Mouse Functions; Connecting The Power Source - Fujitsu LPF-7200E User Manual

Mouse Functions

By connecting the PC mouse terminal and projector mouse terminal, the projector remote control unit can be used instead of the PC
mouse.
Connecting the Mouse
MOUSE
WIRED
PS-232C REMOTE USB PS/2
To MOUSE PS/2
To MOUSE
terminal
USB terminal
USB mouse
connection
cable (optional)
PS/2 mouse
connection cable
(supplied)
Mouse Functions
Important
• Set the slide switch on the remote control unit to MOUSE. If the switch is set on PJ (projector), the following operations
cannot be performed.
Slide switch
Mouse pointer
buttons

Connecting the Power Source

1
Plug the power cable (supplied) into the power terminal on the left side of
the projector.
2
Insert the power plug into the power socket.
The POWER-ON monitor lights red and the projector is in standby status.
En-20
[Projector right side]
To mouse (PS/2)
terminal
To mouse (USB)
terminal
POWER MUTE
LASER
RGB VIDEO
MOUSE
PJ
L-MOUSE button
MENU ENTER/R-MOUSE
R-MOUSE button
ZOOM-PAN SOURCE VOLUME
CANCEL
AUTO STATUS
ZOOM FOCUS KEYSTONE
Connecting to AT interchangeable equipment
Connect a PS/2 mouse or USB mouse. (The PS/2 mouse
cable is supplied, but the USB mouse cable is optional.)
Connecting to a Macintosh PC
Connect a USB mouse or ADB mouse. (Both the USB mouse
cable and Mac mouse cable for the ADB mouse are op
tional.)
Note
• When connecting the ADB mouse, use the optional Mac
mouse cable instead of the PS/2 mouse cable.
R-MOUSE button
The R-MOUSE button on the right of the remote control unit
corresponds to the right button on a mouse with two click
buttons.
L-MOUSE button
The L-MOUSE button in the center of the remote control
unit corresponds to the left button on a mouse with two click
buttons.
Moving the Cursor
When the left, right, up, down and diagonal mouse pointer
buttons are pressed, the cursor moves in the designated
direction on the screen.
Select and Decide
Move the cursor and press the L-MOUSE button.
Drag
While pressing the L-MOUSE button, press the mouse
pointer buttons in the desired drag direction.