Advertisement
Listening to a CD (CDs)
1
Press the CD button.
2
Press the
OPEN/CLOSE button to open the disc tray 1.
3
Place the CD on the disc tray 1, label side up.
4
Press the
5
You can place discs on trays 2 - 5 by following steps 2 - 4.
6
Press the
Listening to a cassette tape
1
Press the TAPE button.
2
Open the cassette door by pushing the area marked "
PUSH EJECT".
3
Load a cassette into the cassette compart-
ment with side A facing you.
4
Press the
both sides.
5
Press the
for side B.
XLHP404E_QG.pm
Downloaded from:
http://www.usersmanualguide.com/
1 button and within 5 seconds, press the
12 cm (5")
8 cm (3")
OPEN/CLOSE button to close the disc tray 1.
/
button to start playback.
button to choose one side or
/
button to listen to side A, or the
2
Listening to the radio
1
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
2
Press the TUNING (
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
● " " will appear when an FM broadcast is in stereo.
If trouble occurs
■
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Clearing all the memory (reset)
■
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the
DEMO button, press the
"CLEAR AL" appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
■
Routine maintenance is required for continued optimum perfor-
button
mance, refer to the operation manual (page 32).
03.12.4, 4:24 PM
or
) button to tune in to the desired
FM stereo mode indicator
FM stereo receiving indicator
button and the X-BASS/
PRESET
button until
Advertisement
