Servicing The Spark Plug - Toro 38751 Operator's Manual

Figure 29
9. Screw the oil-fill cap into the oil-fill hole, and tighten
it securely by hand.
10. Wipe up any spilled oil.
11. Dispose of the used oil properly at a local recycling
center.

Servicing the Spark Plug

Service Interval: Every 50 hours
Yearly
Use a NGK BPR6ES or Champion RN9YC spark plug
or equivalent.
1. Shut off the engine and wait for all moving parts to
stop.
2. Rotate the discharge chute so that it faces forward.
3. Remove the discharge chute by removing the 3 screws
holding the chute, and the screws holding the chute
seal (Figure 30).
4. Remove the 4 screws that secure the shroud
14
G016327
Figure 30
(Figure 31).