D) Norsk Du kan laste ned webhåndbøker for dette produktet fra de følgende webområdene. (Nøkkelord : LV75D, LV77D) • www.lg.com/b2b...
  • Page 3 (Kalit so’z : LV75D, LV77D) 日本語 この製品のWeb版取扱説明書は次のWebサイトからダウン ロードできます。 (キーワード : LV75D, LV77D) Português Você pode fazer download dos manuais na Web deste produto nos Do Brasil seguintes sites. (Palavra-chave : LV75D, LV77D) ( LV75D, LV77D ( LV75D, LV77D • www.lg.com/b2b SuperSign : http://partner.lge.com...
  • Page 5 Network...
  • Page 7 (TAIWAN ONLY) 限用物質含有情況標示聲明書 設備名稱：液晶彩色顯示器，型號（型式）： 限用物質及其化學符號 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚 單元 (Pb) (Hg) (Cd) (PBB) (PBDE) 電路板 ○ ○ ○ ○ ○ 外殼, 支架 ○ ○ ○ ○ ○ ○ 玻璃面板 ○ ○ ○ ○ ○ 配件(例：纜線, 遙控器) ○ ○...
  • Page 9 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 55LV75D 55LV77D www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.

  • Page 10: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS ....3 - Precautions In Installing the Product .....3 - Precautions to the AC Adapter and Electrical Power ..................5 - Precautions In Moving the Product ......7 - Precautions In Using the Product ......8 - Mounting on a Wall ............9 LICENSES ........

  • Page 11: Safety Precautions

    Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
  • Page 12 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.

  • Page 13: Precautions To The Ac Adapter And Electrical Power

    - If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock.
  • Page 14 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.

  • Page 15: Precautions In Moving The Product

    Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...

  • Page 16: Precautions In Using The Product

    Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...

  • Page 17: Mounting On A Wall

    • Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. CHEMICALS WATER • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its electrical shock.

  • Page 18: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

  • Page 19: Assembly And Preparation

    SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment.

  • Page 20: Parts And Buttons

    Parts and Buttons The image may be different according to the model.

  • Page 21: Portrait Layout

    Portrait Layout When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE • Keep the removed L-brackets and use them when moving the monitor later.

  • Page 22: Storage Method For Panel Protection

    Storage Method for Panel Protection Correct Method If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel to touch the floor. Panel When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.
  • Page 23 Incorrect Method If the product is tilted onto the bezel, the bottom of the panel may be damaged. Panel If the product is tilted onto the edge of the panel, the panel may be damaged. Panel...

  • Page 24: Installing On A Wall

    Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.

  • Page 25: External Equipment Setup

    EXTERNAL EQUIPMENT SETUP IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
  • Page 26 How to Join Sets Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) After joining the sets, use the tiling guide to adjust the gap between the sets. Now the 2 x 2 tiling is complete.

  • Page 27: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
  • Page 28 Selects the Picture Mode. Views the information of the currently program and the screen. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input.

  • Page 29: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.
  • Page 30 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15- pin cable and DVI-D/HDMI cable. •...

  • Page 31: Daisy Chain Monitors

    Daisy Chain Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. Monitor 1 Monitor 2 Monitor 3...

  • Page 32: Troubleshooting

    TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Power is on, but the screen appears • Adjust brightness and contrast again. extremely dark. •...
  • Page 33 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
  • Page 34 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.

  • Page 35: Product Specifications

    Storage Temperature -20 °C to 60 °C Storage Humidity 5 % to 85 % Power Rated power 55LV75D AC 100-240 V ~ 50/60 Hz, 2.1 A 55LV77D AC 100-240 V ~ 50/60 Hz, 3.1 A Power consumption 55LV75D On Mode: 160 W (Typ.) Sleep Mode: ≤...
  • Page 36 RGB (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 640 x 480 31.469 59.94 720 x 400 31.468 70.8 800 x 600 37.879 60.317 1024 x 768 48.363 1152 x 864 57.717 59.934 1280 x 720 44.772 59.855 1280 x 960 1280 x 1024 63.981...
  • Page 37 NOTE • When the cable is connected to the DVI-D, HDMI or the DisplayPort, you can select the PC/DTV mode optionally. It is recommended that you select PC mode when connecting to a PC and select DTV mode when connecting to other devices.
  • Page 38 ENERGY STAR® is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency (EPA). As an ENERGY STAR® Partner LGE U. S. A., Inc. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®...
  • Page 39 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
  • Page 40 Contents ACCESSING INSTALLATION MENU .........3 INSTALLATION MENU ....4 - LG Digital Signage Setup Menu ........ 4 - USB Cloning ..............12 - Password Change ............17 - Set ID Setup..............18 - Configuration Setup ...........19 - Lock Mode ..............20 - External Speaker ............21 - Fail Over ................22...

