1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. LED TV
  5. 58L9300UC
  6. User manual

Toshiba 58L9300UC User Manual

Integrated high definition led television
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Integrated High Definition LED
Television User's Guide:
58L9300UC / 65L9300UC / 84L9300UC
If you need assistance:
Toshiba's Support Web site
For more information, see
Owner's Record
The model number and serial number are on the back and side of your television.
Record these numbers, whenever you communicate with your Toshiba dealer about
this Television.
Model name:
Serial number:
Register your Toshiba Television at register.toshiba.com
Note: To display a High Definition
picture, the TV must be receiving a
High Definition signal (such as an over-
the-air High Definition TV broadcast, a
High Definition digital cable program,
or a High Definition digital satellite
program). For details, contact your TV
antenna installer, cable provider, or
satellite provider.
support.toshiba.com
"Troubleshooting" on page 171
Get other manuals https://www.bkmanuals.com
in this guide.

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 58L9300UC

Summary of Contents for Toshiba 58L9300UC

  • Page 1 “Troubleshooting” on page 171 in this guide. Owner's Record The model number and serial number are on the back and side of your television. Record these numbers, whenever you communicate with your Toshiba dealer about this Television. Model name: Serial number: Register your Toshiba Television at register.toshiba.com...
  • Page 2 CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS TOSHIBA CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
  • Page 3 Dear Customer, NOTE TO CATV INSTALLERS Thank you for purchasing this Toshiba LED TV. This is a reminder to call the CATV system installer’s This document will help you use the many exciting attention to Article 820-40 of the U.S. NEC, which features of your new LED TV.
  • Page 4 22) Never modify this equipment. Changes or Additional Safety Precautions modifications may void: a) the warranty, and b) the user’s authority to operate this equipment 14a) CAUTION: If the TV is dropped and the cabinet under the rules of the Federal Communications or enclosure surface has been damaged or the Commission.
  • Page 5 If these sounds become frequent or continuous, component connected to an antenna or phone unplug the power cord and contact a Toshiba system. Authorized Service Provider. Get other manuals https://www.bkmanuals.com...
  • Page 6 CAUTION: Do not use the screws removed from serious injury. Refer all servicing not specified the back cover to attach the wall mount bracket to in this manual to a Toshiba Authorized Service the TV. Provider. 4) Always use the screws supplied or recommended 46) If you have the TV serviced: by the wall mount manufacturer.
  • Page 7 1) This process will require 4 or more people. If swallowed, consult a doctor immediately. Toshiba recommends using 5 people for this • Do not repair, modify, or disassemble the 3D process. Two people on each side of the TV and glasses by yourself.
  • Page 8 • Avoid using the 3D function when under the • For 58L9300UC Series: Use the 3D glasses in influence of alcohol. the following viewing angle. • If you are ill or feel ill, you should refrain from Otherwise, you may not see the correct 3D image.
  • Page 9 Note: This equipment has been tested and found capability/functionality/settings. to comply with the limits for a Class B digital device, • (For 58L9300UC Series) If you use any device, pursuant to Part 15 of the FCC Rules. These limits such as a mobile phone or mobile wireless...
  • Page 10 Caution: Changes or modifications to this equipment FCC Radiation Exposure Statement: not expressly approved by Toshiba could void the This equipment complies with FCC radiation exposure user's authority to operate this equipment. limits set forth for an uncontrolled environment. This...
  • Page 11 • Designed with UEI Technology™. Under License the prior written permission of Toshiba. No patent liability from Universal Electronics Inc. is assumed, however, with respect to the use of the Portions ©...

  • Page 12: Table Of Contents

    Contents Chapter 1: Introduction ...........20 Safety icons ............... 20 Features ..............21 Overview of installation, setup, and use ....22 TV front and side panel controls and connections ..24 Front panel ............24 Left side ............... 25 TV back panel controls and connections ....26 Back panel controls ..........
  • Page 13 Contents About the connection illustrations ....... 32 Connecting an antenna, satellite receiver, and/or cable TV box ............32 ® Connecting DVD to ColorStream or VCR to composite video ..........34 Connecting remote IR devices ........35 Using the IR blaster OUT terminal ....... 35 Connecting a digital audio system ......
  • Page 14 Contents Chapter 4: Initial Setup and Menu ........55 Initial setup ............... 55 Performing the initial setup ......... 56 Navigating the menu system ....... 65 Quick Menu ............66 Chapter 5: Setting up your TV .........67 How to navigate the menu ......... 67 Changing initial settings ........
  • Page 15 Contents Entering a new PIN code ........89 Changing or deleting your PIN code ....89 Forgotten PIN code ..........90 Locking specific channels ......... 90 Locking video inputs ........... 90 Setting a time limit for games ......91 Locking the control panel ........91 ™...
  • Page 16 Contents ® DynaLight ............110 ® ClearScan ............111 MPEG NR ............112 DNR ..............112 Ambient Light Sensor ........112 ColorMaster™ ............ 113 Base Color Adjustment ........113 Color temperature ..........113 Fine Texture Restoration ........114 Brilliance Restoration ........114 3D Judder Cancellation ........
  • Page 17 Contents Chapter 8: Advanced features ........123 Using your home network ........123 When using a Wireless network connection ..124 Setting up the Network ..........125 Wireless Setup ..........125 Advanced Network Setup ........130 Network Connection Test ........132 Using the software keyboard ........
  • Page 18 Contents Chapter 10: Troubleshooting ...........171 General troubleshooting .......... 171 Picture problems ............. 172 Sound problems ............174 Remote control problems ........174 Channel tuning problems ........174 Closed caption problems ......... 175 ™ HDMI CEC Control operation ......... 175 ™ HDMI problems .............
  • Page 19 Contents Operating conditions ..........183 Supplied accessories ..........183 ™ Acceptable signal formats for PC IN, and HDMI and 3D .............. 184 PC IN signal formats .......... 184 ™ HDMI signal formats ........185 3D Signal formats* ..........186 4K Video Support formats ......... 186 Operating the TV with combination buttons ....

  • Page 20: Chapter 1: Introduction

    Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 21: Features

    Introduction Features Features Integrated digital tuning (8VSB ATSC and QAM) — ❖ Eliminates the need for a separate digital converter set-top box (in most cases). 3840 x 2160 display resolution. ❖ Quad FHD— Allows you to enjoy high quality full HD pictures ❖...

  • Page 22: Overview Of Installation, Setup, And Use

    Introduction Overview of installation, setup, and use ColorMaster™—Technology allows you to adjust the TV’s ❖ standard colors, see “ColorMaster™” on page 113. ® ClearScan —Technology uses both frame interpolation technology ❖ and advanced backlight control with image synchronization to quadruple the TV refresh rate for an even clearer fast motion video. ®...
  • Page 23 ❖ allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY. Do not plug in any power cords until after you have connected all cables and devices to your TV.

  • Page 24: Tv Front And Side Panel Controls And Connections

    “Ambient Light Sensor” on page 112. Remote Sensor—Point the remote control toward this remote sensor, see “Remote control effective range” on page 3D IR—This sensor detects the 3D IR (for 58L9300UC model only). Get other manuals https://www.bkmanuals.com...

