Page 3
1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally. Hold LCD by the side carefully and DON’T touch or press panel directly. ...
2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) spacer screwdriver C/D disassembly tool Gloves or soft cloth ...
Page 5
3. Disassembly SOP Push the button to remove the stand-base assy. Unscrew the screw*4pcs Tool: Screwdriver #2 Use disassembly tool to open all the latches along the edge of the Rear Cover. Disconnect the pin and take off the Mylar and the tapes.
Page 6
Take off the tape and disconnect the pin. Unscrew the screw*4 pcs to remove the main frame. Tool: Screwdriver #2 Tear off tape and disconnect the connector Remove the screw*15 pcs to separate the panel and the middle frame. Tool: Screwdriver #2 Remove the mylar...
Page 7
Remove the screw*8pcs Tool: Screwdriver #2 Disconnect the pins Separate the panel and the middle frame...
Page 8
The panel The middle frame Disconnect the pins to remove the key board and the LED board The rear cover...