  • Page 41: Accessing Installation Menu

    HDMI (DTV) No Signal When the Installation Menu is displayed, select the desired item. Installation Menu (V 3.0) Installation Menu (V 3.0) LG Digital Signage Setup LG Digital Signage Setup SuperSign Server Setup USB Cloning Holiday Schedule Password Change No Signal Image...

  • Page 42: Installation Menu

    Installation Menu NOTE Default values may differ by region. LG Digital Signage Setup Menu Use this menu to configure the Digital Signage after installation. Installation Menu (V 3.0) Installation Menu (V 3.0) LG Digital Signage Setup LG Digital Signage Setup...
  • Page 43 IR Operation / Local Key Operation This feature allows you to set how the product operates after receiving a signal from a LG remote control or local key. (0 - Normal, 1 - Use PWR Only, 2 - Block All) Selecting 'Block All' blocks any signal coming from a LG remote control/local key.
  • Page 44 Menu Display Setting this feature to Yes will display the menu. Setting this feature to No will hide the menu. However, even if you have set this feature to No, you can easily open the Installation Menu by pressing and holding the Menu button for more than 5 seconds.
  • Page 45 Wake On LAN Set whether to use the 'Wake On LAN' feature. You can set 'Wake On LAN' to On or Off. If you set this feature to On, 'Wake On LAN' is enabled and you can turn the product on remotely via a LAN. If you set this feature to Off, 'Wake On LAN' is disabled.
  • Page 46 Intelligent Auto You can set this feature to On (enabled) or Off (disabled). If you change the screen resolution after setting this feature to 'Yes' , the display is automatically adjusted to the new resolution. (This feature may not be available with some models.) Master/Slave Mode This feature allows you to sync monitors connected via RS-232C.
  • Page 47 Sync Mode This feature allows you to sync the start times of contents (videos or images that have been distributed by SuperSign Software) played back on the Master and Slave monitors. If you set Sync Mode to Off, the sync feature is disabled. A Slave monitor plays contents at the same time as the Master monitor.
  • Page 48 Factory Reset This feature allows you to restore all set values to their factory default values. If you set this feature to Yes, all Signage settings except UTT setting (the Signage panel's operational hours) are restored to their factory default settings. (This feature may not be available with some models.) All user settings will be reset.
  • Page 49 Initial setting/ Signage Mode Opera- LG Digital Signage Setup tion Factory Reset Signage Mode Operation Yes/No Power On Status STD/PWR/LST User Key Operation Yes/No User IR Operation Normal/Use PWR Only/Block All Normal User Normal Local Key Operation Normal/Use PWR Only/Block All...

  • Page 50: Usb Cloning

    - If you check the EPK item, the Display EPK Version , SPI Boot, and LG Boot Logo items are enabled. - If you check both the EPK and JPG items, the LG Boot Log item is disabled; if you uncheck the JPG item after wards, LG Boot Log item is enabled.
  • Page 51 Current : 02.00.00.01 EPK : 02.00.00.01 [TLL] GlobalClone99999.TLL [ Forced Update Option ] SPI Boot [EPK] M1A_ATSC_KR_RevNo2800_V01... LG Boot Logo [No Signal Image] Max Size : 1024KB Total Size : 0KB [ISM Bar Image] Max Size : 1024KB Total Size : 0KB...
  • Page 52 Send to USB Send To USB USB Cloning Select file type Ez Download Global TLL Receive from USB Model TLL Send to USB Select the file name and press OK to start Logo Image Download ꔠ Send to Daisy Chain GlobalClone00001.TLL ꔡ...
  • Page 53 Logo Image Download This feature allows you to download splash image files onto your monitor. Create a 'LG_MONITOR' folder on your USB flash drive and copy a splash image file into the folder. Select the desired image file using the buttons and press the OK button.
  • Page 54 Send to DaisyChain This feature allows you to copy the settings of a monitor to other monitors using RS-232C. Transfer the settings of your current monitor to other linked monitors via RS-232C outputs. The settings of the foremost monitor are copied, while the settings for other monitors in the RS-232C daisy-chain are not. Select Send to DaisyChain, then select Yes to transfer the data or select No to go back to the previous menu.

