APPLYING THE SEALS
•
Turn the cooktop upside down.
•
Spread the longer seal "A" around the left, rear and right sides as shown in figure 4.4a.
•
With a cutter or a scissors cut the excess seal "C" and retain it for next use (figure 4.4b).
•
Spread the seal "B" around the left, front and right edges of the cooktop as shown in
figure 4.4c.
•
Spread the seal "C" along the rear edge of the cooktop as shown in figure 4.4d. Make
sure that the beginning and the end overlap at the seal "B" (see figure 4.4e).
Fig. 4.4a
seal A
seal B
Fig. 4.4b
seal C
seal C
seal A
Fig. 4.4c
seal B
Fig. 4.4e
seal C
Fig. 4.4d
15