Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha MusicCast TSR-7810 Owner's Manual

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the
unit. Depending on the video/audio output jacks available on your video device, choose one of
the following connections. We recommend using an HDMI connection if the video device has
an HDMI output jack.
X
If the combination of video/audio input jacks available on the unit does not match your video device, change its
combination according to the output jacks of your device (p.30).
⬛
HDMI connection
Connect a video device to the unit with an HDMI cable.
The unit (rear)
HDMI 1 HDMI 2
HDCP2.2 HDCP2.2
WIRELESS
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
T HDCP2.2 HDCP2.2 HDCP2.2
(BD/DVD)
(BD/DVD)
ARC
ANTENNA
(RADIO)
FM AM
P Y P P
R B R
SPEAKERS
COMPONENT
VIDEO CLASS 2 WIRING CABLAGE
SURROUND CENTER
MONITOR OUT
VIDEO
T VIDEO VIDEO
SINGLE
1
2
ZONE 2 SUR. BACK SURROUND CENTER FRONT SUBWOOFER
O 1 AUDIO 2 AV 5 AV 6 ZONE OUT PRE OUT
If you select the input source by pressing HDMI 1-5, the video/audio played back on the video
device will be output from the unit.
Y
• To watch videos input to the HDMI 1-5 jacks, you need to connect your TV to the HDMI OUT jack of the unit
(p.28).
• If your video device supports HDCP 2.2, connect the device to the HDMI 1-3 jacks.
HDMI 1-5 jacks
HDMI 3 HDMI 4 HDMI 5
HDCP2.2
HDMI output
HDMI
Video device
⬛
Component video connection
Connect a video device to the unit with a component video cable and an audio cable (digital
optical or digital coaxial). Choose a set of input jacks (on the unit) depending on the audio
output jacks available on your video device.
Output jacks on video device
Video
Component video
AV 1-2 (COMPONENT VIDEO)
The unit
jacks
(rear)
P
Y P R
TRIGGER OUT B
12V 0.1A
HDMI 1 HDMI 2 H
HDMI OUT
HDCP2.2 HDCP2.2 H
HDCP2.2
IN
2 1
(BD/DVD)
ARC
OUT
REMOTE
ANTENNA
OPTICAL VIDEO
(RADIO)
COMPONENT VIDEO FM AM
(TV)
AV4
COAXIAL
AV3
Y P P Y P P
B R B R
CO
AV2
MONITO
OPTICAL
V
AV 1
COMPONENT VIDEO VIDEO
SING
GND
AV2 ZONE 2 SUR. B
PHONO AUDIO 1 AUDIO 2
AV 5 AV 6 ZONE OUT
OPTICAL
AV 1
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
If you select the input source by pressing AV 1-2, the video/audio played back on the video
device will be output from the unit.
Y
The component video signals (other than 480i/576i signals) input to AV 1-2 jacks of the unit can be output from
the MONITOR OUT (COMPONENT VIDEO) jacks only. To watch those videos, you need to connect your TV to the
MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.29). For details, refer to "Video signal flow" (p.141).
30
En
Input jacks on the unit
Audio
Digital optical AV 1 (COMPONENT VIDEO + OPTICAL)
Digital coaxial AV 2 (COMPONENT VIDEO + COAXIAL)
Video output
(component video)
COMPONENT
VIDEO
P
R
P
B
Y
Video device
COAXIAL
OPTICAL
Audio output
(digital optical or digital coaxial)