Power Indicator; Power Management Function; Picture Size; Picture Mode - NEC M46B-AVT User Manual

Power Indicator

Mode
Power ON
Power OFF (ECO STANDBY)*
Power consumption under 1W
Power OFF (STANDBY)
Power consumption under 4W
Power Save
Power Standby when
"SCHEDULE SETTINGS"
enabled
Diagnosis (Detecting faiure)
*When in Eco Standby Mode RS-232C controls do not function.
*
If "OFF" is selected in POWER INDICATOR(See page 30), the LED will
2
not light when the LCD monitor is active mode"
Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving func-
tion that automatically reduces the power consumption of
the display when the keyboard or the mouse has not been
used for a fixed period of time.
The power management feature on your new display has
been set to the "ON" mode. This allows your display to enter
a Power Saving Mode when no signal is detected. This could
potentially increase the lifetime of the display while power
consumption is decreased.
STANDBY mode is used when the display is connected to an
RS-232C cable or when using the INPUT DETECT function.
ECO STANDBY uses less power, but the RS-232C and
INPUT DETECT functions are not available.

Picture Size

The size of the picture can be changed depending on the
aspect ratio (4:3, 16:9, etc.) of the input signal.
DVI, VGA, RGBH/V, OPTION FULL
HDMI, DVD/HD, VIDEO, TV FULL
Signal Type NORMAL SIZE
NORMAL
4:3
ZOOM
(DYNAMIC)
FULL
Squeeze
WIDE
Letterbox
Status Indicator Light
Green*
2
Red
Amber
Amber Blinking
Green and Amber
blink alternately
Red Blinking
(See Trouble Shooting page 40)
ZOOM NORMAL
WIDE ZOOM NORMAL
RECOMMENDED SIZE
Basic Operation

Picture Mode

Choose the Picture Mode that is most suitable for the type of
content that is shown.
Standard: for images
sRGB: For text based applications.
Highbright: for moving images
Cinema: for movies
DVI, VGA,
RGB/HV, OPTION
HDMI, DVD/HD,
VIDEO, TV

Information OSD

The Information OSD provides information such as: Moni-
tor ID, Input Source, Picture Size, etc. Press the DISPLAY
button on the remote to bring up the Information OSD.
ID number assigned to current monitor*
1
ID number assigned monitor to be controlled via RS-232C*
2
Input Source
3
Audio input mode
4
Picture size
5
Input Signal Information
6
Sub picture information
7
*3: "IR CONTROL" should be set "Primary" or "Secondary".
*4: "IR CONTROL" should be set "Primary".
English-25
- continued
STANDARD sRGB HIGHBRIGHT
STANDARD CINEMA HIGHBRIGHT
3
4