  • Page 25: Left Side

    Introduction TV front and side panel controls and connections Left side Analog Video Port—Analog Video input. Connect using a commercially available conversion cable. ™ 3 HDMI Ports—High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an ™ HDMI device or uncompressed digital video from a DVI device.

  • Page 26: Tv Back Panel Controls And Connections

    Introduction TV back panel controls and connections TV back panel controls and connections 58” FOR SERVICE USE ONLY POWER button Volume up Volume down Switches the function of VOL+/- buttons to select volume, channel, or input mode. PC / HDMI ™ Audio IN Antenna / Cable PC IN PC/HDMI 2...

  • Page 27: Back Panel Controls

    Introduction TV back panel controls and connections 84” FOR SERVICE USE ONLY POWER button Volume up Volume down Switches the function of VOL+/- buttons to select volume, channel, or input mode. PC / HDMI ™ Audio IN Antenna / Cable PC IN PC/HDMI 2 AUDIO...

  • Page 28: Back Panel Connections

    Introduction TV back panel controls and connections each time the button is pressed: → Channel → Input → Volume → Back panel connections LAN IN—Connects the TV to your home network. ™ HDMI IN—High-Definition Multimedia Interface input receives ™ digital audio and uncompressed digital video from an HDMI ™...

  • Page 29: Chapter 2: Connecting Your Tv

    Chapter 2 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.

  • Page 30: Component Video Cables (Red/Green/Blue)

    Component video cables come in sets of three and are for use with video ® devices with component video output. (ColorStream is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

  • Page 31: Optical Audio Cable

    Connecting Your TV Overview of cable types Optical audio cable (Sample Illustration) Optical audio cable ® Optical audio cable connects receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on page Analog RGB (15-pin) computer cable (Sample Illustration) Analog RGB (15-pin) computer cable Analog RGB (15-pin) computer cable connects a computer to the TV’s...

  • Page 32: Lan Cable

    Connecting Your TV Connecting an antenna, satellite receiver, and cable TV box LAN cable (Sample Illustration) LAN cable Standard LAN cable connects the TV to your home network, see “Connecting the TV to a home network with an Internet connection - wired”...
  • Page 33 Connecting Your TV Connecting an antenna, satellite receiver, and cable TV box Items needed: Coaxial cables ❖ Standard AV cables ❖ Component video cables (red/green/blue) ❖ NOTE When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV.

  • Page 34: Connecting Dvd To Colorstream ® Or Vcr To Composite Video

    Connecting Your TV ® Connecting DVD to ColorStream or VCR to composite video ® Connecting DVD to ColorStream or VCR to composite video Standard A/V cable Yellow White Red Green Blue TV back panel VIDEO AUDIO AUDIO L / MONO P VIDEO DVD player AUDIO OUT...

  • Page 35: Connecting Remote Ir Devices

    Connecting Your TV ® Connecting DVD to ColorStream or VCR to composite videos To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the DVD player: ® Turn ON the DVD player. Select the ColorStream HD video input source on the TV.* To view satellite programs using the component video connections:...
  • Page 36 Connecting Your TV Connecting remote IR devices To connect the IR blaster cable: Locate the infrared sensor on the front of your device. This sensor is marked on some devices. If you are having issues locating the device's infrared sensor, see “If you cannot locate the device’s infrared sensor:”...
  • Page 37 Connecting Your TV Connecting remote IR devices To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see “Setting the IR Blaster”...

  • Page 38: Connecting A Digital Audio System

    Connecting Your TV Connecting a digital audio system Connecting a digital audio system ® The TV’s Digital Audio Out terminal outputs a Dolby Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for using ® with an external Dolby Digital decoder or other external audio systems with optical audio input.

  • Page 39: Connecting An Hdmi™ Or Dvi Device To The Hdmi™ Input

    Connecting Your TV Connecting an HDMI™ or DVI device to the HDMI™ input ™ ™ Connecting an HDMI or DVI device to the HDMI input ™ The HDMI input on your TV receives digital audio and uncompressed ™ digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
  • Page 40 Connecting Your TV ™ ™ Connecting an HDMI or DVI device to the HDMI input TV back panel HDMI IN HDMI device (satellite or cable box, media player, etc) HDMI OUT HDMI cable DVI device HDMI -to-DVI adapter cable DVI/HDCP Analog audio cable PC/HDMI 2 AUDIO...

  • Page 41: Using The Tv Remote And Hdmi ™ Cec Control To

    Configure the connected devices. See each device’s operation ❖ manual. NOTE This feature is limited to models incorporating Toshiba’s HDMI™ CEC Control feature. However, Toshiba is not liable for those operations. See the individual instruction manuals for compatibility information. Get other manuals https://www.bkmanuals.com...

  • Page 42: Connecting An Hdmi ™ Audio System

    Connecting Your TV ™ Connecting an HDMI audio system When using an external AV amplifier the picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV amplifier. NOTE The control range of the delay time differs according to the device you use. ™...

  • Page 43: Connecting A Computer

    Connecting Your TV Connecting a computer Connecting a computer ™ With either the PC IN or HDMI connection, you can view your computer’s display on the TV and hear the sound from the TV’s speakers. Connecting a computer to the TV’s PC IN terminal When connecting a computer to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.

  • Page 44: Connect A Computer To The Tv's Hdmi

    Connecting Your TV Connecting a computer If the computer has a compatible mini D-sub15-pin terminal, an ❖ adapter is not required. Depending on the content’s title and the computer’s specifications, ❖ some scenes may be skipped or you may not be able to pause during multi-angle scenes.

  • Page 45: Connecting To A Home Network

    (i.e. no overscanning). Connecting to a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this home network to access photos, movies, and music files that are stored on a connected media server and play them on your TV.

  • Page 46: Connecting The Tv To A Home Network Without An Internet Connection

    Connecting Your TV Connecting to a home network Connecting the TV to a home network without an Internet connection Items needed: Standard LAN cables ❖ Router with a hub ❖ Router with a hub Computer TV back panel Computer (Sample Illustration) L9300UC Series—Connecting a network without Internet connection Get other manuals https://www.bkmanuals.com...

  • Page 47: Connecting The Tv To A Home Network With An Internet Connection - Wired

    Connecting Your TV Connecting to a home network Connecting the TV to a home network with an Internet connection - wired Items needed: Coaxial or telephone cable (depending on your modem type) ❖ Standard LAN cables ❖ Router with Hub ❖...

  • Page 48: Connecting The Tv To A Home Network With An Internet Connection - Wireless

    Connecting Your TV Connecting to a home network Connecting the TV to a home network with an Internet connection - wireless Items needed: Coaxial or telephone cable (depending on your modem type) ❖ Standard LAN cables ❖ Wireless LAN access point or wireless router ❖...

  • Page 49: Connecting The Ac Cord On Your Tv (For 84L9300Uc Series)

    Connecting Your TV Connecting to a home network NOTE The Built-in WLAN Adapter is based on the IEEE 802.11n specification and may not be fully compatible with, or support some features (e.g., security) of certain Wi-Fi equipment that are based on the draft version of IEEE 802.11n.