  • Page 55: Password Change

    You can change your password for security purposes. Enter a new 4-digit number in Change Password. Enter the same number again in Confirm Password to confirm the password. Installation Menu (V 3.0) Password Change LG Digital Signage Setup USB Cloning Change Password Password Change Password Change...

  • Page 56: Set Id Setup

    Set ID Setup This feature allows you to set an ID for the product. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Set ID Setup Password Change Set ID Setup Set ID Setup Set ID Lock Configuration Setup...

  • Page 57: Configuration Setup

    It is recommended that you set this feature to Off if you intend to use the product for long periods of time. Screen Saver Cube This Screen Saver feature lets you enable/disable the 360-degree-rotating LG Cube which appears on the screen when there is no signal.

  • Page 58: Lock Mode

    Lock Mode This feature allows you to select an input that you want to restrict. The selected input is automatically restricted ac- cording to your settings. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Lock Mode Password Change...

  • Page 59: External Speaker

    External Speaker This feature enables the transfer of analog/digital audio signals from your monitor to external devices. Installation Menu (V 3.0) External Speaker LG Digital Signage Setup Output Control USB Cloning Password Change Previous Set ID Setup Configuration Setup Lock Mode...

  • Page 60: Fail Over

    Fail Over This feature enables automatic switching to another input signal when there is no signal from the current input. Installation Menu (V 3.0) LG Digital Signage Setup Fail Over USB Cloning Password Change Mode Set ID Setup Configuration Setup...
  • Page 61 NOTE The number of priorities may vary depending on the model. If you set Mode to Off, all of its sub-options are disabled. If you set Mode to Auto, the Priority menus are disabled. If you set USB to Movie or Photo, the USB Auto Playback option in Configuration Setup is disabled, and the corre- sponding function is also disabled.

  • Page 62: Ism Method

    If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Installation Menu (V 3.0) ISM Method LG Digital Signage Setup Mode Normal USB Cloning...
  • Page 63 Timer Immediately: Performs the ISM function immediately after the ISM Method menu window disappears. The Period/Time option is disabled. a) Inversion: Inverts the screen every 30 minutes. b) Orbiter: The image moves 3 pixels every 2 minutes in a certain order. c) User Image: Displays the image on repeat until you press the EXIT button on your remote control.
  • Page 64 Bar Image Off: Displays a bar with a fixed resolution of 300 x 1080, then moves the bar. On: Displays a user-downloaded image, and moves the image. NOTE Images can be displayed at your desired size without a size limit. (However, the image height is fixed at 1080.) If only one image is downloaded, the image is displayed alone and the bar moves.
  • Page 65 User Image This feature enables the playback of your desired photos and movies using your USB storage device. (If you select User Image, the contents options of Movie and Photo are enabled. - Movie: Plays movies stored in the ISM (or ism) folder on your USB storage device - Photo: Plays a slide show of images stored in the ISM (or ism) folder on your USB storage device.

  • Page 66: Easy Brightness Control

    Easy Brightness Control The backlight is adjusted according to your schedule(s). Easy Brightness Control Easy Brightness Control Installation Menu (V 3.0) Mode Mode Configuration Setup Hour Hour Lock Mode Minute Minute External Speaker Backlight Backlight Fail Over ISM Method Add Schedule Add Schedule Easy Brightness Control Easy Brightness Control...

