D-Link Gama DGS-3000 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DGS-3000 series
  6. Hardware installation manual

D-Link Gama DGS-3000 Series Hardware Installation Manual

Hide thumbs Also See for Gama DGS-3000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Características
Solución completa de seguridad
Soporte para listas de control de acceso (ACL),
métodos de autenticación de varios usuarios
y vinculación IP-MAC-puerto que garantiza un
entorno de red seguro
Fiabilidad superior
La protección 6 kV contra sobretensión por puerto,
y el soporte de ERPS y de fuentes de alimentación
redundante (RPS) maximizan la disponibilidad
del servicio.
Características para el proveedor de servicios
Las funciones de multidifusión de capa 2 (Multicast
VLAN) permiten que las transmisiones de IPTV se
distribuyan de forma eficiente y las funciones de
seguridad evitan el abuso de la red
Gama DGS-3000
Switches Gigabit L2 gestionables Enterprise
Características
Características fiables de hardware y software
• Protección contra sobretensión de 6 kV para los
puertos Ethernet
• Reloj de tiempo real (RTC)
• Dying Gasp
• Compatibilidad con fuente de alimentación
redundante (RPS)
Características avanzadas de conmutación
• VLAN trunking
• VLAN mirroring
• ISM VLAN
• RSPAN
Características completas de seguridad
• Listas de control de acceso (ACL)
• Motor de seguridad D-Link
• Protección contra ataques BPDU
• Prevención de ataques DoS
• Control de acceso basado en IEEE 802.1X
• Control de acceso basado en MAC
• Guest VLAN
Administración del sistema
• 802.1ag CFM
• 802.3ah enlace Ethernet OAM
• SNMP v1/v2c/v3
• RMON v1/v2
• LLDP/LLDP-MED
Garantía ilimitada de por vida
Los conmutadores gestionables Gigabit L2 de la serie DGS-3000 forman parte de la familia
de productos de Switches gestionables de D-Link que proporciona velocidades de Gigabit y
10 Gigabit por cobre o fibra para todo tipo de entornos Enterprise Ofrecen una gran variedad
de puertos, incluidos RJ-45 de 10/100/1000BASE-T, SFP de 1G y SFP+ de 10 GbE para un mayor
ancho de banda de red. La protección contra sobretensiones, las funciones avanzadas de nivel
2 y un conjunto de herramientas de seguridad y administración hacen que los conmutadores
gestionables Gigabit L2 de la serie DGS-3000 sean ideales para todo tipo de entornos
Empresariales, así como aplicaciones Metro Ethernet y campus.
Rendimiento multi-gigabit
Los conmutadores gestionables Gigabit L2 de la serie DGS-3000 disponen de una variedad
de tipos de puertos, incluidos RJ-45 de 1 G, SFP de 1 G y SFP+ 10 G. Todos los modelos
ofrecen un mínimo de al menos 2 puertos SFP de 1 G. DGS-3000-28X y DGS-3000-52X ofrecen
4 puertos de 10 G SFP+ para mejorar el ancho de banda y la tolerancia a los fallos. Los switches
DGS-3000-28LP y DGS-3000-28XMP cuentan con alimentación por Ethernet (PoE), lo que
permite la instalación de dispositivos compatibles en ubicaciones remotas sin acceso inmediato
a tomas de corriente.
Redes eficientes y seguras
La serie DGS-3000 soporta sobretensiones de hasta 6 kV gracias a que todos los puertos Ethernet
protegen al switch de sobretensiones debidas a rayos o cableado eléctrico defectuoso. La gama
DGS-3000 es compatible con (ERPS) ITU-T G.8032, que agrega 50 milisegundos en caso de fallo
de uno de los anillos, minimizando la interrupción del servicio. Los switches también admiten
la agregación de enlaces IEEE 802.1AX y 802.3ad, lo que permite agrupar varios puertos para
proporcionar redundancia y equilibrar la carga..

