Related Manuals for Philips NIN-733
Summary of Contents for Philips NIN-733
- Page 1 All manuals and user guides at all-guides.com FLEXIDOME HD VR NIN-733 / NIN-832 / NIN-932 Installation Manual...
- Page 2 All manuals and user guides at all-guides.com...
-
Page 3: Table Of Contents
All manuals and user guides at all-guides.com FLEXIDOME HD VR Table of Contents | en Table of Contents Safety Safety precautions Important safety instructions Connection in applications Type label FCC & ICES compliance MicroSD cards UL certification Bosch notices Copyrights Introduction Features System Information... - Page 4 All manuals and user guides at all-guides.com en | Table of Contents FLEXIDOME HD VR Installation Parts Mounting the unit 5.2.1 Surface mounting 5.2.2 Flush mount Connections 5.3.1 Make the connections Mount the camera Controls Camera positioning and field-of-view 5.6.1 5.6.2 Tilt 5.6.3...
- Page 5 All manuals and user guides at all-guides.com FLEXIDOME HD VR Table of Contents | en 10.1.1 Dimensions Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08...
-
Page 6: Safety
All manuals and user guides at all-guides.com en | Safety FLEXIDOME HD VR Safety Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. -
Page 7: Important Safety Instructions
All manuals and user guides at all-guides.com FLEXIDOME HD VR Safety | en Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions before operating the unit. Clean only with a dry cloth. -
Page 8: Connection In Applications
All manuals and user guides at all-guides.com en | Safety FLEXIDOME HD VR Connection in applications Grounding The yellow/green safety (power) ground wire from the camera must be connected to the system earth of the installation. U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding. -
Page 9: Fcc & Ices Compliance
All manuals and user guides at all-guides.com FLEXIDOME HD VR Safety | en FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 10: Microsd Cards
All manuals and user guides at all-guides.com en | Safety FLEXIDOME HD VR MicroSD cards Bosch Security systems recommends that local storage on microSD card should only be used for alarm recording and Automatic Network Replenishment (ANR) applications. To minimize the risk of loss of digital information, we recommend multiple, redundant recording systems, and a procedure to back up all digital information. -
Page 11: Bosch Notices
All manuals and user guides at all-guides.com FLEXIDOME HD VR Safety | en Bosch notices Video loss Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information. -
Page 12: Copyrights
All manuals and user guides at all-guides.com en | Safety FLEXIDOME HD VR Copyrights The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "Adobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following copyright: Copyright 1984-1989, 1994 Adobe Systems Incorporated. Copyright 1988, 1994 Digital Equipment Corporation. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright... -
Page 13: Introduction
All manuals and user guides at all-guides.com FLEXIDOME HD VR Introduction | en Introduction Features The FLEXIDOME HD Vandal-Resistant (VR) IP Day/Night camera is a high-performance, surveillance color camera. The analog video output of the camera can be used simultaneously with an IP stream to allow operation in hybrid mode. -
Page 14: System Information
All manuals and user guides at all-guides.com en | System Information FLEXIDOME HD VR System Information Network video server The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 encoding, it is ideally suited for IP communication and for remote access to digital video recorders and IP systems. -
Page 15: Audio
All manuals and user guides at all-guides.com FLEXIDOME HD VR System Information | en 3.1.5 Audio Two-way duplex audio is available in the unit for live voice communications or audio recording. 3.1.6 Alarm I/O The alarm input can be used to control the functionality of the unit. -
Page 16: Recording
All manuals and user guides at all-guides.com en | System Information FLEXIDOME HD VR 3.1.12 Recording The camera can be used with an iSCSI server connected via the network to store long-term recordings, and with a local microSD card for shorter storage times and temporary recordings. -
Page 17: Operation With External Systems
All manuals and user guides at all-guides.com FLEXIDOME HD VR System Information | en Operation with external systems The camera can be used with a variety of Bosch systems: – Bosch Video Management System – Bosch Video Client – Bosch Recording Station When connected to any of these systems, many of the camera configuration parameters are controlled by the system and not by the settings made via a web browser. -
Page 18: Planning
All manuals and user guides at all-guides.com en | Planning FLEXIDOME HD VR Planning Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – FLEXIDOME HD VR IP camera – Torx screwdriver bit – Camera mounting kit –... -
Page 19: Installation
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en Installation CAUTION! Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. Parts The camera/housing unit consists of the following parts: Surface Mount Box (some models only) Camera module and mounting base Inner liner... -
Page 20: Mounting The Unit
All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR Mounting the unit 5.2.1 Surface mounting 9.5 mm (0.375 in) PCD 123 mm (4.84 in) To mount the camera on the surface of a wall or ceiling: Use the surface mount box as a template to mark the holes indicated in the drawing. -
Page 21: Flush Mount
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en 5.2.2 Flush mount 105 (4.13) 57.6 57.6 (2.27) (2.27) PCD: 133 (5.25) To flush mount the camera in a wall or ceiling: Use the mounting template to mark out the recess and to mark the holes indicated in the drawing. -
Page 22: Connections
All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR Using one of the keyholes, hang the mounting base of the camera module on one screw temporarily; tilt the base slightly to gain access to the cable connections. Make the connections as outlined in section 5.3 below. - Page 23 All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en Cable tree Use the following table to identify the wires in the cable tree: Wire color Signal +12 VDC / 24 VAC Brown GND DC / 24 VAC Yellow / Green Earth Black / Orange...