  • Page 67: Supersign Server Setup

    SuperSign Server Setup This feature is designed for linkage with SuperSign Manager. Installation Menu (V 3.0) Configuration Setup Lock Mode External Speaker SuperSign Server Setup Fail Over ISM Method Player Name Press OK Easy Brightness Control Server IP Setting Press OK SuperSign Server Setup Server IP Status SuperSign Server Setup...

  • Page 68: Holiday Schedule

    Holiday Schedule This feature allows you to specify holidays (unit: day) when the product will not be used. Installation Menu (V 3.0) Holiday Schedule Holiday Schedule Configuration Setup Add Schedule Lock Mode Add Schedule External Speaker January 1 ~ January 1 ------------------- Fail Over -------------------...

  • Page 69: No Signal Image

    No Signal Image This feature allows the screen image to be changed when there is no signal. No Signal Image Installation Menu (V 3.0) Disable Configuration Setup No Signal Image Lock Mode Mode Original External Speaker Slide Time 5 sec Fail Over Previous ISM Method...

  • Page 70: Digital Signage Media Player

    Digital Signage Media Player The Digital Signage Media Player can play content produced and distributed by SuperSign Elite-W. Supported content types include external inputs, texts and music as well as photographs, videos and Signage Monitor. Executable content *.cts: These files can be played at any time. *.sce: These files can be played at any time like *.cts files or they can be played to a specific schedule.
  • Page 72 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
  • Page 73 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

  • Page 74: Using The Monitor

    USING THE MONITOR Using the Input List Press INPUT to access the Input List. Press the navigation buttons to scroll to one of the input mode and press OK. RGB-PC HDMI DVI-D Display Port NOTE • Some input signals may not be supported depending on the model. Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
  • Page 75 16:9 : This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image.

  • Page 76: Entertainment

    ENTERTAINMENT To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything), Using the Network Connecting to a wired network Press SETTINGS to access the main menus. Connecting to a Network Press the navigation buttons to scroll to NET- For wired network connections, connect the WORK and press OK.
  • Page 77 Select an AP to connect to a wireless network. service. For details, contact your ISP. - Simple setting (WPS-button mode) LG is not responsible for any malfunction of the display and/or the internet connection feature due Press the button on the wireless router that to communication errors/malfunctions associated supports PBC to easily connect to the router.

  • Page 78: Network Status

    Using the My Media Tips for Wireless Network Setting Wireless networks can be subject to interfer- ence from other devices operating at a fre- Connecting USB storage devices quency of 2.4 GHz (wireless phones, Bluetooth devices, or microwave ovens). There may also Connect USB storage devices such as a USB flash be interference from devices with a frequency memory, external hard drive to the display and use...
  • Page 79 If your USB memory device has multiple parti- Tips for using USB storage devices tions, or if you use a USB multi-card reader, Only a USB storage device is recognizable. you can use up to 4 partitions or USB memory If the USB storage device is connected through devices.

  • Page 80: Browsing Files

    Browsing Files Browse files saved in a USB storage device. Press SETTINGS to access the main menu. Press the search button to scroll to MY MEDIA and press OK. Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and press OK.
  • Page 81 Type Supported file format JPEG Photo : 64 x 64 : Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) : 64 x 64 : 9600 x 6400 : 64 x 64 : Interlace: 1200 x 800 Non-Interlace: 9600 x 6400 Non-supported files are displayed in the form of predefined icon.

  • Page 82: Viewing Movies

    Viewing Movies Plays movie files saved in the USB storage device. Press SETTINGS to access the main menu. Press the navigation button to scroll to MY MEDIA and press OK. Press the navigation button to scroll to Movie List and press OK. Press the navigation buttons to scroll to a folder you want and press OK.
  • Page 83 Tips for using playing video files Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the supported languages are not available. The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
  • Page 84 Select Set Video Play to access the following menus: Menu Description Picture Size Selects your desired picture format during movie play. Audio Changes the Language Group of the audio during movie play. Files with a single audio Language track cannot be selected. Subtitle Turn on/off the subtitle.