Advertisement

Table of Contents
loading

Related Manuals for D-Link Gama DGS-3000 Series

Summary of Contents for D-Link Gama DGS-3000 Series

  • Page 1 Características Los conmutadores gestionables Gigabit L2 de la serie DGS-3000 forman parte de la familia de productos de Switches gestionables de D-Link que proporciona velocidades de Gigabit y Características fiables de hardware y software 10 Gigabit por cobre o fibra para todo tipo de entornos Enterprise Ofrecen una gran variedad •...
  • Page 2 D-Link Assist Silver - asistencia en el mismo día D-Link Assist Silver está diseñado para empresas de (SIM) de D-Link simplifica y acelera las tareas de administración, permitiendo "alta disponibilidad" que requieren respuesta rápida en horario de que se configuren, supervisen y mantengan múltiples switches desde cualquier oficina.
  • Page 3 Gama DGS-3000 Switches Gigabit L2 gestionables Especificaciones técnicas Interfaz DGS-3000-28X DGS-3000-52X Tamaño • Ancho estándar de montaje en rack de 19 pulgadas • 1U de altura Interfaz • 24 x 10/100/1000 Mbps + 4 10G SFP+ • 48 x 10/100/1000 Mbps + 4 10G SFP+ Puerto de consola •...
  • Page 4 Gama DGS-3000 Switches Gigabit L2 gestionables Especificaciones técnicas Interfaz DGS-3000-28LP DGS-3000-28XMP Tamaño • Ancho estándar de montaje en rack de 19 pulgadas • 1U de altura Interfaz • 24 x 10/100/1000 Mbps PoE + 4 SFP • 24 x 10/100/1000 Mbps PoE + 4 SFP+ Puertos y funciones estándar •...
  • Page 5 Gama DGS-3000 Switches Gigabit L2 gestionables Especificaciones de software Apilado (stacking) virtual • (SIM) - Hasta 32 enlaces por pila virtual Características L2 • Tabla de direcciones MAC: Hasta 16K • Restricción de raíz • Control del flujo • Detección de loopback - Control 802.3x del flujo •...
  • Page 6 • Compatibilidad con Microsoft® NLB (Network Load Balancing) • 802.1AB LLDP (compatible con IPv4) - LLDP-MED • Zero Touch Provisioning (ZTP) • Cliente BootP/DHCP (compatible con IPv4) • sFlow • Cliente DNS • Asistente de red D-Link (DNA) • Configuración automática DHCP...
  • Page 7 Las especificaciones pueden modificarse sin previo aviso. D-Link es una marca registrada de D-Link Corporation y sus filiales extranjeras. Todas las demás marcas registradas pertenecen a sus respectivos propietarios. ©2017 D-Link Corporation. Todos los derechos reservados. Salvo error u omisión.
  • Page 9 Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.

  • Page 10: Table Of Contents

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Table of Contents Intended Readers ................................ 1 Typographical Conventions ............................1 Notes and Cautions ..............................1 Safety Instructions ............................... 1 Safety Precautions ..............................1 General Precautions for Rack-Mountable Products ....................3 Protecting Against Electrostatic Discharge ........................4 Chapter 1 Introduction ..............................
  • Page 11 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Physical and Environmental ............................37 Performance................................39 LED Indicators ................................40 Port Functions ................................41 Appendix B – Cables and Connectors ........................44 Ethernet Cable ................................44 Console Cable ................................45 Redundant Power Supply (RPS) Cable ........................45 Warranties &...

  • Page 12: Intended Readers

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Intended Readers Intended Readers Typographical Conventions Notes and Cautions Safety Instructions General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge The DGS-3000 Series Hardware Installation Guide contains information about the installation, maintenance and technical information of switches in this series.
  • Page 13 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Observe and follow service markings. Do not service any product except as explained in the system documentation. Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose the user to electrical shock.

  • Page 14: General Precautions For Rack-Mountable Products

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops and uneven surfaces. CAUTION: Risk of explosion if the battery is replaced by an incorrect battery type. Dispose of used batteries according to the instructions.

  • Page 15: Protecting Against Electrostatic Discharge

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside the system. To prevent static damage, discharge static electricity from your body before touching any of the electronic components, such as the microprocessor. This can be done by periodically touching an unpainted metal surface on the chassis.

  • Page 16: Chapter 1 Introduction

    D-Link Ethernet switch. Switch Description The DGS-3000 Series is D-Link’s latest generation of Gigabit Ethernet switches with 1Gbps SFP port connectivity and 10Gbps SFP+ port connectivity. The DGS-3000 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility.

  • Page 17: Features

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Web UI Reference Guide. NOTE: If any item is missing or damaged, please contact your local D-Link reseller for replacement. Features The list of features below highlights the significant features of the Switch.
  • Page 18 Supports PPPoE Circuit Insertion Supports IEEE 802.3az compliance Supports Standard MIBs like MIBII, Bridge MIB, SNMPv2 MIB, RMON MIB, RMONv2 MIB, Ether-like MIB, 802.3 MAU MIB, 802.1p MIB, RADIUS Authentication Client MIB, Ping & Traceroute MIB, and D-Link Private MIBs...

