Download Print this page

DeWalt DCMHT563P2 Original Instructions Manual page 35

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D
WALT battery packs only with
e
designated D
WALT chargers. Charging battery
e
packs other than the designated D
batteries with a D
e
them burst or lead to other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap).
Example: Wh rating indicates 3 x 36 Wh
(3 batteries of 36 Wh).
Battery Type
The DCMHT563 operates on a 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.
Package Contents
The package contains:
1 Hedge Trimmer
WALT
e
WALT charger may make
1 Li-Ion battery pack (P1 models)
1 Instruction manual
Check for damage to the tool, parts or accessories which
may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high humidity
or leave outdoors while it is raining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from the tool.
Keep people and animals at least 6 m away
from the work area.
Keep bystanders away.
98
Directive 2000/14/EC guaranteed sound power.
94
98
(A)
Date Code Position (Fig. L)
98
The date code 
, which also includes the year of
 12 
98
manufacture, is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
Trigger switch
1
Lock-off switch
2
Switch handle
3
Blade guard
4
Bail handle
5
Blade
6
Sheath
7
Battery housing
8
EngLIsh
33

Advertisement

loading

This manual is also suitable for:

Dcmht563