  • Page 85: Viewing Photos

    Viewing Photos View image files saved in the USB storage device. Press SETTINGS to access the main menu. Press the navigation button to scroll to MY MEDIA and press OK. Press the navigation button to scroll to Photo List and press OK. Press the navigation buttons to scroll to a folder you want and press OK.
  • Page 86 Photo options Press SETTINGS to show the Option menus. Press the navigation buttons to scroll to Set Photo View, Set Video, or Set Audio, and press OK. NOTE The option values changed in Movie List do not affect Photo List or Music List. Therefore, they are not affected by option values changed in Photo List or Music List.

  • Page 87: Listening To Music

    Listening to Music Plays music files saved in the USB storage device. Press SETTINGS to access the main menu. Press the navigation button to scroll to MY MEDIA and press OK. Press the navigation button to scroll to Music List and press OK. Press the navigation buttons to scroll to a folder you want and press OK.
  • Page 88 Tips for playing music files This unit cannot support the ID3 Tag embedded MP3 files. NOTE A damaged or corrupted music file does not play but displays 00:00 in playtime. A music downloaded from a paid service with copyright protection does not start but displays inappropriate informa- tion in playtime.

  • Page 89: Viewing The Contents List

    Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager. Press SETTINGS to access the main menu. Press the navigation button to scroll to MY MEDIA and press OK. Press the navigation button to scroll to Contents List and press OK. Press the navigation buttons to scroll to a folder you want and press OK.
  • Page 90 Video files larger than 50 MB may not upload properly from mobile devices. We recommend that you play such files via USB/SD storage devices. • [For Ultra HD models only] Ultra HD image: 3840 X 2160 Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not be played. Extension Codec .mkv...

  • Page 91: Customizing Settings

    CUSTOMIZING SETTINGS Accessing Main Menus SETTINGS Press to access the main menus. Press the navigation buttons to scroll to one of the following menus and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. When you are finished, press EXIT.

  • Page 92: Picture Settings

    PICTURE Settings Press SETTINGS to access the main menus. Press the navigation buttons to scroll to PICTURE and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT.
  • Page 93 Setting Description Screen Customizes the PC display options in RGB mode. (In RGB Option Mode Only) Resolution Selects a proper resolution. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress.
  • Page 94 Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration) Setting Description Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image. Dynamic Color Adjusts color for more natural-looking colors. Color Gamut Selects the range of colours that can be expressed. Skin Color Skin color spectrum can be separately set to implement the skin color as defined by the user.

  • Page 95: Audio Settings

    - Sound Effect function is available only for Standard mode in Sound Mode menu. Level Clear Voice ll Boosts voice clarity. Virtual Surround LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. If Clear Voice ll is set to On, Virtual Surround will not be chosen.

  • Page 96: Time Settings

    TIME Settings Press SETTINGS to access the main menus. Press the navigation buttons to scroll to TIME and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT.

  • Page 97: Option Settings

    OPTION Settings Press SETTINGS to access the main menus. Press the navigation buttons to scroll to OPTION and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT.
  • Page 98 SETTINGS Description Contents Schedule Creates simple schedules and sets playback using files in My Media. Level Add Schedule Creates a contents schedule. - Media: Select the file to which you want to apply the contents schedule. - Select [Create] to register the contents schedule. Play Plays a contents schedule.
  • Page 99 Tile Mode This monitor can be tiled with additional monitors to create a large tiled display When using 9 monitors When using 2 monitors When using 4 monitors When the Tile Mode option is disabled ID 3 ID 2 ID 2 ID 2 ID 1 ID 1...

  • Page 100: Network Settings

    NETWORK Settings SETTINGS Press to access the main menus. Press the navigation buttons to scroll to NETWORK and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT.

  • Page 101: Picture Id Settings

    PICTURE ID Settings NOTE Only applies to certain models. If PICTURE ID is set to 2, only the upper PICTURE ID is used to change the settings of a right monitor, which has a Set ID of 2, can be specific set (display) using a single IR receiver for controlled by IR signals.

  • Page 102: Ir Codes

    IR CODES All models do not support the HDMI/USB function. Some key codes are not supported depending on the model. Code (Hexa) Function Note R/C BUTTON (Power) INPUT R/C BUTTON MONITOR ON R/C BUTTON MONITOR OFF R/C BUTTON R/C BUTTON ENERGY SAVING ( R/C BUTTON 10 to 19...
  • Page 103 Code (Hexa) Function Note R/C BUTTON R/C BUTTON Red Key (PICTURE ID ON) R/C BUTTON Green Key (PICTURE ID OFF) R/C BUTTON Yellow Key R/C BUTTON Blue Key R/C BUTTON...