  • Page 50: Chapter 3: Using The Remote Control

    Chapter 3 Using the Remote Control Controlling other devices The TV’s remote control can operate other devices as described in “Setting the IR Blaster” on page Installing batteries To install batteries: Slide back and pull up to open the cover. (Sample Illustration) Removing the battery cover Get other manuals https://www.bkmanuals.com...
  • Page 51 Using the Remote Control Installing batteries Install two AAA size batteries. NOTE Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing the batteries Slide on the cover. Do not expose batteries to excessive heat such as sunshine, fire, etc. NOTE Dispose of batteries in a designated disposal area.

  • Page 52: Remote Control Effective Range

    Using the Remote Control Remote control effective range Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. 58” 65” 16.4 ft (5m) 16.4 ft (5m) 84”...

  • Page 53: Learning About The Remote Control

    Using the Remote Control Learning about the remote control Learning about the remote control Only the buttons used to operate the TV are described in this section. ™ For the HDMI CEC Control functions, see “Using HDMI™ CEC Control” on page (Sample Illustration) Remote control overview Get other manuals https://www.bkmanuals.com...
  • Page 54 Using the Remote Control Learning about the remote control NOTE The error message “Not Available” may appear if you press a button for a function that is not available. Item: Description: Function: Item: Description: Function: POWER button Turns the TV On and Off. When QUICK button Launches the Quick menu.

  • Page 55: Chapter 4: Initial Setup And Menu

    Chapter 4 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Menu Language screen appears. NOTE You can stop initial setup by pressing the EXIT button. However, if you do not finish Channel Tuning setting, the Quick Setup screen will appear every time you turn on your TV.

  • Page 56: Performing The Initial Setup

    The finished items are dark, and the finish mark ( ) appears by them. The setup window shows the settings. Progress window Setup window Quick Setup Country Welcome Country Thank you for choosing Toshiba TV Time Zone Store/Home Mode U.S. Network Canada Smart TV Mexico Channel Tuning IR Blaster...
  • Page 57 Initial Setup and Menu Performing the initial setup Basic Operations in Quick Setup Use the the p / q (arrow) buttons to select an item on the setup window, and press the OK button. Select Next and press the OK button. The next item will appear.
  • Page 58 Initial Setup and Menu Performing the initial setup Performing the Quick Setup Country S elect a country then press the OK button. Time Zone Select Time Zone, and select a time zone from the submenu. Select Daylight Saving Time, and select On or Off from the submenu.
  • Page 59 Initial Setup and Menu Performing the initial setup NOTE Easy Setup. If your Access Point (AP) supports WPS, this method can be used. WPS is a standard designed to simplify the connection of wireless LAN equipment and the setup of network security features. Assisted Setup (setup using the AP's notification information).
  • Page 60 Initial Setup and Menu Performing the initial setup Select Media Renderer, and select On or Off from the sub menu. When On is selected, the Media Renderer function can be used. Select Next. Channel Tuning Select Antenna or Cable, and select Start Scan. Auto Tuning will start.
  • Page 61 Initial Setup and Menu Performing the initial setup If some channels are not found after scanning: Check the antenna/cable connections, and scan again. Connect the TV to the antenna or cable box directly and scan again. Press the SETUP button. Select Installation > Quick Setup and press the OK button.
  • Page 62 Initial Setup and Menu Performing the initial setup CD Player Video Accessory Press the q button then press the GREEN button. The Brand screen will appear. Use the p / q (arrow) buttons to select the brand name then press the OK button. Select a field and press the OK button to show the software keyboard.
  • Page 63 Initial Setup and Menu Performing the initial setup Press the OK button. Input & Mode Key screen will appear. Input & Mode Key Use the t / u (arrow) buttons to select the TV input to which the IR device is connected. --- (Appears when Device Type is set to Receiver, Misc Audio or Amplifier) ANT/CABLE...
  • Page 64 Initial Setup and Menu Performing the initial setup Volume Control Use the t / u (arrow) buttons to set up the Volume control to select: TV (this is the default) External The Volume + or – and MUTE buttons will control the External equipment through the IR blaster.

  • Page 65: Navigating The Menu System

    Initial Setup and Menu Navigating the menu system Navigating the menu system To open the menu system, press the SETUP button on the remote control. < Picture Picture Picture Mode Standard Reset Sound Backlight Options Contrast Brightness Installation Color Tint Network Sharpness Advanced Picture Settings...

  • Page 66: Quick Menu

    Initial Setup and Menu Quick Menu Quick Menu Quick menu helps you access some options more quickly. Press the QUICK button to display the Quick menu and press the p / q (arrow) buttons to select an option. NOTE Quick menu items differ depending on the current mode. Quick Menu Item Page ®...

  • Page 67: Chapter 5: Setting Up Your Tv

    Chapter 5 Setting up your TV How to navigate the menu Press the SETUP button. Select Installation, Main menu, ❖ Submenu, and then press the OK or EXIT button. Changing initial settings From Quick Setup: Press the SETUP button. Select Installation > Quick Setup, and press the OK button. A confirmation message appears.
  • Page 68 Setting up your TV Individual settings Country You can select the country in which you reside. Press the SETUP button. Select Installation > Country and press the OK button. Press the p / q (arrow) buttons to select the country. Press the OK button.

  • Page 69: Storing Channels In Memory (Optional)

    Setting up your TV Storing channels in memory (optional) Press the p / q (arrow) buttons to select Antenna or Cable. Press the OK button. Select Start Scan. After scanning is complete, the auto tuning results screen will appear. Press the OK or EXIT button. Storing channels in memory (optional) To make sure your TV stops only on the channels you want when you press the CH p / q buttons on the remote control or the control panel, store...

  • Page 70: Skipping Channels

    Setting up your TV Skipping channels Manual Tuning After storing channels in memory, you can manually enter channels if the channel number is known. Press the SETUP button. Select Installation > Channel Tuning > Manual Tuning, and then press the OK button. Use buttons 0–9 on the remote control to enter the channel number (for example, 56).

  • Page 71: Skipping Video Inputs

    Setting up your TV Skipping video inputs NOTE You cannot tune skipped channels using the CH buttons. Use buttons 0–9 and the DASH button on the remote control. Skipping video inputs You can set video inputs to be skipped when selecting inputs in the Input selection screen.

  • Page 72: Labeling Video Inputs

    Setting up your TV Labeling video inputs Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inputs according to the devices you have connected to the Press the SETUP button. Select Options >...

  • Page 73: Chapter 6: Basic Features

    ™ 3D capable HDMI cable. ❖ If you wish to obtain extra 3D glasses: Toshiba provides 3D glasses for this television as an option. To obtain them visit: US: http://ceaccessories.toshiba.com/ Canada: http://www.shoptoshiba.ca/ NOTE Use the type of 3D glasses that are compatible with to your TV.
  • Page 74 Basic features Using 3D functions Health precautions: Due to the possible impact on vision development, viewers of 3D ❖ programming should be age 6 or above. Children may be more susceptible to health effects from viewing 3D images and should be closely supervised.

