Table of Contents
Advertisement
Quick Links
System Upgrades and Repairs
LIFEBOOK U5313X
Version date
Category
Version number
Classification
Contents
Page 1 of 41
17.05.2023
System Upgrades and Repairs
1.0
Non-classified - public
2
3
4
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
30
31
32
33
35
37
38
39
41
Advertisement
Table of Contents
Related Manuals for Fujitsu LIFEBOOK U5313X
Summary of Contents for Fujitsu LIFEBOOK U5313X
-
Page 1: Table Of Contents
Remove the keyboard Remove the mainboard / WLAN / memory Remove the rear camera Remove the LCD assy Remove the LCD cover Remove the hinges LIFEBOOK U5313X Additional information LIFEBOOK U5313X Disposal information for recycling companies Version history Page 1 of 41... -
Page 2: System Upgrades And Repairs
System Upgrades and Repairs We recommend printing out the relevant sections of this chapter prior to installation as the device for installing/removing hardware components needs to be switched off. The following illustrations may differ from your device, depending on its configuration and features. If you have received any further documents with your device, you should read these through carefully. -
Page 3: Information On The Installation And Removal Of Components
Information on the installation and removal of components These instructions provide information on disassembling the device in addition to upgrading or exchanging components. The steps in these instructions describe the removal of a component. Installation is carried out in the reverse order. Specifics are separately described after the removal. -
Page 4: Screws
Screws Screw: M2.5XL2.5 (D4.5) Screwdriver: Phillips PH00 (ISO 8764) Screw: M2.5XL6 (D4.5) Screwdriver: Phillips PH00 (ISO 8764) Screw: M2.5XL4 Screwdriver: Phillips PH00 (ISO 8764) Screw: 2.5XL2 Screwdriver: Phillips PH 00 (ISO 8764) Screw: 2XL3.5 Screwdriver: Phillips PH 00 (ISO 8764) Screw: M2.0XL2.5 Screwdriver: Phillips PH00 (ISO 8764) Page 4 of 41... - Page 5 Screw: M2.5XL2 HSK Screwdriver: Phillips PH 00 (ISO 8764) Screw: M2.5XL2.5 (D4.5) Screwdriver: Phillips PH00 (ISO 8764) Screw: M2.5XL3.3 Screwdriver: Phillips PH00 (ISO 8764) Return to Table of Contents Page 5 of 41...
-
Page 6: Tools
Tools Screwdriver: Phillips PH00 (ISO 8764) Plastic tool (from iFixit: Part # 922-5065) Plastic tool (from iFixit: Part # SKU: EU145335-1) Return to Table of Contents Page 6 of 41... -
Page 7: Switch Off The Battery
Switch off the battery Required work steps: Required tools: ■ ■ Pin for SimTray or Close the notebook ■ e.g. wire or pen ■ Remove cables and components ► Press the battery reset button for 5 seconds. Return to Table of Contents Page 7 of 41... -
Page 8: Remove The Sim Card Cover
Remove the SIM card cover Required work steps: Required tools: ■ ■ none Close the notebook ■ Remove cables and components ► Open the cover (1). ► Pull the cover out completely (2). ► Remove the cover (3). Return to Table of Contents Page 8 of 41... -
Page 9: Insert The Sim Card Cover
Insert the SIM card cover Required work steps: Required tools: ■ ■ none Close the notebook ■ Remove cables and components ■ Remove the SIM card cover ► Insert the bracket (1) of the cover into the opening for the SIM card holder (2). ►... -
Page 10: Remove The Pen
Remove the pen Required work steps: Required tools: ■ ■ none Close the notebook ■ Remove cables and components ► Remove the pen in the direction of the arrow (1). Return to Table of Contents Page 10 of 41... -
Page 11: Insert The Pen
Insert the pen Required work steps: Required tools: ■ ■ none Close the notebook ■ Remove cables and components ■ Remove the pen ► Move the pen in the direction of the arrow (1). Return to Table of Contents Page 11 of 41... -
Page 12: Mandatory Support Bulletins
Mandatory Support Bulletins SB-M-10030 Minimum requirements to properly finalise hardware repairs on mobile systems SB-M-15007 WIN8x & WIN10 - Spare product key for repaired devices For any information about ESD, please refer to the web-based training course “ESD in electronics“ SB-M-22005 Creating a new Maintenance USB Stick FjAHDT. -
Page 13: Remove The Lower Assy
Remove the lower assy Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Close the notebook ■ Plastic tool ■ Remove cables and components ■ Switch off the battery ► Remove the screws (1). ► Remove the cover (2). Return to Table of Contents Page 13 of 41... -
Page 14: Remove The Battery
Remove the battery Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy The improper exchanging of the lithium battery can result in a danger of explosions! The lithium battery may be replaced only by a battery recommended by the manufacturer. Do not dispose of lithium batteries in the household waste. -
Page 15: Insert The Battery
Insert the battery Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Connect the cable. Page 15 of 41... - Page 16 ► Tighten the screws (1). Once the battery has been replaced, the AC adapter needs to be connected to the device so the battery is once again ready for use. Return to Table of Contents Page 16 of 41...
