Fujitsu Halcyon AGU9RLF Operating Manual page 15

CLEANING AND CARE
Air Cleaning Filter Installation
1. Open the Intake Grille and remove the Air
lter.
2. Install the Air cleaning lter set (set of 2).
Set the air cleaning lter into the panel.
Catch it on 5 places of picks.
(3 places of upper parts and lower part 2 places.)
3. Install the Air lter and close the Intake
Grille.
● When air cleaning lters are used, the effect will increased
by setting the fan speed to "High".
Replacing dirty Air cleaning lters
Replace lters with the following components (purchased sep-
arately).
● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FC03-2
● Negative air ions deodorizing lter: UTR-FC03-3
1. Open the Intake Grille and remove the Air
lter.
9378532076_OM.indb 15
2. Replace them by 2 new Air cleaning
3. Install the Air lter and close the Intake
POLYPHENOL CATECHIN AIR CLEANING FILTER (1 sheet)
● The Air Cleaning Filters are disposable lters. (They can not
● For storage of the Air Cleaning Filters, use the filters as
● Generally, the filters should be exchanged about every
[Negative air ions deodorizing lter (1 sheet) — light blue]
● The lters should be exchanged about every 3 years so as
Air cleaning lter
In order to maintain the deodorizing effect, please clean the
Can be used if set correctly during installation.
Please consult authorized serviceman when using
this function.
● It lights on when it is time to clean the air lters.
lters.
1 Remove the old air cleaning lters in reverse order of
their installation.
2 Install in the same way as for installation of the air
cleaning lter set.
Grille.
In regard to the Air Cleaning Filters
be washed and reused.)
soon as possible after the package has been opened.
(The air cleaning effect decreases when the lters are left in
the opened package)
3 months.
Please buy delicated air cleaning lters (UTR-FC03-2) (Sold
separately) to exchange the used dirty air cleaning lters.
to maintain the deodorizing effect.
Please buy delicated deodorizing lter (UTR-FC03-3) (Sold
separately) when exchanging the lters.
Maintenance of Deodorizing Filters
lter in the follow way once 3 months.
1 Remove the deodorizing lter.
2 Clean with water and dry in the air.
1) Flush the lters with high-pressure hot water until the
surface of the lters are covered with water. Please
ush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.
2) Rinse with water ow.
3) Dry in shade.
3 Reinstall the deodorizing lter.
Filter Indicator Reset (The special setting)
Clean the lter referring to "CLEANING AND CARE".
After cleaning, press the MANUAL AUTO button (Fig.2 3 )
for 2 seconds or less on the indoor unit.
Indicator Lamp
TIMER OPERATION ECONOMY
: Flashing : OFF
En-15
9/24/2013 4:35:28 PM