  • Page 75: Viewing 3D Images

    Basic features Using 3D functions NOTE Watching the TV: Proper 3D effects or 3D-to-2D conversion results may not be obtained ❖ depending on the received 3D content. 3D effect and image quality may vary depending upon content quality ❖ and display device capability/ functionality/settings. Wear the 3D glasses properly, otherwise you may not see the correct ❖...
  • Page 76 Basic features Using 3D functions When viewing 3D images, wear the 3D glasses. ❖ The 2D to 3D conversion function is activated and controlled by you ❖ according to your personal preferences. The 2D to 3D conversion function is meant for enjoyment of 2D home ❖...
  • Page 77 Basic features Using 3D functions The 3D button operation Depending on the input mode, the 3D button function may be different when viewing Native mode. Input: Function: Analog Broadcast Changes the viewing mode to 2D to 3D mode. Digital Broadcast Displays the selection window.
  • Page 78 Basic features Using 3D functions Switching to 3D mode Set 3D Auto Start to 3D. ❖ Press the 3D button and select 3D while viewing 2D mode or Native ❖ mode. Input Signal/Switching Display Mode Trigger Press 3D Button Type Additional Information Format Source Select 3D...
  • Page 79 Basic features Using 3D functions Input Signal/Switching Display Mode Trigger Quick menu/ 3D Format Select Type Additional Format Source Information Signal With 3D Auto Detect Information 3D Format Signal Without 3D Auto Detect Information 2D Format Signal * Correct 3D image. Switching to 2D mode Set 3D Auto Start to 2D.
  • Page 80 Basic features Using 3D functions Selecting 2D format from the Quick menu in 2D mode Press the QUICK button. Select 3D Settings > 2D Format Select. Press the OK button. Press the t / u (arrow) buttons to select Side by Side or Top and Bottom.

  • Page 81: Setting The 3D Pin Code

    Basic features Using 3D functions Quick menu in 2D mode Press the QUICK button. Select 3D Settings > 2D Format Select and press the OK button. Press t / u (arrow) buttons to select Native. To switch 2D to 3D mode Press the 3D button and select 2D to 3D while viewing 2D or Native ❖...
  • Page 82 Basic features Using 3D functions Change or delete your PIN code Press the SETUP button. Select 3D > 3D PIN. Press the OK button. Press the number buttons to enter your 4-digit PIN code. Select Change PIN or Delete PIN, and then press the OK button. NOTE The PIN code cannot be set to “0000.”...

  • Page 83: Displaying 3D Important Information

    Basic features Using 3D functions Enter your 4-digit 3D PIN code. Press the p / q (arrow) buttons to select 3D Lock and press the OK button. Press the p / q (arrow) buttons to select On. Setting the 3D Timer Lock When the 3D Timer Lock feature is set to On, the PIN input window and the 3D start message will not appear while the 3D Enable timer is active, even if you switch to 3D Mode.

  • Page 84: Adjusting 2D To 3D Depth

    Basic features Tuning Channels Select 3D > 3D Important Info. Read through the information. Press the t / u (arrow) buttons to select Yes or No and press the OK button. Adjusting 2D to 3D depth With this feature, you can adjust the level of 3D depth. Within the Menu: Press the SETUP button.

  • Page 85: Tuning Channels

    Basic features Selecting the video input to view Tuning Channels Tuning to the next programmed channel Press the CH p / q buttons on the remote control or TV control panel. Tuning to a specific channel (programmed or unprogrammed) Channel: Description: Analog Use the 0–9 buttons on the remote control.

  • Page 86: Using Closed Captions

    Basic features Using closed captions NOTE You can label the video input sources according to the specific devices ❖ you have connected to the TV, see “Labeling video inputs” on page You can skip sources, see “Skipping video inputs” on page ❖...

  • Page 87: Analog Cc Mode

    Basic features Using closed captions Analog CC mode The closed caption mode has two options: Mode: Description: Captions Displays the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked “CC” in program guides). Text Displays information not related to the current program, such as weather or stock data (when provided by individual stations).

  • Page 88: Digital Cc Settings

    Basic features Using closed captions NOTE If text is not available in your area, a black rectangle may appear on the screen. You can remove this rectangle by setting Closed Captions Display to Off. NOTE A closed caption signal may not be displayed when a videotape is dubbed, signal reception is weak, or signal reception is non-standard.

  • Page 89: Setting The Pin Code

    Basic features Using parental controls Using the Closed Caption button If you press the CC button when an analog channel is tuned or from an external input (480i signal from the video input): The CC bar will appear and will display the options, CC1-4, T1-4. ❖...

  • Page 90: Forgotten Pin Code

    Basic features Using parental controls Forgotten PIN code Press the SETUP button. Select Options > Parental PIN Setup. Press the OK button. Press the INFO button 4 times quickly. Select Change PIN and press the OK button. Enter a new PIN code. Locking specific channels A channel that is configured as Locked cannot be viewed unless the PIN code is entered first, see...

  • Page 91: Setting A Time Limit For Games

    Basic features Using parental controls Press the SETUP button. Select Options > Parental Control and Locks. Press the OK button. Enter your 4-digit PIN code. Press the p / q (arrow) buttons to select Input Lock and press the OK button. Press the p / q (arrow) buttons to select Video or Off.

  • Page 92: Using Hdmi ™ Cec Control

    To unlock the control panel: Select Off in Step 3 above. ❖ ™ Using HDMI CEC Control This feature uses CEC technology and allows you to control Toshiba ™ ™ HDMI CEC compatible devices from the TV remote control via HDMI connection.

  • Page 93: Controlling Hdmi ™ Cec Playback Devices

    Basic features Locking specific channels ™ Controlling HDMI CEC playback devices ™ With your TV’s remote control, you can control the connected HDMI CEC playback device (DVD player, etc.) you are watching. Button: Description: Begins playback Stops playback Pauses the picture during play or record mode Skips forward.

  • Page 94: Hdmi ™ Cec Control Input Source Selection

    Basic features Locking specific channels ™ A non-HDMI input is selected ❖ The Enable HDMI CEC Control item is set to Off ❖ ™ The connected HDMI CEC device is not a playback, recording or ❖ tuner device ™ HDMI CEC Control input source selection ™...

  • Page 95: Viewing The Hdmi ™ Signal Information

    Basic features ™ Using HDMI CEC Control Item: Description: ™ TV Auto Power If an HDMI CEC device is turned on, the TV turns on automatically. Auto Standby If the TV is turned off, it will send a message to turn off all of the ™...

  • Page 96: Setting The Computer Audio

    Basic features ™ Using HDMI CEC Control Vertical Position. If the picture is affected by interference, readjust Clock Phase and Sampling Clock. Select PC input mode, see “Selecting the video input to view” on page Press the SETUP button. Select Picture > Display Settings and press the OK button. Press the OK button.

  • Page 97: Setting The Timer To Turn On The Tv

    Basic features ™ Using HDMI CEC Control Press the p / q (arrow) buttons to select PC/HDMI 2 Audio and press the OK button. Press the p / q (arrow) buttons to select PC. NOTE To apply the setting, switch the input to PC or HDMI 2. Setting the timer to turn on the TV You can set the on timer to turn on the TV to a preset channel or input at a preset time.

