Noise Cancelling (27E1N5600He); Remove The Base Assembly For Vesa Mounting - Philips 27E1N5600HE User Manual

2.4 Noise Cancelling
(27E1N5600HE)
This monitor has Noise Cancelling
functionality. When connected via
USB-C during video conferencing, the
monitor will automatically filter for
human sounds. This function can be
turned off in the OSD menu, under Noise
Cancelling (default=ON).

 

 
 





Note
If multiple devices are connected to
the display, both may play through
the speaker at the same time. It is
recommended to disable the audio
output of the non-primary device.


14
2.5 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then
lift the monitor stand.
27E1N5600AE
27E1N5600HE
2. While keeping the release button
pressed, tilt the base and slide it out.
27E1N5600AE
27E1N5600HE