Beko WMB 91242LC User Manual
Hide thumbs
Also See for WMB 91242LC:
- Installation & operating instructions and washing guidance (40 pages) ,
- Installation & operating instructions manual (40 pages) ,
- User manual (48 pages)
Related Manuals for Beko WMB 91242LC
Summary of Contents for Beko WMB 91242LC
- Page 1 Washing Machine User Manual WMB 91242LC Document Number= 2820524353 / 15-10-15.(11:09)
- Page 2 This product was manufactured using the latest technology in environmentally friendly conditions.
-
Page 3: Important Instructions For Safety And Environment
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warran- 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children of less than 3 years... -
Page 4: Intended Use
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. • Place the product on a rigid, flat and level surface. • Do not place it on a long-pile rug or similar surfaces. • Do not place the product on a high platform or near the edge on a cascaded surfa- • Do not place the product on the power cable. • Never use sponge or scrub materials. These will damage the painted, chrome pla- ted and plastic surfaces. 1.2 Intended use • This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • The product must only be used for washing and rinsing of laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or trans- portation. 1.3 Children's safety • Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children. • Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product. • Do not forget to close the loading door when leaving the room where the product is located. -
Page 5: Disposing Of The Waste Product
1.5 Disposing of the waste product • This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environ- ment and natural resources by recycling used products. For children' s safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product. -
Page 6: Installation
2 Installation 2.3 Removing the transportation locks Refer to the nearest Authorised Service Agent for WaRNING: Do not remove the transportation installation of the product. To make the product ready locks before taking out the packaging for use, review the information in the user manual reinforcement. and make sure that the electricity, tap water supply WaRNING: and water drainage systems are appropriate before Remove the transportation safety... -
Page 7: Connecting To The Drain
WaRNING: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. WaRNING: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry. 1. Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) • To prevent flowing of dirty water back into the... -
Page 8: Sorting The Laundry
3 Preparation • The voltage specified in the "Technical specifications" section must be equal to your mains 3.1 Sorting the laundry voltage. • Sort laundry according to type of fabric, colour, and • Do not make connections via extension cables or degree of soiling and allowable water temperature. multi-plugs. • Always obey the instructions given on the garment tags. WaRNING: Damaged power cables must be replaced by the Authorized Service Agents. 3.2 Preparing laundry for washing Transportation of the product • Laundry items with metal attachments such as, 1. Unplug the product before transporting it. underwired bras, belt buckles or metal buttons will 2. Remove water drain and water supply connections. damage the machine. - Page 9 Detergent Drawer • Do not use detergent in excess of the amount recommended on the detergent package. The detergent drawer is composed of three compartments: 3.4 Initial use – (1) for prewash Before starting to use the product, make sure that – (2) for main wash all preparations are made in accordance with the – (3) for softener instructions in sections “Important safety instructions”...
- Page 10 • Use lesser detergent for small amounts or lightly Clothes soiled clothes. Colours Using softeners Pour the softener into the softener compartment of (Recommended temperature range based on soiling level: cold -40 °C) the detergent drawer. • Do not exceed the (>max<) level marking in the Powder and liquid detergents softener compartment. recommended for colours can be used at dosages recommended for heavily • If the softener has lost its fluidity, dilute it with soiled clothes. It is recommended to water before putting it in the detergent drawer. Heavily Soiled use powder detergents to clean clay Using liquid detergents and soil stains and the stains that are If the product contains a liquid detergent cup: sensitive to bleaches. Use detergents...
- Page 11 If the product does not contain a liquid detergent Using bleaches cup: • Select a programme with prewash and add the • Do not use liquid detergent for the prewash in a bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. programme with prewash. • Liquid detergent stains your clothes when used with As an alternative application, select a programme Delayed Start function. If you are going to use the with extra rinse and add the bleaching agent while Delayed Start function, do not use liquid detergent. the machine is taking water from the detergent Using gel and tablet detergent compartment during first rinsing step.
-
Page 12: Operating The Product
4 Operating the product 4.1 Control panel 1 - Spin Speed Adjustment button 2 - Display 3 - Temperature Adjustment button 4 - Programme Selection knob 5 - On / Off button 6 - Delayed Start buttons (+ / -) 7 - Auxiliary Function buttons 8 - Start / Pause / Cancel button 12 / EN Washing Machine / User’s Manual... - Page 13 4.2 Display symbols Select the desired programme with the Programme Selection button. Programmes are limited with the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. Always select the lowest required temperature. Higher temperature means higher power consumption. For further programme details, see "Programme and consumption table" 4.5 Main programmes Depending on the type of fabric, use the following main programmes. • Cottons a - Spin Speed indicator Use this programme for your cotton laundry (such b - Temperature indicator as bed sheets, duvet and pillowcase sets, towels, c - Spin symbol bathrobes, underwear, etc.). Your laundry will be d - Temperature symbol washed with vigorous washing action for a longer...