  • Page 98: Setting The Sleep Timer

    Basic features ™ Viewing the HDMI signal information NOTE If you do not operate the TV for 1 hour after it is powered on by the On Timer feature, it turns off. To cancel the timer: Press the SETUP button. Select Timers >...

  • Page 99: Setting No Signal Power Down

    Basic features ™ Viewing the HDMI signal information Sleep Timer ❖ Auto shutdown after 1 hour of inactivity (after powering on by On ❖ Timer) No signal auto power off (after approximately 15 minutes of no signal) ❖ Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after about 15 minutes if no signal is detected.

  • Page 100: Displaying Tv Status Information

    Basic features Setting the timer to turn on the TV The power consumption during Active Standby is more than it during ❖ Normal Standby. After the change from Power On state to Active Standby, there may be a ❖ period of several seconds when the TV does not receive the operation from a remote control or external apparatus.

  • Page 101: Viewing Support Information

    Basic features Setting the timer to turn on the TV Viewing support information Press the SETUP button. Select Get Help > System Information. Press the OK button to display support information containing Web/ Customer service numbers for US, Canada, and Mexico. Resetting to Factory Defaults You can reset all settings and channels to Factory Defaults.

  • Page 102: Chapter 7: Picture And Sound Controls

    Chapter 7 Picture and Sound Controls Selecting the picture size You can view many program formats in several picture sizes— Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, Quad FHD, 4K Native, 4K Normal, and 4K Full. NOTE The picture size illustrations are examples only.
  • Page 103 Picture and Sound Controls Selecting the picture size You can save separate picture size preferences for each input on your TV. To select the picture size using the Quick menu: Press the QUICK button to open the Quick menu. Select Picture Size, and then press the OK button. Press the p / q (arrow) buttons to select the Picture Size, and then press the OK button.
  • Page 104 Picture and Sound Controls Selecting the picture size (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Full This setting is for viewing in the 16:9 (480i, 480p) source programs only. (Sample Illustration) Picture size - Full 16:9 If receiving a squeezed 4:3 format program, the picture is stretched horizontally to fill the width of the screen but not stretched vertically.
  • Page 105 Picture and Sound Controls Selecting the picture size The center of the picture remains close to its original proportions, but the left and right edges are stretched horizontally to fill the screen. TheaterWide2 This setting is for viewing letter box programs. A B C D E F G - - - - - - - - - - - - - - - - (Sample Illustration) Picture size - TheaterWide2, letter box The picture’s top and bottom edges may be hidden*.
  • Page 106 Picture and Sound Controls Scrolling the picture “Quad FHD” is a non-scaling display. Depending on the input signal format, the picture appears with sidebars and/or bars at the top and bottom, for example, SVGA input source. * To view the hidden areas (such as subtitles or captions), see “Scrolling the picture”...

  • Page 107: Scrolling The Picture

    Picture and Sound Controls Using the Auto Aspect feature NOTE In this picture size, the left and right sides are clipped by 128 pixels each, preventing any scaling. Scrolling the picture If the edges of the picture are hidden, you can adjust the image’s position. NOTE You can adjust the picture position when the picture size is set to TheaterWide2 or TheaterWide3.

  • Page 108: Adjusting The Picture

    Picture and Sound Controls Adjusting the picture NOTE This feature is available when Auto Aspect is set to On. Press the SETUP button. Select Picture > Display Settings > 4:3 Stretch and press the OK button. Press the p / q (arrow) buttons to select On. Press the EXIT button.

  • Page 109: Adjusting The Picture Quality

    Picture and Sound Controls Adjusting the picture NOTE The picture mode you select affects the current input only. You can select a different picture mode for each input. Adjusting the picture quality The adjustments you make to picture quality under a picture mode are saved to that picture mode.

  • Page 110: Using The Advanced Picture Settings Features

    Picture and Sound Controls Using the advanced picture settings features Press the OK button. A confirmation screen appears. Press the t / u (arrow) buttons to select Yes, and then press OK. Using the advanced picture settings features NOTE Some of the Advanced Picture Settings features will not be available for adjustment when the picture mode is set to AutoView.

  • Page 111: Clearscan

    Picture and Sound Controls Using the advanced picture settings features increased depth. Press the SETUP button. Select Picture > Advanced Picture Settings > DynaLight and press the OK button. Press the p / q (arrow) buttons to select On or Off. Press the EXIT button.

  • Page 112: Mpeg Nr

    Picture and Sound Controls Using the advanced picture settings features MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Press the SETUP button. Select Picture > Advanced Picture Settings > Noise Reduction and press the OK button.

  • Page 113: Colormaster

    Picture and Sound Controls Using the advanced picture settings features Press the p / q (arrow) buttons to select On or Off. Press the EXIT button. NOTE ® When the picture mode is set to AutoView , this feature is automatically set to On.

  • Page 114: Fine Texture Restoration

    Picture and Sound Controls Using the advanced picture settings features Press the OK button. Select Color Temperature and press the OK button. Press the p / q (arrow) buttons to select the Red Level, Green Level, or Blue Level. Press the u (arrow) button. Press the t / u (arrow) buttons to adjust the level.

  • Page 115: 3D Judder Cancellation

    Picture and Sound Controls Setting the expert picture settings 3D Judder Cancellation This feature will reduce 3D images blur without adding flicker. Press the SETUP button. Select Picture > Advanced Picture Settings > 3D Judder Cancellation. Press the OK button. 3D Judder Cancellation screen appears. Press the p / q (arrow) buttons to select Auto or Off.

  • Page 116: Rgb Filter

    Picture and Sound Controls Setting the expert picture settings RGB Filter This feature individually enables or disables the red, green, and blue components of the picture to allow for more accurate adjustment of each color. Press the SETUP button. Select Picture > Expert Picture Settings > RGB Filter and press the OK button.
  • Page 117 Picture and Sound Controls Setting the expert picture settings button. Press the p / q (arrow) buttons to select 2P White Balance and press the OK button. Press the p / q (arrow) buttons to select Red-Offset, Green-Offset, Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain. Press the u (arrow) button.

  • Page 118: Adjusting The Audio

    Picture and Sound Controls Adjusting the audio Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc. NOTE If you modify items in the Sound menu while Mute is active, Mute is cancelled.

  • Page 119: Tv Speakers On/Off

    Picture and Sound Controls Adjusting the audio Press the OK button. Press the t / u (arrow) buttons to adjust the range. Press the EXIT button. TV Speakers On/Off This feature allows you to turn the TV speakers off when connecting the audio system.

  • Page 120: Using The Dolby ® Digital Dynamic Range Control Feature

    Picture and Sound Controls Adjusting the audio Press the p / q (arrow) buttons to select Auto or Manual. Auto: This mode automatically adjusts the audio timing to meet the video timing. The time lag might be large between the image and sound depending on the connected equipment (amplifier etc.).

