Adjusting The Anti-Scalp Rollers - Toro 74960 Operator's Manual

Figure 26
1. Deck-lift pedal
2. Height-of-cut pin
Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, it is
recommended to adjust the height of the anti-scalp
rollers.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Adjust the anti-scalp rollers as shown in
27, Figure 28, and
3. Transport lock
-
EUTRAL LOCK
Figure
Figure 29.
1. Anti-scalp roller
2. Spacer
3. Bushing
g027343
1. Anti-scalp roller
2. Bushing
1. Anti-scalp roller
2. Spacer
3. Bushing
30
Figure 27
4. Flange nut
5. Bolt
Figure 28
3. Flange nut
4. Bolt
Figure 29
4. Flange nut
5. Bolt
g000942
g000943
g000944