Craftsman 247.11683 Operator's Manual page 24

Craftsman Snow Thrower Model 247.11683
1.KEEP AWAY FROM ROTATING AUGER
CONTACT WITH AUGER CAN AMPUTATE
HANDS AND FEET.
2.DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
3.TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS
USE EXTRA CAUTION WHEN OPERATING
ON GRAVEL SURFACES.
4.READ OPERATOR'S MANUAL.
777D16369
21
"
CLEARING
WIDTH
123 4-CYCLE OHV
cc
777I22139
PARTS LIST
STARTING
INSTRUCTIONS:
1.) INSERT IGNITION KEY AND SNAP IN PLACE.
2.) MOVE CHOKE CONTROL TO THE "CHOKE"
POSITION. PUSH PRIMER BUTTON 5x.
3.)
ROPE START: PULL SLOWLY UNTIL HARDER
TO PULL, THEN PULL RAPIDLY TO START.
REPEAT PRIMING IF NEEDED.
4.) MOVE CHOKE CONTROL SLOWLY TO THE
"RUN" POSITION.
5.) TO STOP ENGINE: PULL KEY OUT.
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPU TATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND
MOVING PARTS HA VE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.
777D16367
777S33995
CUT OUT
777S32236
DANGER
WAIT UNTIL AL L
777I23574
24
CHOKE
RUN CHOKE
LOCATED
BELOW
777S33118
DANGER
AVOID INJU RY FROM
RO TATING AUGER-
KEEP HANDS, FEET
AND CLOTHING AWAY.
777X43688
DO NOT
USE E85 OR FUEL
CONTAINING MORE
THAN 10% ETHANOL
STOP