  • Page 121: Audyssey Premium Television

    Picture and Sound Controls Adjusting the audio NOTE ® ® This feature is available when Dolby Digital or Dolby Digital Plus is input to the TV in the following situations: When tuned to a digital RF channel ™ When an HDMI input is used This feature is automatically set to Off when Dynamic Volume (Audyssey ®...

  • Page 122: Using Audyssey Dynamic Volume

    Picture and Sound Controls Adjusting the audio ® Using Audyssey Dynamic Volume This feature provides a consistent sound volume between television programs, commercials, and between the loud and soft passages of movies. Press the SETUP button. Select Sound > Audyssey Premium Television > Dynamic Volume and press the OK button.

  • Page 123: Chapter 8: Advanced Features

    If you use Internet services, see the following note before use. NOTE Third party Internet services are not provided by Toshiba, may change or be discontinued at any time, and may be subject to third party restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability, or functionality of third party content or services.

  • Page 124: When Using A Wireless Network Connection

    Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, Toshiba believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 125: Setting Up The Network

    LAN is not securely protected. Unauthorized users may access your data and network without appropriate security measures. Selecting an encryption setting from your Toshiba TV and using a secure network for wireless LAN transmissions may help avoid unauthorized access to your important data and/or TV. Toshiba disclaims any and all responsibility or liability resulting from any wireless transmissions over the Internet through your Toshiba TV.
  • Page 126 Advanced features Setting up the Network Easy Setup using PBC (Push button configuration) Press the SETUP button. Select Network > Network Setup > Wireless Setup and press the OK button Press the p / q (arrow) buttons to select Easy Setup and press the OK button.
  • Page 127 Advanced features Setting up the Network To cancel searching for the AP: Press the BACK button while searching for the AP. A message ❖ appears. Press the t / u (arrow) buttons to select Yes, and then press the OK button. Assisted Setup Press the SETUP button.
  • Page 128 Advanced features Setting up the Network Press the p / q (arrow) buttons to select Network Name, and then press the OK button. The Software Keyboard window appears. Input the Network Name using the Software Keyboard. For more information, see “Using the software keyboard”...
  • Page 129 Advanced features Setting up the Network NOTE Settings are not saved if the BACK button is pressed before Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. Press the QUICK button. Select Wireless Information, and then press the OK button. Press the RED button to check the availability of surrounding APs.

  • Page 130: Advanced Network Setup

    Advanced features Setting up the Network Advanced Network Setup NOTE When manually setting the IP Address, set Auto Setup to Off. IP Address Setup NOTE The settings in Auto Setup are linked to those selected in the DNS Setup menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu will also be set to On.
  • Page 131 Advanced features Setting up the Network NOTE IP address field numbers must be between 0 and 255. If you input an incompatible number and press the OK button, the field number will be reset to the previous value. Press the p / q (arrow) buttons to highlight Subnet Mask, and edit in the same way as IP Address.

  • Page 132: Network Connection Test

    Advanced features Setting up the Network Press the p / q (arrow) buttons to select DNS Setup, and then press the OK button. Press the p / q (arrow) buttons to select Auto Setup and press the OK button. Press the p / q (arrow) buttons to select Off. Press the p / q (arrow) buttons to select Primary DNS Address.

  • Page 133: Using The Software Keyboard

    Advanced features Using the software keyboard Using the software keyboard You can enter text using the Software Keyboard. The Software Keyboard window will appear when you press the OK button on a field that accepts character input. NOTE When using the SmartTV features, software keyboard availability depends on the Internet service being accessed.

  • Page 134: Enter Text Using The Software Keyboard

    Advanced features Using the software keyboard Enter text using the software keyboard Highlight the desired character on the on-screen software keyboard. Press the OK button. Repeat Step 1 and 2 until you have entered all desired text. Select Done or press the GREEN button to save your settings and return to the previous screen.

  • Page 135: Performing A Software Upgrade

    Advanced features Performing a Software Upgrade Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via the Network. NOTE An Internet connection is required. Before downloading software: Configure your TV to connect to the Internet.

  • Page 136: Using Intel ® Widi

    “Connecting” will be shown on the TV. Connecting your PC to the TV the first time When selecting the Toshiba TV for the first time, a 4-digit or 8-digit code will appear on your TV screen. This code needs to be inputted into your computer to authenticate the connection.

  • Page 137: Changing The Intel ® Widi Device Name

    When doing so the following text can be seen “Do you want to unregister this device? Yes/No” (default cursor is “No”). Using the Cloud Service Toshiba's universal portal for Internet content and services. (Services are dependent on country). NOTE You need to connect to the Internet before using this feature, see “Setting...

  • Page 138: Using The Cloud Service Tv Features

    ❖ User registration or login may be required to use some services. ❖ Third party Internet services are not provided by Toshiba, may change ❖ or be discontinued at any time and may be subject to Internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third- party content or services.

  • Page 139: Netflix

    Advanced features Using the Cloud Service TV features ® ® ever to the things you love— like Netflix and Hulu Plus , along with video on demand, broadcast programming, the Web, even music, photos and videos on your home network. NOTE Apps will vary by country and availability may change in the future with respect to current apps.

  • Page 140: Internet

    Advanced features Using the Cloud Service TV features Press the t / u (arrow) buttons to select Yes, and then press the OK button. Internet Open Web Browser The open/web browser with HTML5 video and audio codecs which allow you to explore the web the way you want. Search for, bookmark, and browse your favorite sites to enjoy the content you want, with simple, intuitive navigation.
  • Page 141 Advanced features Using the Cloud Service TV features You can use the Wireless QWERTY keyboard in addition to the ❖ software keyboard. Browsing favorite websites Connect to the network. Press the button on the remote control to access the web browser page.

  • Page 142: Using Skype

    Before using Skype™ - Preparation Connect the FREETALK HD Camera: TALK-7291 to the TV’s ❖ USB port. Do not use a USB hub. For a Skype™-ready Toshiba TV compatible camera, please visit the following website: http://shop. skype.com Arrange the HD camera on top of the TV, ensuring it's in the center.
  • Page 143 Advanced features Using the Cloud Service TV features Connect to the network. ❖ NOTE The HD camera is sold separately. ❖ Do not connect a camera other than the recommended HD camera. ❖ Using a wireless network may result in degraded call quality. ❖...
  • Page 144 Advanced features Using the Cloud Service TV features Getting started Press the button on the remote control. Select Skype and press the OK button. “Welcome to Skype” screen appears. Welcome to Skype Skype Name Press [OK] Password Press [OK] Sign in when Skype starts Start Skype when TV starts Sign in Create Account...
  • Page 145 Advanced features Using the Cloud Service TV features You'll now be signed into your new account. NOTE Please ensure that you have entered your email address correctly. It is ❖ required in case you lose or forget your password. If you forget your password, visit skype.com to retrieve it. ❖...
  • Page 146 Advanced features Using the Cloud Service TV features Contacts/People Press the p / q (arrow) buttons to select Contacts tab. Press the c / p / q (arrow) buttons to select a contact. After pressing the OK button on each contact, the following functions will be displayed: No blocked contactor Name...
  • Page 147 Open dial pad End call ( Hang up the call ) Group calls Using your Toshiba TV, you can join Skype™ group voice and video calls. However, you can only send and receive audio while on these calls. NOTE You must be invited on to a group call, you cannot initiate it from the TV.
  • Page 148 Advanced features Using the Cloud Service TV features NOTE If other applications are active or recording, you'll only get an "Incoming call notification" until the application or recording has stopped. Status When pressing the GREEN button, the change status window is displayed as below.
  • Page 149 Advanced features Using the Cloud Service TV features Phone Number ❖ You can also enter a phone number in the search window. Contact Search Results Add a Skype contact Search Result: (jackyding) Full Name Skype Name Country Aaaaaa_0101 Aaaaaa_0101 Bbbbbb007 Bbbbbb007 Cccccc0709 Cccccc A01...
  • Page 150 Advanced features Using the Cloud Service TV features Press the t / u (arrow) to select and press the OK button. ms_audi Hello! Please add me to your Contacts. Accept Block Decline (Sample Image) Skype request form screen Recent You can see a list of past events in “Recent”. Press the p / q (arrow) buttons to select the Recent tab.
  • Page 151 Advanced features Using the Cloud Service TV features Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Dialer Please input the country code -Select One- Taiwan +886 Tajikistan +992 Tanzania +255 Thailand Timor-Leste +670 Togo +228 Status Add Contact Exit (Sample Image) Skype dialer screen Select the country or region first, and then enter the phone number with area code.