-
Page 14: Additional Programmes
4.6 additional programmes • Shirts Use this programme to wash the shirts made of cotton, For special cases, additional programmes are available synthetic and synthetic blended fabrics together. in the machine. • Jeans Additional programmes may differ according to Use this programme to wash clothes such as trousers, the model of the machine. jackets, vests, etc., made of denim. Lower mechanical movement in washing cycles and lower rpm in • Cottons Eco spinning cycles are used to prevent washing damages You may wash your normally soiled durable cotton on stoned jeans as well as to ensure a longer life. -
Page 15: Special Programmes
4.7 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin+Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed... -
Page 16: Programme And Consumption Table
4.10 Programme and consumption table Auxiliary functions Selectable Programme (°C) temperature range °C Cottons 2.70 1600 • • • • • 90-Cold Cottons 1.80 1600 • • • • • 90-Cold Cottons 1.00 1600 • • • • • 90-Cold Allergy 2.70 1600... -
Page 17: Auxiliary Function Selection
4.11 Auxiliary function selection • Rinse Hold If you are not going to unload your clothes immediately Select the desired auxiliary functions before starting after the programme completes, you may use rinse the programme. Furthermore, you may also select hold function to keep your laundry in the final rinsing or cancel auxiliary functions that are suitable to the water in order to prevent them from getting wrinkled running programme by pressing the Start / Pause / when there is no water in the machine. Press Start / Cancel button when the machine is operating. For this,... - Page 18 4.15 Loading door lock Changing the delayed start period If you want to change the time during countdown: There is a locking system on the loading door of the Press Start / Pause / Cancel button. “:” sign in the machine that prevents opening of the door in cases middle of the delayed start time on the display stops when the water level is unsuitable. flashing. Pause symbol appears. Delayed Start symbol Door Locked symbol appears when the loading door flashes. Start symbol disappears. Set the desired is locked. This symbol will flash until the loading door delayed start time by pressing the Delayed Start + or becomes ready to open when programme completes - buttons. Press Start / Pause / Cancel button. Delayed or the machine is paused. Do not force to open the Start symbol illuminates steadily. Pause symbol loading door in this step. Symbol disappears when the...
-
Page 19: Maintenance And Cleaning
5 Maintenance and cleaning To deactivate the Child Lock: Press and hold 2 and 4 Auxiliary Function buttons Service life of the product extends and frequently for 3 seconds. “COFF” appears on the display. faced problems decrease if cleaned at regular intervals. 5.1 Cleaning the detergent drawer Do not forget to disable the child lock at the end of the programme if it was enabled before. Clean the detergent drawer at regular intervals (every Otherwise, machine will not allow to select a new 4-5 washing cycles) as shown below in order to programme. prevent accumulation of powder detergent in time. 4.18 Cancelling the programme Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. "End"... -
Page 20: Cleaning The Body And Control Panel
4. Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand. Repeat Drum Cleaning process in every 2 months. 5.5 Draining remaining water and cleaning the pump filter Use an anti-limescale suitable for the washing machines. The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the After every washing make sure that no foreign pump impeller during discharge of washing water. - Page 21 a. Pull the emergency draining hose out from its seat b. Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the water in the machine completely. c. When draining of water is finished, close the end by the plug again and fix the hose in its place. d. Turn the pump filter to take it out. Discharging the water when the product does not have an emergency draining hose: a. Place a large container in front of the filter to catch...
-
Page 22: Technical Specifications
6 Technical specifications Supplier name or trademark Beko Model name WMB 91242 LC Rated capacity (kg) Maximum spin speed (rpm) 1200 Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Single Water inlet / Double Water inlet • / - •... -
Page 23: Troubleshooting
7 Troubleshooting Program does not start after closing the door. *Press the Start / Pause / Cancel button. • Start / Pause / Cancel button was not pressed.. >>> Programme cannot be started or selected. Press • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. This is not a failure; • Some water might have remained in the product due to the quality control processes in the production. >>> water is not harmful to the machine. Machine vibrates or makes noise. Adjust the feet to level the machine. - Page 24 www.beko.com...