Advertisement
INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1:
(SEE FIGURE 2)
•
Open parts bag labelled "
are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
STEP 2:
(SEE FIGURE 3)
•
Remove tractor hood. (Refer to tractor manual.)
•
Remove the browning shield as shown.
STEP 3:
(SEE FIGURE 4)
•
Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for second
plug.
STEP 4:
(SEE FIGURE 5)
•
Insert a carriage bolt into the second mounting hole
from the front of the tractor frame and fully tighten a
whizlock nut onto the bolt. Repeat on other side of
tractor.
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
A" and verify that all parts
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
A
(not full size)
PARTS BAG "A"
Ref.
Part
Qty. Description
A
43350
4
B
44072
4
C
R19171616
4
D
44742
2
65932
1
REMOVE
FRONT SCREWS
REMOVE
BROWNING SHIELD
BUMPER
PUSH DOWN
WITH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
B
D
FIGURE 2
Carriage Bolt, 3/8-16 x 1"
Whizlock Nut, 3/8"
Washer, 1/2" x 1"
Plug
Bumper
FIGURE 3
SHORT STEP
PLUG
FIGURE 4
CARRIAGE BOLT
AND WASHER
WHIZLOCK
NUT
FIGURE 5
C
3
Advertisement
