Advertisement
2
Check the orientation of the power cable and cable holder.
Power plug
Cable holder
Power cable
3
Hold the screen and secure the power plug.
A Check the position of the power plug on the back cover of the screen.
B Secure it tightly to the back cover side.
5
Secure the ring cover of the stand.
A Align the screen back cover and ring cover [●mark] and install them.
B Check if it sits tightly as shown in the gure.
A
B
A
4
Secure the screen to the stand.
A Insert the stand hook into the back cover groove and tighten
while pushing the lower part, as shown in the gure.
(Push it until you hear a [click] sound.)
B Secure one screw to the cable holder.
B
A
B
1
X
Advertisement
