Download Print this page

DeWalt DCM571 Manual page 36

String trimmer / brush cutter
Hide thumbs Also See for DCM571:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 30
EngLIsh
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D
WALT battery packs only with designated
e
D
WALT chargers. Charging battery packs other
e
than the designated D
D
WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCM571 operates on a 54 volt battery pack.
These battery packs may be used: DCB546, DCB547. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 String trimmer
1 Auxiliary handle
4 Auxiliary handle screws
1 Strap
1 Guard
4 Guard screws
1 Brush cutter blade
1 Brush cutter nut
1 Brush cutter clamp washer
1 Brush cutter drive washer
34
WALT batteries with a
e
5 Cotter pins
1 Nut wrench
1 Rod, lock
1 Blade cover
1 Battery (not for DCM571N)
1 Charger (not for DCM571N)
1 Instruction manual
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Wear head protection.
Wear slip-resistant footwear.
Wear slip-resistant gloves.
Keep people and animals at least 15 m away
from the work area.
Do not use circular metal blades.
Beware of thrown objects.
Beware of blade thrust.

Advertisement

loading

This manual is also suitable for:

Dcm571n