  • Page 19: Front Panel Components

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Front Panel Components The front panel of the Switch features a variety of ports and LED indicators that will be discussed in detail in this section. Also located on the front panel of the Switch is a pinhole that can be pressed and held for 5 seconds to perform a hardware factory reset on the Switch after which the Switch will reboot.

  • Page 20: Ports

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 1-8 Front panel view of a DGS-3000-52L Switch Figure 1-9 Front panel view of a DGS-3000-52X Switch Ports The following ports are available on the front panel of switches in this series: DGS-3000-10L: Eight Copper RJ45 Ports (10/100/1000Mbps) Two SFP Ports (1000Mbps)

  • Page 21: Led Indicators

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Forty-eight Copper RJ45 Ports (10/100/1000Mbps) Four SFP/SFP+ Ports (1/10Gbps) One RJ45 Console Port LED Indicators The front panel of switches in this series features LED indicators for Power, Console, Link/Act, RPS, and Fan indicators for all the ports.
  • Page 22 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 1-16 LED indicators for a DGS-3000-28XS Switch Figure 1-17 LED indicators for a DGS-3000-52L Switch Figure 1-18 LED indicators for a DGS-3000-52X Switch The following table describes the LED indicators in more detail. Description This LED will light green after powering the Switch on to indicate the ready state of Power...

  • Page 23: Rear Panel Components

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Rear Panel Components The rear panel of switches in this series features an AC power socket, power cord clip hole, a DC power RPS port with an ON/OFF toggle switch, a security lock, and an electrical grounding point. The DC power RPS port can be used to either supply power to the Switch from a DC power supply or from an RPS.

  • Page 24: Side Panel Components

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 1-26 Rear panel view of a DGS-3000-52L Switch Figure 1-27 Rear panel view of a DGS-3000-52X Switch The AC power socket is a standard three-pronged connector that supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord into a power outlet.
  • Page 25 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 1-29 Side panels view of a DGS-3000-20L Switch Figure 1-30 Side panels view of a DGS-3000-28L Switch Figure 1-31 Side panels view of a DGS-3000-28LP Switch Figure 1-32 Side panels view of a DGS-3000-28X Switch...
  • Page 26 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 1-33 Side panels view of a DGS-3000-28XMP Switch Figure 1-34 Side panels view of a DGS-3000-28XS Switch Figure 1-35 Side panels view of a DGS-3000-52L Switch Figure 1-36 Side panels view of a DGS-3000-52X Switch...

  • Page 27: Smart Fans

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Smart Fans Switches in this series include smart fans that will automatically change their speed depending on the internal temperature detected by the sensors built-in the Switch’s hardware. These smart fans support three states. They can either be off, running at a low speed, or running at a high speed.

  • Page 28: Chapter 2 Installation

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Chapter 2 Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch in a Standard 19" Rack Installing Transceivers into the Transceiver Ports Power On (AC Power) Power On (DC Power) Installing the Redundant Power Supply (RPS) Installing the RPS into a Rack-mount Chassis Installation Guidelines...

  • Page 29: Installing The Switch In A Standard 19" Rack

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2–1 Attaching rubber feet to the Switch Install the Switch on a sturdy, level surface that can support at least 3kg (6.6lb). Do not place heavy objects on the Switch. Installing the Switch in a Standard 19" Rack The Switch can be mounted in a standard 19"...

  • Page 30: Installing Transceivers Into The Transceiver Ports

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2–3 Installing the Switch in a Rack CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizers before installing components in the rack.

  • Page 31: Power On (Ac Power)

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2–4 Inserting an SFP+ transceiver into an SFP+ transceiver port For a full list of supported transceivers, compatible with switches in this series, refer to Port Functions on page 41. Power On (AC Power) Plug one end of the AC power cord into the AC power port of the Switch and the other end into the local power source outlet.
  • Page 32 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2-5 Inserting the tie wrap 2. Plug the AC power cord into the power socket of the Switch. Figure 2-6 Inserting the power cord 3. Slide the Retainer through the Tie Wrap until the end of the cord.
  • Page 33 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2-7 Sliding the retainer through the tie wrap 4. Circle the tie of the Retainer around the power cord and into the locker of the Retainer.

  • Page 34: Power On (Dc Power)

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure 2-8 Circling around the power cord 5. Fasten the tie of the Retainer until the power cord is secured. Figure 2-9 Securing the power cord Power On (DC Power) The Switch provides a DC power port to connect to any DC power source. The DC power source must meet the following requirements: The DC power source's output voltage must be between 11.4V and 12.6V.

