Page 1
Model name: FOMA N600i No. Date Phone File name Reviewed by 1 2005 Nov. 18 Important Safety Information 1 Start-up 5 Basic Functions 12 Main Menu 17 Reference Information 41 Repair Guideline 42 Note: Some services/functions hereunder are not necessarily supported by all networks, such as 112, the international emergency call number.
TABLE OF CONTENTS i Important Safety Information 1 Start-up 5 N600i Overview ................5 Definitions of Buttons ..............6 Status Icons ................8 USIM Card and Battery ............10 Charging Method ..............11 Basic Functions 12 On/off ..................12 PIN and PUK Codes ..............12 PIN and PIN2 Codes ............12 PUK Code and PUK2 Code ..........12 Outgoing Call ................13 Number Keys ..............13...
Emergency service To mak se an emergency call in any country • Ensure that your N600i is switched on and in service. • Press the Send key to return to the Home screen if needed. • Press 112 (or 999 within the UK or 000 in Australia) followed by the Send key.
Page 4
• When the battery is thrown away, be sure it is non-conducting by applying vinyl tape to the (+) and (-) terminals. • Do not disassemble or modify the battery. • Do not solder the battery directly. • Stop using the battery if you detect any abnormalities, such as odour, discolouration or heat during use, charge or storage.
Page 5
Service The phone, batteries and charger contain no user-serviceable parts. We recommend that your NEC phone is serviced or repaired by an NEC authorised service centre. Please contact 3 or NEC for advice. Efficient us The phone has an internal antenna.
Page 6
The video/audio recordings you make/download are protected by copyright laws. They are for personal use only and must not be otherwise used without the permission of the copyright owner. Dispose of your used NEC product In the European Union EU-wide legislation as implemented in each...
1.2 DEFINITIONS OF BUTTONS Navigation keys (Up, Down, Left, Right) Left soft key (LSK) Right soft key (RSK) OK Key Send key (Off hook) Center soft key (CSK) Power key (On hook) 1.2 Definitions of Buttons...
Page 9
Left/RSK keys LSK key Idle mode: enter into the menu, hold it to decide whether to lock the N600i keyboard, press [LSK] and "*" key to unlock the keyboard Menu mode: Select menu or pop-up menu Editing mode: switch over the input methods RSK key Idle mode: enter into WAP browser Menu mode: back to the last page Editing mode: clear off text and characters...
STATUS ICONS SN Meaning Simple description Icon 1.Battery status Low power Power status 2.SMS status New short message Un-read short message 3.MMS status New MMS Unread MMS .WAP prompt WAP prompt 4.USIM card full USIM short message full MP full MP short message full USIM&...
1.4 USIM Card and Battery USIM card (user ID mode) incorporates MP number and service items, and can store phone numbers and personal data. Caution: Place USIM card beyond the reach of children. Caution: USIM card and the contact points are vulnerable to scratch or damage, please gently handle the USIM card. Caution: Place USIM card beyond the reach of static, dust or water.
2. BASIC FUNCTIONS 2. Basic Functions Caution: The N600i supports audio and video session in 3G network, and supports only audio session in GSM network. 2.12.1 On/off 2.1 On/Off Power on Press [Power] for 2-3 seconds to power on N600i while hearing the power-on tone and seeing power-on animation or text.
OUTGOING CALL Number Keys The max number can be inputed in the idle screen is 57 digits and user can’t change to another line manually. Input phone number in the idle screen with number keys, then press [send key], then dial the audio call to such number; dial video call to such number by pressing [OK].
BASIC FUNCTIONS > RECEIVE CALLS 2. Then press "send key" to dial the number, MP will automatically dial the extension number when connected with the telephone exchange. Emergency call Your service provider configures your MP with one or more than one emergency numbers (e.g. 112). In the service coverage area, the users can input the emergency number, and then press the send key to call emergency numbers even without the USIM card.