  • Page 104: To Control Multiple Products

    TO CONTROL MULTIPLE PRODUCTS Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture.

  • Page 105: Rs-232C Configurations

    Communication Parameter RS-232C Configurations Baud Rate : 9600 BPS • 4P Cable Data Length : 8 bit • • Parity Bit : None 4-Wire Configurations (Standard RS-232C cable) Stop Bit : 1 bit • Flow Control : None • • Communication Code : ASCII code •...

  • Page 106: Command Reference List

    Command Reference List COMMAND DATA (Hexadecimal) Power 00 to 01 Select input See [Select input] Aspect ratio See [Aspect ratio] Energy saving See [Energy saving] Picture mode See [Picture mode] Contrast 00 to 64 Brightness 00 to 64 Sharpness 00 to 32 Color 00 to 64 Tint...
  • Page 107 COMMAND DATA (Hexadecimal) Software version White balance red gain 00 to FE White balance green gain 00 to FE White balance blue gain 00 to FE Backlight 00 to 64 Screen off 00 to 01 Tile Mode See [Tile Mode] Tile Mode Check Tile ID Refer to ‘Tile ID' .

  • Page 108: Transmission / Receiving Protocol

    Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] Identifies the factory setting and the user setting modes. * [Command2] Controls monitors. * [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under OPTION in the OSD menu.
  • Page 109 01. Power (Command: k a) 04. Energy saving (Command: j q) Controls the power on/off of the set. Sets the energy saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off Data 00: Off 01: On 01: Minimum 02: Medium 03: Maximum...
  • Page 110 07. Brightness (Command: k h) 10. Tint (Command: k j) Adjusts the screen brightness. Adjusts the screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Data 00 to 64: Tint red 50 to green 50 Acknowledgement Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 111 16. Balance (Command: k t) 13. V position (Command: f r) Adjusts the sound balance. Adjusts the vertical position of the screen. This function is only available when the Tile Mode is set to Off. * The operational range varies depending on the RGB input Transmission resolution.
  • Page 112 19. Volume (Command: k f) 22. Off time schedule (Command: f c) Adjusts the playback volume. Enables/disables the on time schedule. Transmission Transmission [k][f ][ ][Set ID][ ][Data][Cr] [f ][c][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Data 00: Off 01: On...
  • Page 113 25. On timer (repeat mode/time) (Command: f d) 24. Off timer (repeat mode/time) (Command: f e) Configures the on time (repeat mode/time) settings. Configures the off time (repeat mode/time) settings. Transmission Transmission [f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1 1.
  • Page 114 26. On timer input (Command: f u) 28. Auto off (Command: f g) Adds a new schedule entry by selecting input for the current on Configures the automatic off settings. timer setting. Transmission Transmission [f ][g][ ][Set ID][ ][Data][Cr] [f ][u][ ][Set ID][ ][Data1][Cr] Data 00: Off (Will not turn off after 15 minutes) 01: On (Off after 15 minutes)
  • Page 115 30. Reset (Command: f k) 33. Time elapsed (Command: d l) Resets settings for Picture, Screen and Audio or restores factory Checks the elapsed time. settings. (Screen reset can only be performed in RGB input mode.) Transmission [d][l][ ][Set ID][ ][Data][Cr] Transmission Data FF: Read status...
  • Page 116 36. White balance red gain (Command: j m) 39. Backlight (Command: m g) Adjusts the white balance red gain value. Adjusts the back light brightness. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Back light brightness 0 to 100 Data 00 to FE: Red gain 0 to 254 Acknowledgement Acknowledgement...
  • Page 117 42. Tile Mode Check (Command: d z) 45. Tile V Position (Command: d f) To check Tile Mode status. To adjust the Tile Vertical position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][z][ ][Set ID][ ][Data][Cr] Transmission...
  • Page 118 48. Natural Mode (In Tile Mode) (Command : d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission [d][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]...

This manual is also suitable for:

55lv77d

Table of Contents