  • Page 35: Installing The Redundant Power Supply (Rps)

    Installing the Redundant Power Supply (RPS) The RPS is designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. It is an external RPS unit enclosed in solid metal case with sockets to AC or DC power sources on one end, and connect to a...

  • Page 36: Connecting The Rps To The Rps Port

    Connecting the RPS to the RPS Port The D-Link RPS can be connected to the RPS port of the Switch using the DC power supply cord, called the DPS- CB150-2PS (HW: B1). It is important to notice that the RPS can supply power to one or two DGS-3000 Switches at the same time.

  • Page 37: Chapter 3 Connecting The Switch

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Chapter 3 Connecting the Switch Switch to End Node Switch to another Switch Connecting to a Network Backbone or Server Switch to End Node An end node can be any networking device, plugged into any of the networking ports of the Switch, where data transmission ends.

  • Page 38: Connecting To A Network Backbone Or Server

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Connecting to a Network Backbone or Server The SFP/SFP+ ports are ideal for connecting a network backbone, server or server farm to the Switch. The SFP/SFP+ ports can operate at speeds of 1/10 Gbps respectively. Figure 3–3 Server to Switch Connection...

  • Page 39: Introduction To Switch Management

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Chapter 4 Introduction to Switch Management Management Options Connecting to the Console Port SNMP Settings Management Options This Switch can be managed Out-Of-Band (OOB) through the console port on the front panel of the Switch or in-band using any of the Copper RJ45 or SFP/SFP+ ports on the front panel.

  • Page 40: Connecting To The Switch For The First Time

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Configure the terminal emulation software to use the following settings: Select the appropriate serial port (For example, COM 1). Set the Bits per second (data rate) to 115200 baud. Set the data format to 8 data bits, 1 stop bit, and no parity.

  • Page 41: Creating A User Account

    DGS-3000-28XMP Gigabit Ethernet Switch Command Line Interface Firmware: Build 3.00.002 Copyright(C) 2016 D-Link Corporation. All rights reserved. UserName: By default, there is no login user account configured on this Switch. Simply press the Enter key twice and the CLI input cursor (DGS-3000-28XMP:admin# ) will be available, as shown below.

  • Page 42: Configuring The Ip Address

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Configuring the IP Address Each networking node, within a network, must use a unique IP address. This IP address is used to communicate with other networking devices in the network. The IP address of the Switch is also important to be able to access the Web UI of this Switch.

  • Page 43: Snmp Settings

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide For more information about IP address configuration and management, refer to the DGS-3000 Series CLI Reference Guide and the DGS-3000 Series Web UI Reference Guide. SNMP Settings The Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed specifically for managing and monitoring network devices.
  • Page 44 Management Information Base. The proprietary MIB may also be retrieved by specifying the MIB’s Object Identifier. MIB values can be either read-only or read-write. NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management software, go to http://dview.dlink.com.tw/...

  • Page 45: Chapter 5 Web-Based Switch Configuration

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Chapter 5 Web-based Switch Configuration Introduction Logging into the Web UI Web-based User Interface (Web UI) Introduction Most software functions of the Switch can be managed, configured, and monitored via the embedded HTML Web- based User Interface (Web UI).

  • Page 46: Web-Based User Interface (Web Ui)

    This area displays the Switch's ports and expansion modules and shows port activity, depending on the specified mode. Some management functions, including port monitoring are accessible here. Click the D-Link logo to go to the D- Link Website. In this area, folders and window links are available for selection. Software features,...

  • Page 47: Web Pages

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Web Pages In area 2, mentioned above, the following main folders will be available for selecting. Folder Name Description In this folder features regarding the Switch’s configuration can be viewed and System Configuration configured.

  • Page 48: Appendix A - Technical Specifications

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Appendix A – Technical Specifications General Feature Description IEEE 802.1AB Link Layer Discovery Protocol Standards IEEE 802.1D-2004 Spanning Tree Protocol IEEE 802.1p Priority Queues IEEE 802.1Q-2005 Virtual LAN IEEE 802.1S Multiple Spanning Tree Protocol IEEE 802.1W Rapid Spanning Tree Protocol IEEE 802.1X Port-based Authentication IEEE 802.3i 10BASE-T Ethernet...
  • Page 49 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Feature Description listed below: DGS-3000-10L: Fanless DGS-3000-20L: Fanless DGS-3000-28L: Fanless DGS-3000-28LP: 2 Fans DGS-3000-28X: 1 Fan DGS-3000-28XMP: 2 Fans DGS-3000-28XS: 2 Fans DGS-3000-52L: 2 Fans DGS-3000-52X: 2 Fans DGS-3000-10L: 13.0 Watts (100 V), 13.6 Watts (240 V) Maximum Power Consumption DGS-3000-20L: 15.3 Watts (100 V), 15.6 Watts (240 V) DGS-3000-28L: 17.5 Watts (100 V), 17.6 Watts (240 V)

