en-us Basic Operation
Notes
¡ Unintentional operation is
activated when:
– Pressing Start to begin a
wash cycle
– Setting Delay time and
pressing Start
– Opening the door while De-
lay time is active
– Opening the door during a
wash cycle.
¡ This feature cannot be deacti-
vated.
13.2 Switching on the
appliance
Touch
▶
second touch.
The cycle last selected and the
option last selected will be set
by default.
The buttons on the appliance
are touch sensitive and only re-
quire a quick, gentle touch.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
13.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable program.
Press the right cycle button.
▶
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
13.4 Setting options
You can set options to complete
the chosen wash program.
Note: The available options de-
pend on which program is se-
lected.
28
with a short 1
Press the button for the rele-
▶
vant option.
a The option is set and the option
button flashes.
13.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
Press
.
1.
a "h:01" appears on the display.
Use
to set the required
2.
start time for the wash cycle.
Press
.
3.
a This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
until "h:00" appears on the dis-
play.
13.6 Starting the wash
cycle
Press
.
▶
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
¡ You can only change a cycle in
progress if you can cancel it
first.
→ "Terminating the wash cy-
cle", Page 29
repeatedly