Panasonic MC-CG710 Series Operating Instructions Manual
Hide thumbs
Also See for MC-CG710 Series:
- Operating instructions manual (8 pages) ,
- Operating instructions manual (12 pages)
Advertisement
Thank you for purchasing the Panasonic product.
Before use, please read this Operating Instructions
completely in order to use this product properly and
ensure its lasting operation. After reading this
manual, store it safely. This Vacuum Cleaner is
designed for household use only.
Model No.
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
MC-CG717
MC-CG715
MC-CG713
MC-CG711
Operating Instructions
Vacuum Cleaner (Household Use)
MC-CG710 Series
............................................. 5
................................................................ 6
............................................................................. 13
................................................ 16
.......................................................................... 18
.............. 2
ھ
........................... 9
.............................. 10
................................ 11
Advertisement
Related Manuals for Panasonic MC-CG710 Series
Summary of Contents for Panasonic MC-CG710 Series
-
Page 1: Table Of Contents
MC-CG715 MC-CG713 MAINTENANCE ................13 MC-CG711 Thank you for purchasing the Panasonic product. BEFORE REQUESTING SERVICE ..........16 Before use, please read this Operating Instructions completely in order to use this product properly and ensure its lasting operation. After reading this manual, store it safely. - Page 2 IMPORTANT SAFETY INSTRUCTIONS FOR THE USER In order to prevent the risk of danger to the user of this product or those nearby and damaging property, be sure to follow the safety precautions outlined below. • The following terms are used for precautions. They are separated depending on the degree of the danger or damage that may occur if their contents are ignored while using this product.
- Page 3 •...
- Page 4 This term cautions you that injury or physical damage to property may result by incorrect operation of the product. BL OW 1. To avoid any possible damage to the Supply Cord, never 2. When winding up the Supply Cord, always hold the Plug. allow it under a heavy object when using the Vacuum If not, may cause an accident by being hit by the Plug.
-
Page 5: Vacuum Cleaner Accessories
VACUUM CLEANER ACCESSORIES DESCRIPTION MC-CG717 MC-CG715 MC-CG713 MC-CG711 Hose Assembly 1 PC 1 PC 1 PC 1 PC Magic Telescopic Wand 1 PC 1 PC Metal Telescopic Wand 1 PC 1 PC Curved Wand 1 PC 1 PC 1 PC 1 PC Crevice Nozzle 1 PC... -
Page 6: Parts Identification
PARTS IDENTIFICATION Curved Wand Locking Hook Locking Ribs Insert the Crevice Nozzle until fully lock with hook. Insert the Dusting Brush until fully lock with ribs. Curved Wand Hose Suction Regulator Telescopic Wand Crevice Dusting Brush Nozzle Insert and twist to connect. Twist and pull to disconnect. - Page 7 Telescopic Wand Dusting Brush Crevice Nozzle • Insert and twist to connect. • Twist and pull to disconnect. • Telescopic Wand length can be adjusted. • Dusting Brush use to clean furniture, venetian blinds, and bookshelves. To be attached onto the Crevice Nozzle. For Model: For Model: MC-CG711...
- Page 8 Floor Nozzle Crevice Nozzle • For cleaning gaps between furniture, corners of sofas, gaps and etc. in flooring. • ■ Wood Flooring / To avoid scratching the floor surface, lightly slide the Floor • Nozzle over the flooring with the grain of the wood. NOTE / To prevent damaging the floor surface, do not vacuum by moving the Floor Nozzle side to side.
-
Page 9: How To Operate Your Vacuum Cleaner
HOW TO OPERATE YOUR VACUUM CLEANER Pull out the Plug and connect with the socket outlet. To decrease the power, adjust the power control to ‘MIN’ To increase the power, adjust the power control to ‘MAX’. B LO Press at the center of OFF/ON Switch Pedal to on the Vacuum Cleaner. -
Page 10: How To Store Your Vacuum Cleaner
HOW TO STORE YOUR VACUUM CLEANER Storage position (2 ways to store) 1. Stand the unit up and insert the Nozzle Holder straight into the Nozzle 2. Adjust the Telescopic Wand to the Supporter, on the underside of the Vacuum Cleaner body. shortest length, then disconnect the Curved Wand and wrap it around. -
Page 11: How To Clean Your Cloth Dust Bag
HOW TO CLEAN YOUR CLOTH DUST BAG Indicator for cleaning Cloth Dust Bag Turn on the Vacuum Cleaner in maximum power condition and lift the nozzle off the floor. If the VAC Gauge turn red, the Cloth Dust Bag is full and required to clean the Cloth Dust Bag. - Page 12 Installing the Cloth Dust Bag / In order to avoid any dust leakage, please ensure that all the edges of Cloth Dust Bag are aligned as shown in the Figure 1 before assemble the Bag Fastener. Figure 1 After assemble the Bag Fastener, any opening of Cloth Dust Bag should not be observed as shown in the figure 2.
-
Page 13: Maintenance
MAINTENANCE Before starting maintenance, switch off the power and disconnect the Plug from the socket outlet. ■ ■ When particulary dirty (nozzle only) Floor Nozzle (check once a month) 1. Wash with water and shake firmly about five times with •... - Page 14 Precaution / Filter / • Do not use the Vacuum Cleaner to suck up liquids 1. Remove the Cloth Dust Bag. or wet dust. (Refer details on page 11) 2. Remove the Filter. / Liquid Pre-Filter Filter Filter • Be sure to re-install the Filter to the original location after the Filter has been removed for cleaning, etc.
- Page 15 Filter care / HEPA Antibacteria Filter or Antibacteria Filter (depending in the model), is installed on the rear side of the Vacuum Cleaner. This Filter retains any small dust particles which may be present in the expelled air. It is advisable to change the HEPA Antibacteria Filter or Antibacteria Filter every year.
-
Page 16: Before Requesting Service
Failure to do so could result in electrical shock or personal injury from Vacuum Cleaner suddenly starting. Review this chart to find do-it-yourself solutions for minor performance problems. Any service needed, other than those described in these Operating Instructions, should be performed by an authorised Panasonic service representative. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Vacuum Cleaner not operate. - Page 17 If the problem remains after checking. Return the Vacuum Cleaner (with the Hose, Extension Wand and Floor Nozzle) to the store where you purchased it. Do not attempt to repair it by yourself. • During operation, the temperature of the Vacuum Cleaner body, Supply Cord and Supply Cord Plug may increase to a certain degree.
-
Page 18: Specifications
SPECIFICATIONS MODEL MC-CG717 MC-CG715 MC-CG713 MC-CG711 220 - 240 V ~ 50/60 Hz POWER SOURCE INPUT POWER (MAX) 2300 W 2100 W 2000 W 1900 W INPUT POWER (IEC) 1600 - 2000 W 1550 - 1900 W 1500 - 1800 W 1450 - 1700 W SLIDE POWER CONTROL... - Page 19 MC-CG717 MC-CG715 MC-CG713 MC-CG711...
- Page 20 Production: Panasonic Manufacturing Malaysia Berhad 196501000304) No.3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site, 40200 Shah Alam, Selangor Darul Ehsan, Malaysia. http://www.panasonic.com V01ZBW400-W © Panasonic Corporation 2011 Printed in Malaysia H1011Z40123...