Specifications; Safety Warnings - Makita CG100D Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Maximum feed force
Feed speed
Stroke
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
300 ml (10 fl oz) size holder
(Holder A)
400 ml (14 fl oz) size holder
(Holder D)
600 ml (20 fl oz) size holder
(Holder B)
800 ml (29 fl oz) size holder
(Holder C)
300 ml (10 fl oz) size holder
(Holder A)
400 ml (14 fl oz) size holder
(Holder D)
600 ml (20 fl oz) size holder
(Holder B)
800 ml (29 fl oz) size holder
(Holder C)
5,000 N (1,100 lbs)
0 - 28 mm/s (0 - 66 inch/min)
D.C. 10.8 V - 12 V max
1.9 - 2.6 kg (4.2 - 5.7 lbs)
BL1016 / BL1021B / BL1041B
DC10SB / DC10WD / DC18RE
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2 ENGLISH
CG100D
214 mm (8-3/8")
214 mm (8-3/8")
350 mm (13-3/4")
294 mm (11-5/8")
404 mm (15-7/8")
402 mm (15-3/4")
538 mm (21-1/4")
480 mm (18-7/8")