Electrolux EVDP1490 Manual page 11

6.5 Additional functions
"External vacuum"
It is to be used to eliminate the air inside
special air-tight containers (not supplied
with this appliance).
• For the external vacuum, tighten the
fitting 9 provided, inside the tank.
• Connect the container pipe to the fitting
9 .
• Set the maximum vacuum level
disable the sealing
• With the appliance cover open press the
button to start the packaging cycle.
This button will start to flash.
• The button stops flashing at the end of
this cycle.
9
and
.
"Reconditioning cycle"
This function is used in the following
situations:
• Before using the appliance for the first
time.
• After extensive downtime.
• After having sealed products with high
humidity content (e.g. soups).
• When you notice a decrease in
appliance performance (e.g. more time
to vacuum or it does not vacuum at all).
This program lasts about 15 minutes and
guarantees the complete cleaning of the
pump, removing any liquid emulsion that
might be found in the oil.
Do not seal any product while this
program is running.
Proceed as follows:
• Hold down the
buttons flash.
• Close the cover with light pressure.
• Press the button. The
buttons flash while the program runs.
• At the end of the cycle (15 minutes)
the button will stop flashing and the
appliance will be ready for use.
ENGLISH 11
button until all the
and