Table of Contents
Advertisement
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
9. BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in
the compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.
10. DAILY USE
10.1 Activating the appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
3. Press button Aan/Uit to activate the
appliance.
A short tune sounds.
10.2 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.
To drain the water refer to
'At the end of the
programme'.
8.8 Temp.°C
Set this option to change the default
temperature.
Indicator
The display shows the set temperature.
.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
ENGLISH
= cold water.
15
Advertisement
Table of Contents