  • Page 152: Mediashare (Videos, Music, And Photos)

    Advanced features Using the Cloud Service TV features Audio Settings ❖ Adjust the speaker / ringtone volume manually. The volume of your speakers will be different on Skype™ compared to your normal TV volume level. The speaker volume range is 0 - 100% by 1 steps, and ringtone volume is 0 - 100% by 25 steps.

  • Page 153: Basic Operation

    FAT16, FAT32 and exFAT (SDXC memory card) ❖ NOTE You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission. Basic operation Using MediaShare with a USB or SD card When Auto Start is enabled, you will be asked if you want to start the MediaShare whenever a USB device or SD card is inserted.
  • Page 154 Advanced features Using the Cloud Service TV features Press the p / q (arrow) buttons to select the device and then press the OK button. Press the p / q (arrow) buttons to select OK and then press the OK button.
  • Page 155 Advanced features Using the Cloud Service TV features Using MediaShare with a Media Server You need to configure a home network before using this feature, see “Setting up the Network” on page 125. Press the MEDIA SHARE button. To change the device press the p / q / t / u (arrow) buttons to select the Device Name button on the screen, and then press the OK button.

  • Page 156: Viewing Movie Files

    Advanced features Using the Cloud Service TV features Viewing movie files Basic Playback Select a file, see “To select a file in the list of contents” on page 154. Press the OK button or PLAY button to begin playback. NOTE Depending on the file size, it may take some time to start playback.
  • Page 157 Advanced features Using the Cloud Service TV features To locate a specific file Press the Skip Reverse or Skip Forward button repeatedly to ❖ access the desired file. ( Z ): Playback starts from the beginning of the current file or ❖...
  • Page 158 Advanced features Using the Cloud Service TV features Press the INFO button again to hide the information. NOTE The information may not correctly display depending on the content or media server. ® To register your TV to a DivX account: ®...
  • Page 159 Advanced features Using the Cloud Service TV features must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
  • Page 160 Advanced features Using the Cloud Service TV features Using Multi Title and Alternative Timelines Multi Title ® DivX Plus HD files may contain up to 100 titles. You can change the title (It contains same video file) by pressing the RED button.

  • Page 161: Playing Music Files

    Advanced features Using the Cloud Service TV features NOTE It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as pause. Playing music files Basic Playback Select a file, see “To select a file in the list of contents”...
  • Page 162 Advanced features Using the Cloud Service TV features To set the repeat mode Press the QUICK button. Press the p / q (arrow) buttons to select the Repeat. The current repeat setting appears. Press the t / u (arrow) buttons to select Off, All, or 1. Press the BACK button.

  • Page 163: Viewing Photo Files

    Advanced features Using the Cloud Service TV features File format: MP3, MP4 (AAC), WMA9 std, LPCM ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of files: 1000 per folder ❖...
  • Page 164 Advanced features Using the Cloud Service TV features NOTE Single view mode is changed to Multi View mode when the BACK button is pressed. Slide Show mode This view allows you to watch a slide show of the photos. In this mode, only files located in the selected directory appear.

  • Page 165: Search

    Advanced features Using the Cloud Service TV features To select a photo from Play List (except for Media Renderer function) While in the Single View mode or Slide Show mode, you can select a different photo from the Play List. Press the QUICK button to open the Quick Menu from Single View mode or Slide Show mode.

  • Page 166: Network Device Setup

    Advanced features Using the Cloud Service TV features Videos; Title name Music; Title name/Artist name/ Album name Photos; Title name USB/SD card ❖ Videos/Music/Photos; File name NOTE Folders are not subject to the search function. The retrieval result is displayed. Select one of the search results.

  • Page 167: Setting Up The Media Renderer Feature

    Advanced features Using the Cloud Service TV features Use the p / q (arrow) buttons to select Home Control Profile and press the OK button. The Home Control Profile window will appear. Use the p / q / t / u (arrow) buttons to navigate to the User Name or Password field.

  • Page 168: Chapter 9: Cloud Service Tv Companion Apps

    Cloud Service TV Companion Apps Using Apps on a Tablet or Smart phone Toshiba provides apps for tablets and smart phones. The apps will vary by country and availability may change in the future with respect to current apps. NOTE Apps will vary by country and availability may change in the future on current apps.

  • Page 169: Apps Control Profile

    Apps Collaboration Apps Control Profile Apps can only be used when your TV and your tablet or smart phone are connected to the Internet. Some app features may require the TV and smart phone/tablet to be on the same home network connection. Starting and operation of this service may take several minutes.

  • Page 170: Pairing

    Apps Collaboration Pairing To enable the New Device Detection: Press the SETUP button. Select Network > Network Device Setup > External Control Setup and press the OK button. Press the p / q (arrow) buttons to select and set Apps Control Profile and press the OK button.

  • Page 171: Chapter 10: Troubleshooting

    General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba Technical Support Website at "www.toshiba.ca/support/ceg" for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, first unplug the TV from the AC wall outlet, wait approximately one minute, and then plug the TV back into the AC wall outlet.

  • Page 172: Picture Problems

    Troubleshooting Picture problems Other problems. If your TV’s problem is not addressed in this Troubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 101. TV will not turn on. Check the AC wall outlet by trying another device in the AC wall outlet.
  • Page 173 Troubleshooting Picture problems If Resolution+ does not achieve a sharper picture, change the Sharpness value to increase the sharpness level, see “Resolution+” on page 110. Video Input Selection problems. If the Input Selection window does not appear when you press INPUT on the remote control or the TV control panel, press INPUT a second time.

  • Page 174: Sound Problems

    Troubleshooting Sound problems Sound problems Check the antenna/cable connections, see “Connecting a digital audio system” on page The station may be having broadcast difficulties. Try another channel. The sound may be muted. Press the VOL (+ -) buttons or MUTE button. If you are connected to a computer using either the PC IN terminal or ™...