2. Select the number or numbers to be isolated (name or number); 3. Press "LSK key" to select "Split", then return to the session status; 4. You can then talk with the isolated party (maintain the session with other parties), then disconnect the number, then conduct multi-party session with the maintained parties (or hold on the isolated number, press "LSK key"...
SETTINGS Press [direction navigation key] to switch over the sub-menus, then press [OK] or relevant number key for confirmation. The default configuration of your MP will enable to use the functions immediately after inserting USIM card. For more needs and application modes, this MP allows you to define and change the setting for your habits to meet senior communication needs.
Page 18
Note: Meeting mode, Pocket mode, Car mode setting items is the same as Normal mode. 4. Power-saving Power-saving mode: Include two items, i.e. backlight setting, backlight timer. - Backlight setting: setting of backlight brightness, high, middle and low levels. - Backlight timer: setting of backlight duration. 5.
meanwhile you can delete the priority network from the list. 4. Acquisition order Provide the selection of network access orders, including WCDMA/GSM, GSM/WCDMA, WCDMA only and GSM only. 8. Reset settings Select the option, you can restore the MP settings to ex-work setting. 9.
Delete: delete the messages from receiving box. Delete all: delete all messages in the receiving box. - Outbox: store messages failing to be sent out. In the message list, press [LSK] pop-up menu for operations below: Read: examine the details of messages not sent out yet. Delete: delete selected messages from the sending box.
Page 21
[Save] - Store the message to " Drafts" list. [Send Option] -Configure Message Priority, Delivery Report, Deliver Time. In the "Create SMIL" editing interface, you can insert picture, tone and text.You can edit slide timing. Press [LSK] pop-up menu, Press [up and down navigation key] to switch over among the following options: [Remove]: remove picture, tone, or text, [Add Slide]: add new frame.
3. Select a SMIL in inbox or Userbox to display details, e.g. size and subject. Press [LSK] pop-up menu, select "Show" to play the details of the SMIL, including the text, picture and voice. 4. Settings Configure General Settings, MMS Settings, Reset Settings. - General Settings: configure Scrolling, Heading text, Signaure setting, Quote indicator.
9. Browsing mode: select display browser mode 0. Show all display: display all configured information. Reset: restore initial setting. About browser: display browser version. 8. Exit Exit the browser. Browse the web page Initiate WAP to browse web pages, the caption column in the window will display the title of the web page, the right/LSK keys in the screen will prompt the operations, the contents are displayed in the middle and the underlined text refers to the super linkage.
contacts stored in MP; - Group: select a group, search for all contact records of the group. 2. Add In the "new contact" window, first select the new records to be stored in USIM card/Phone, and then enter into new contact screen.
Quality: levels, 3 Normal, Fine, and Super fine. White balance: automatic, sunny, cloudy or indoors. Filtering: setting of the display style, i.e. Normal, Sepia and Monochrome. Shutter sound: No. 1, No. 2 and No. 3 tones (in conference mode, the tone will ring upon taking pictures or shooting) Brightness: 5 levels, i.e.
The clip stores the film clips; press [LSK] in the film list screen for options below: View: pre-view the film by pressing [OK] to suspend it and then press [OK] for pre-view. Send by MMS: send the film out in the form of SMIL. Rename: rename the film.
- Date<Creation time> (backward or forward) - Size (backward or forward) - Exc Time<Operating time> (backward or forward) - Exc Count<Operating count> (backward or forward) 8. Attribute In Java program list interface, press [LSK] for pop-up menu, select Attribute to review Java program information. 9.
3. Calculator 1. In "Accessory" list, press [direction navigation key] to scroll to "calculator", then press [OK] for confirmation, enter into the calculator screen for simple arithmetic. 2. You can directly input the numbers for calculation, press [direction navigation key] to switch over the calculation rules. 3.
4. Reference Information 5.Repair Guideline You are welcome to use the MP produced by NEC. In case of any problem of N600i MP in use, please contact the distributor or NEC repair center. In case of repair, please send your MP to local repair station (see the Warranty Certificate attached with MP); in case of no repair station locally, please send your MP and duplicate invoice to the distributor for EMS.