Sanyo PJLink PLC-WXU30K Owner's Manual page 45

Sharpness
Press the Point button to decrease the sharpness of the
7
image; press the Point button to increase the sharpness
8
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to
7 8
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off .......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off .......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an "Image (1–4)" in the
Image Select Menu on page 43.
Quit
Exit the Image Adjust Menu.
Notes:
✔
• Noise reduction and Progressive cannot be selected
when 480p, 575p, 720p, 1035i, or 1080i is selected
(p.42).
• Reset and Store icons will be displayed when any
adjustment is made.
buttons to select one
ed
Video Input
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Store icon
A confirmation box
appears and then
select [Yes].
5