  • Page 175: Closed Caption Problems

    ❖ For additional information, see “Using closed captions” on page ™ HDMI CEC Control operation ™ HDMI CEC Control feature is available for Toshiba HDMI™ CEC compatible devices. ™ HDMI cables. ™ Ensure that HDMI cables with the ( ) Logo are used.

  • Page 176: Network Problems

    Troubleshooting ™ HDMI problems Network problems Cannot connect to the Internet. Check the modem and its incoming cable/telephone connections, see “Connecting to a home network” on page Confirm your modem’s operation. Ensure that your IP address is set up correctly, see “IP Address Setup”...

  • Page 177: Wireless Network Problems

    Troubleshooting Network problems Example of improper setup: The computer has the IP address ❖ 192.168.1.100 with the Subnet mask 255.255.255.0, the TV has the IP address 192.168.0.101 with the Subnet mask 255.255.253.0; they are on different subnets. Unstable network connection. When using a wired home network connection, unplug the LAN cables, and then reconnect them.

  • Page 178: Mediashare Problems

    Troubleshooting Wireless network problems Check the router/AP’s connection status. If the router/AP does not support PBC or WPS, Easy Setup (PBC) will not work even if the push-button is pressed, see “Wireless Setup” on page 125. If the available router/AP list is not displayed in Easy Setup (PBC) or Assisted Setup, the power of the router/AP may be Off.

  • Page 179: Cloud Service Tv

    The power is Off or in Standby. ❖ If the problem persists after trying the solutions In the U.S., visit Toshiba Customer Support Center on the web at "support.toshiba.com" or call 800-631-3811. From outside the United States, call (949) 583-3050.

  • Page 180: Appendix A: Specifications

    Appendix A Specifications NOTE This model complies with the specifications listed below. Designs and specifications are subject to change without notice. This model may not be compatible with features and/or specifications that may be added in the future. Television system NTSC standard ATSC standard 8VSB...

  • Page 181: Power Consumption

    Specifications Power source Power consumption 58L9300UC 2.1 A (maximum current) 0.2 W in Standby mode 65L9300UC 3.2 A (maximum current) 0.2 W in Standby mode 84L9300UC 5.3 A (maximum current) 0.2 W in Standby mode Audio power 58L9300UC 10 W + 10 W...

  • Page 182: Digital Audio Output

    Universal Serial Bus Specification, Revison 2.0. SD card SD, SDHC and SDXC memory card Dimensions with table stand Width 51.4” (1306 mm) 58L9300UC Height 33.7” (857 mm) Depth 14.7” (374 mm) Width 57.6” (1463 mm) 65L9300UC Height 37.0” (940 mm) Depth 14.7”...

  • Page 183: Weight (Mass) With Stand

    Pedestal Stand Assembly instructions Warranty information Wireless QWERTY keyboard with touchpad (2x AA batteries) IR blaster cable Toshiba 3D glasses For 58L9300UC: FPT-AG03 (1x CR2032 battery) x 2 For 65L9300UC/84L9300UC: FPT-P100 x 4 For 84L9300UC: AC power cord Ferrite core attachment...

  • Page 184: Acceptable Signal Formats For Pc In, And Hdmi

    Specifications Acceptable signal formats for PC IN, and HDMI ™ , and 3D ™ Acceptable signal formats for PC IN, and HDMI , and 3D PC IN signal formats NOTE The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below.

  • Page 185: Hdmi ™ Signal Formats

    Specifications ™ Acceptable signal formats for PC IN, and HDMI , and 3D ™ HDMI signal formats NOTE ™ The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in ™...

  • Page 186: 3D Signal Formats

    Certain HDMI formats or still images exceeding “4K” resolution may not be supported. May require purchase of additional external hardware, software and/or services. Toshiba makes no representation or warranties about any future “4K” content, standards or services. Get other manuals https://www.bkmanuals.com...

  • Page 187: Operating The Tv With Combination Buttons

    Specifications Operating the TV with combination buttons Operating the TV with combination buttons You can directly operate the TV power, input, picture size, and picture mode by pressing a combination button while holding down a color button. Button Color Combination Button Behavior/Mode INPUT Power Off...

  • Page 188: Appendix B: Wireless Qwerty Keyboard With Touchpad

    Appendix B Wireless QWERTY keyboard with touchpad How to enter French or Spanish characters using the Wireless ❖ QWERTY keyboard with touchpad For how to use the Wireless QWERTY keyboard with touchpad, ❖ refer to the User's Guide that comes with the keyboard. Setting the keyboard layout Before entering French or Spanish characters, configure the following setting on the TV:...
  • Page 189 Printing \ Simultaneous Key normal Shift Right Alt(Alt Gr) Shift + Right Alt a and A a or A á or Á b and B b or B c and C c or C © ¢ d and D d or D Ð...
  • Page 190 Printing \ Simultaneous Key normal Shift Right Alt(Alt Gr) Shift + Right Alt ] and } » ” \backslash and | ¬ ; and : ¶ ° ‘ and “ ´ ¨ Grave Accent(`) and Tilde(~) , and < < ç...

  • Page 191: International Key Table

    International Key table To enter special characters, follow the table below: Diacritic press first press second (Dead key) Space Acute ' or ´ É é Á á Ó ó Ú ú Ý ý Í í Ź ź Ŕ ŕ Grave È...

  • Page 192: Index

    Index Numerics advanced picture settings 2D from Quick menu 80 3D Judder Cancellation 115 3D from Quick menu 78 Ambient Light Sensor 112 3D lock 82 Base Color Adjustment 113 3D timer lock 83 Brilliance Restoration 114 ® adjusting 2D to 3D depth 84 ClearScan auto start mode 81 Color temperature 113...
  • Page 193 Index optical audio output format 119 connecting Auto Aspect a computer 43 using 107 audio system 38 cable TV 32 camcorder 32 cables computer to TV’s PC IN 43 3.5mm to RCA Y-cable 31 ® DVD player with ColorStream analog RGB (15-pin) 31 coaxial (F-type) 29 ™...
  • Page 194 Index Factory Defaults network reset 101 advanced setup 130 favorites connection test 132 adding 141 DNS setup 131 browsing 141 quick setup 58 features 21 setup 125 wireless setup 125 Network Device Setup 166 ™ HDMI no signal power down viewing signal information 95 set 99 ™...
  • Page 195 138 turn on TV 97 SmartTV™ troubleshooting 171 ® Netflix channel tuning problems 174 software keyboard closed caption problems 175 using 133 contact Toshiba 179 software licenses ™ HDMI show 135 ™ HDMI CEC Control problems software upgrade performing 135...
  • Page 196 Index TV panel connections back 26 TV panel controls front 24 left side 24 side 24 TV remote control other devices 50 effective range 52 functionality 53 install batteries 50 TV status information show 100 Video video input locking 90 selecting 85 web browser 140 access web page 140...

This manual is also suitable for:

65l9300uc84l9300uc

Table of Contents