- Page 24 All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR CAUTION! The RJ45 female-to-female network cable connector supplied is unshielded. To comply with the EMC Alarm immunity standard (EN 50130-4) or the EMC Railway immunity standard (EN 50121-4), a shielded twisted pair (STP) connection cable and a shielded RJ45 female-to-female network cable connector (not supplied) should be used.
-
Page 25: Mount The Camera
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en intercom system. The audio input signal is transmitted in sync. with the video signal. Refer to the cable tree table to identify the wire colors for connecting the audio input and output. Audio in: Line input level (not suitable for direct microphone signal). -
Page 26: Controls
All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR Controls 1. Reset button Restores the default IP address or restores a previous version of the firmware if uploading a new version fails. With the power on, use a small pointed object to press and hold the reset button for more than 10 seconds to restore the factory... -
Page 27: Camera Positioning And Field-Of-View
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en Camera positioning and field-of-view The camera module position can be adjusted along three axes and several zoom positions can be selected. To help position the camera and set the field-of-view: Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which provides a CVBS signal (for installation purposes only). -
Page 28: Pan
All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR 5.6.1 For horizontal adjustment (pan): Rotate the camera module (1) in the base. Do not rotate more than 180° in either direction. Tighten the locking screw (2) with the supplied screwdriver bit. -
Page 29: Twist
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en 5.6.3 Twist To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), twist the camera module to align the picture shown on the monitor. Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08... -
Page 30: Using The Install Wizard
All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR Using the install wizard The Menu button on the control panel is used to access the camera install wizard. When there is a choice in the wizard, the options are selected by either a short press (less than 2 s) or a long press (more than 2 s) of the button. -
Page 31: Closing The Unit
All manuals and user guides at all-guides.com FLEXIDOME HD VR Installation | en To rotate the image 180°, press and hold the Menu button until the image flips. Briefly press the Menu button to set the start position for the automatic motorized focus adjustment. –... - Page 32 All manuals and user guides at all-guides.com en | Installation FLEXIDOME HD VR Disconnect the service cable from the video jack. Place the inner liner in position aligning its fin with the bracket on the base. Using the supplied screwdriver bit, secure the dome bubble to the camera base by tightening the three screws.
-
Page 33: Camera Configuration
All manuals and user guides at all-guides.com FLEXIDOME HD VR Camera configuration | en Camera configuration The camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out via the network using a web browser. User modes The camera has six user modes. -
Page 34: Browser Connection
All manuals and user guides at all-guides.com en | Browser connection FLEXIDOME HD VR Browser connection A computer with Microsoft Internet Explorer can be used to receive live images from the camera, control the camera, and replay stored sequences. The camera is configured over the network using the browser. -
Page 35: Troubleshooting
All manuals and user guides at all-guides.com FLEXIDOME HD VR Troubleshooting | en Troubleshooting Function test The camera offers a variety of configuration options. Therefore, check that it works properly after installation and configuration. This is the only way to ensure that the camera will function as intended in the event of an alarm. -
Page 36: Resolving Problems
All manuals and user guides at all-guides.com en | Troubleshooting FLEXIDOME HD VR Resolving problems The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution No image Defective camera. Connect a local monitor transmission to to the camera and check... - Page 37 All manuals and user guides at all-guides.com FLEXIDOME HD VR Troubleshooting | en Malfunction Possible causes Solution No audio Hardware fault. Check that all connected transmission to audio units are operating remote station. correctly. Faulty cable connections. Check all cables, plugs, contacts and connections.
