Advertisement
INTRODUCTION
The Tempus Air PR is a pump relay that allows to control the openings and closings of a 16A relay in dry contact
from a Tempus Air CT/MV controller.
Warning: this control relay only works with a Tempus Air CT / MV. Do not connect other controllers to this relay.
SPECIFICATION
DIMENSIONS
Width : 10,8 cm
Height : 10,8 cm
Depth : 5,2 cm
FEATURES
The Tempus Air PR has 1 relay which can only be
controlled by a 9V command (pulse).
Tempus Air PR is a 230 VAC 16A relay.
Maximum controlled power: 3600W
INSTALLATION
Installation must be performed by qualified personnel in accordance with local regulations.
Example of basic installation
With an irrigation start command,
the relay contact closes.
With a stop irrigation command,
the relay contact opens.
INSTALLATION
An irrigation command from the Tempus Air CT/MV operates
the CLOSING of the Tempus Air PR.
Example: start a pump
An irrigation command from the Tempus Air CT/MV operates
the OPENING of the Tempus Air PR.
Example: stop a pump
Environmental conditions use:
- Maximum altitude use : 2000m
- Indoor or outdoor (sheltered) installation
- Maximum temperature use : 50°C
- Relative humidity : 90%
Neutral
Phase
C: Common
P: 9V pulse irrigation
control
Toro Tempus Air PR
Phase OUT
Phase IN
2
Advertisement
