Whirlpool AKM 293/IX Instructions For Use Manual page 9

FIXING TO THE SUPPORT STRUCTURE -
CONVENTIONAL FITTED MODEL
(SEMI-FLUSH)
Important: The following operation must be carried out by
a competent technician. Installation can be carried out on
different materials: such as masonry, metal, solid wood and
plastic laminated wood provided it is heat resistant (T 90°C).
Make an opening in the top, of the dimensions shown in fig. 1.
Carefully apply the insulating sealing strip (supplied) around the
outside edge of the hob as shown in the figure below, pressing
lightly to make it adhere (Fig. 2).
Fix the hob with the special brackets supplied.
The supply includes 2 types of brackets:
- 8 of standard length (Service Code 4812 404 49874) for
installation on kitchen tops thicker than 4 cm
- 8 longer than standard (Service Code 4812 404 49875) for
installation on kitchen tops less than 4 cm thick
The brackets must be fixed with the special screws to the front (4)
and the back (4) using the seats on the bottom of the hob (Fig. 3).
Important: The power cable must be long enough to allow the
hob to be removed upwards.
1136
+1
1148
- 0
Fig. 1
Fig. 2
Fig. 3
25