-
Page 38: Customer Service
All manuals and user guides at all-guides.com en | Troubleshooting FLEXIDOME HD VR Malfunction Possible causes Solution Placeholder with a JVM not installed on your Install JVM on your red cross instead of computer or not computer. the ActiveX activated. components. -
Page 39: Maintenance
All manuals and user guides at all-guides.com FLEXIDOME HD VR Maintenance | en Maintenance Testing the network connection The ping command can be used to check the connection between two IP addresses. This allows testing whether a device is active in the network. Open the DOS command prompt. -
Page 40: Repairs
All manuals and user guides at all-guides.com en | Maintenance FLEXIDOME HD VR Repairs CAUTION! Never open the casing of the unit. The unit does not contain any user serviceable parts. Ensure that all maintenance or repair work is performed only by qualified personnel (electrical engineering or network technology specialists). -
Page 41: Technical Data
All manuals and user guides at all-guides.com FLEXIDOME HD VR Technical Data | en Technical Data 10.1 Specifications NIN-932 Imager 1/3-inch CMOS HD sensor Image resolution 1920 × 1080 pixels Rated supply voltage 24 VAC 50/60 Hz 12 VDC Power-over-Ethernet 48 VDC nominal Current consumption 600 mA (12 VDC) 500 mA (24 VAC) 175 mA (PoE 48 VDC) - Page 42 All manuals and user guides at all-guides.com en | Technical Data FLEXIDOME HD VR Lens type 3 to 9 mm or 10 to 23 mm varifocal SR (Super Resolution) Auto Varifocal (AVF) adjustment Automatic iris control Controls Via web browser or Configuration Manager User modes 6 pre-defined customizable user modes LAN interface...
- Page 43 All manuals and user guides at all-guides.com FLEXIDOME HD VR Technical Data | en Memory card slot Supports SDHC and SDXC microSD cards Weight 0.84 kg (1.85 lb) Environment IP 66, NEMA Type 4X Impact protection IK10 Operating -30 °C to +50 °C (-22 °F to +122 °F) temperature NIN-832 Imager...
- Page 44 All manuals and user guides at all-guides.com en | Technical Data FLEXIDOME HD VR Privacy Masking Four independent areas, fully programmable Video Analysis Motion+, IVA versions Lens type 3 to 9 mm or 10 to 23 mm varifocal SR (Super Resolution) Auto Varifocal (AVF) adjustment Automatic iris control...
- Page 45 Environment IP 66, NEMA Type 4X Impact protection IK10 Operating -30 °C to +50 °C (-22 °F to +122 °F) temperature NIN-733 Imager 1/3-inch CMOS HD sensor Image resolution 1280 × 720 pixels Rated supply voltage 24 VAC 50/60 Hz...
- Page 46 All manuals and user guides at all-guides.com en | Technical Data FLEXIDOME HD VR Sharpness Sharpness enhancement level selectable Privacy Masking Four independent areas, fully programmable Video Analysis Motion+, IVA versions Lens type 3 to 9 mm or 10 to 23 mm varifocal SR (Super Resolution) Auto Varifocal (AVF) adjustment Automatic iris control...
- Page 47 All manuals and user guides at all-guides.com FLEXIDOME HD VR Technical Data | en Audio standards G.711, 8kHz sampling rate L16, 16kHz sampling rate Audio signal-to-noise > 50 dB ratio Memory card slot Supports SDHC and SDXC microSD cards Weight 0.84 kg (1.85 lb) Environment IP 66, NEMA Type 4X...
- Page 48 All manuals and user guides at all-guides.com en | Technical Data FLEXIDOME HD VR AM18-Q0637 | v1.1 | 2013.08 Installation Manual Bosch Security Systems...
- Page 49 All manuals and user guides at all-guides.com...
- Page 50 All manuals and user guides at all-guides.com Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013...