Channel Search - Nokia MEDIAMASTER 9800 S Owner's Manual

FIRST TIME INSTALLATION

Channel Search

The Channel Search procedure can be performed in different
ways.
• If there are predefined channels, you can make an "Auto-
matic" or "Manual Search."
• If no predefined channel is available you can only perform a
"Manual Search."
Automatic Search
Start an Automatic Search on a selected satellite by pressing OK.
Manual Search
When you perform a Manual Search you first need to enter some
parameters for the channel search to work.
The information you need to enter in this menu is available in
magazines covering satellite TV reception, on the Internet or from
your Service Provider.
Transponder frequency: Specify the frequency in GHz. If you
enter the wrong figure(s), erase with the
Polarization: Select Horizontal, Vertical, Circular left or Circular
right.
Symbol rate (MSym/s): Enter with the numeric buttons. If you
enter the wrong figure(s), erase with the
FEC: Select "Auto" or any of the preprogrammed values.
Network Search: Select "Yes" if you want to search on all trans-
ponders connected to a specific network.
Press OK to start searching for channels.
GB 18
button.
button.