-
Page 17: Remove The M.2 Module
Remove the M.2 module Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Remove the screw (1). ► Remove the module (2). Return to Table of Contents Page 17 of 41... -
Page 18: Insert The M.2 Module
Insert the M.2 module Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery Please note the coding. ► Insert the module (1). ► Tighten the screw (2). Return to Table of Contents Page 18 of 41... -
Page 19: Remove The Lte Module
Remove the LTE module Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery Antenna colour ► Remove the cables (1). yellow MAIN ► Remove the screw (2). -
Page 20: Remove The Fan
Remove the fan Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Remove the cable (1). ► Remove the screws (2). Return to Table of Contents Page 20 of 41... -
Page 21: Remove The Sub Board Switch
Remove the sub board switch Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery ■ Remove the LTE module ► Open the connector lock and remove the cable (1). ►... -
Page 22: Remove The Fingerprint Sensor / Power Button
Remove the fingerprint sensor / power button Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ■ Remove the LTE module ■ Remove the sub board ►... -
Page 23: Remove The Speaker
Remove the speaker Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery ► Remove the cable (1). ► Remove the speakers (2). Return to Table of Contents Page 23 of 41... -
Page 24: Remove The Smartcard Reader
Remove the SmartCard reader Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ■ Remove the speaker ► Remove the screw (1). ► Remove the cover (2). ►... -
Page 25: Remove The Touchpad Buttons Sub Board
Remove the touchpad buttons sub board Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery ► Open the connector locks and remove the cables (1). ►... -
Page 26: Remove The Cmos Battery
Remove the CMOS battery Required work steps: Required tools: ■ ■ Plastic tool Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Remove the cable (1). ► Remove the battery (2). Return to Table of Contents Page 26 of 41... -
Page 27: Remove The Pen Garage
Remove the pen garage Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Remove the cable (1). ► Remove the screw (2). ► Remove the pen garage (3). Return to Table of Contents Page 27 of 41... -
Page 28: Remove The Keyboard
Remove the keyboard Required work steps: Required tools: ■ ■ Plastic tool Switch off the battery ■ Remove the lower assy ■ Remove the battery ► Open the connector locks and remove the cables (1). ► Press the latch in the direction of the arrow (2) ►... - Page 29 ► Lift the plastic strip (1). ► Slide the plastic strip in the direction of the arrow (2, 3). ► Remove the plastic strip (4). ► Slide the keyboard in the direction of the arrow (5). ► Remove the keyboard (6). Return to Table of Contents Page 29 of 41...
-
Page 30: Remove The Mainboard / Wlan / Memory
Remove the mainboard / WLAN / memory Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery ■ Remove the M.2 module ■ Remove the LTE module ■... -
Page 31: Remove The Rear Camera
Remove the rear camera Required work steps: Required tools: ■ ■ Plastic tool Switch off the battery ■ Remove the lower assy ■ Remove the battery ■ Remove the M.2 module ■ Remove the LTE module ■ Remove the fan ■... -
Page 32: Remove The Lcd Assy
Remove the LCD assy Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Plastic tool ■ Remove the lower assy ■ Remove the battery ■ Remove the pen garage ► Remove the screws (1). ►... -
Page 33: Remove The Lcd Cover
Remove the LCD cover Required work steps: Required tools: ■ ■ Plastic tool Switch off the battery ■ Remove the lower assy ■ Remove the battery ■ Remove the LCD module ► Open the LCD module (1). ► Disconnect the covers in the direction of the arrow (2) ►... - Page 34 ► Slide the cable into the hinge cover (1) in the direction of the arrow. Before assembling, route the LCD cable into the hinge cover. Return to Table of Contents Page 34 of 41...
-
Page 35: Remove The Hinges
Remove the hinges Required work steps: Required tools: ■ ■ Screwdriver: Phillips PH00 Switch off the battery ■ Remove the lower assy ■ Remove the battery ■ Remove the LCD module ■ Remove the LCD front cover ► Remove the screws (1, 2). ►... - Page 36 The camera and camera cables are part of the LCD cover. Please note the microphone covers. Return to Table of Contents Page 36 of 41...
-
Page 37: Lifebook U5313X
LIFEBOOK U5313X Pos. Spare part Internal designation Mechanical parts: - Rubber foot 71/72 SIM slot cover/ dummy cover Depending on the device configuration Rubber corner Pen garage cover Pen holder Palm Vein bracket 82/81 SmartCard frame/dummy Hinges Touchpad, Touchpad buttons... -
Page 38: Additional Information Lifebook U5313X
5 years after end of product life Spare parts can be obtained from our approved and certified service partners: Spare parts - Fujitsu Technical Support pages from Fujitsu EMEA The exploded diagram is available at the following link: Exploded diagram - Fujitsu Technical Support pages from Fujitsu EMEA... -
Page 39: Disposal Information For Recycling Companies
Disposal information for recycling companies These instructions are for the complete dismantling of a Fujitsu product. All materials can thereby be disposed of according to their provision in the EC directive 2012/19/EC (Waste Electrical and Electronic Equipment (WEEE)). Product group:... - Page 40 Materials which must be disposed of in a special manner Designation Remarks Quantity Plastics which contain brominated flame This product may contain plastic parts with retardant Brominated flame retardants but to the best of our knowledge we provide this information to sort them out.
-
Page 41: Version History
Version history Version Date Name Change 02.05.2023 Creation complete Page 41 of 41...