  • Page 50: Performance

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Feature Description DGS-3000-28X: 440 mm (W) 210 mm (D) 44 mm (H) DGS-3000-28XMP: 440 mm (W) 308 mm (D) 44 mm (H) DGS-3000-28XS: 440 mm (W) 210 mm (D) 44 mm (H) DGS-3000-52L: 440 mm (W) 210 mm (D) 44 mm (H) DGS-3000-52X: 440 mm (W) 210 mm (D) 44 mm (H) DGS-3000-10L: 1.242 kg...

  • Page 51: Led Indicators

    Priority Queues Supports 8K MAC addresses. MAC Address Table Supports 512 Static MAC addresses. Supports D-Link Single IP Management version 1.6. Virtual Stacking / Clustering Manage up to 32 devices in a virtual stack with a single IP address. LED Indicators...

  • Page 52: Port Functions

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Location LED Indicative Color Status Description 10/100Mbps. Light off No link Solid Light Power feeding PoE Mode Green (DGS-3000-28LP Solid Light Error Condition Amber and DGS-3000- Light Off No Power feeding 28XMP only) Solid Light When there is a secure connection (or LED per SFP Port...
  • Page 53 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Feature Description Support Auto-negotiation for full-duplex and flow control operations SFP Transceivers Supported: DEM-302S-LX (1000BASE-LX, Single-mode, 2km) DEM-310GT (1000BASE-LX, Single-mode, 10km) DEM-311GT (1000BASE-SX, Mutli-mode, 550m) DEM-312GT2 (1000BASE-SX, Multi-mode, 2km) DEM-314GT (1000BASE-LHX, Single-mode, 50km) DEM-315GT (1000BASE-ZX, Single-mode, 80km) DGS-712 (1000BASE-T Copper SFP, 100m) WDM Transceivers Supported:...
  • Page 54 For IEEE 802.3at, use category 5e or higher UTP/STP cables Both DGS-3000-28LP and DGS-3000-28XMP work with all D- Link 802.3af and 802.3at capable devices and with all non- 802.3af and non-802.3at capable D-Link Access Points, IP Cameras and IP Phones. The total power budget is 193 Watts for DGS-3000-28LP.

  • Page 55: Appendix B - Cables And Connectors

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Appendix B – Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ45 connector and their pin assignments.

  • Page 56: Console Cable

    DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Console Cable When connecting the Switch to a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-RJ45 receptacle/connector and their pin assignments. Figure B–2 Console-to-RJ45 Cable Console-to-RJ45 PIN Assignments: Console (DB-9/RS-232) RJ45...
  • Page 57 DGS-3000 Series Gigabit Ethernet Switch Hardware Installation Guide Figure B–3 DPS-CB150-2PS Cable RPS Cable PIN Assignments: RPS 14-pin to two 2-pin DC Power Cable Pin Assignments 2-pin 14-pin +12V +12V +12V +12V +12V Power Good Power Present...

  • Page 58: Warranties & Technical Support

    The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
  • Page 59 D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
  • Page 60 Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
  • Page 61 This guide is only for initial configuration. Please refer to the user manual to learn more or visit http://www.mydlink.com for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website. http://support.dlink.com Canada...
  • Page 62 Europe customers TECHNICAL SUPPORT TECHNISCHE UNTERSTÜTZUNG ASSISTANCE TECHNIQUE ASISTENCIA TÉCNICA SUPPORTO TECNICO TECHNISCHE ONDERSTEUNING POMOC TECHNICZNA TECHNICKÁ PODPORA TECHNICKÁ PODPORA dlink.com/support TECHNIKAI TÁMOGATÁS TEKNISK SUPPORT TEKNISK SUPPORT TEKNISK STØTTE TEKNINEN TUKI ASSISTÊNCIA TÉCNICA ΤΕΧΝΙΚΉ ΥΠΟΣΤΉΡΙΞΗ TEHNIČKA PODRŠKA TEHNIČNA PODPORA SUPORT TEHNIC ТЕХНИЧЕСКА...
  • Page 63 Indonesia - www.dlink.co.id Malaysia - www.dlink.com.my Philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea customers Tel : +82-2-2028-1810 Monday to Friday 9:00am to 6:00pm Web : http://d-link.co.kr E-mail : g2b@d-link.co.kr New Zealand customers Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail: support@dlink.co.nz...
  • Page 64 08600 DLINK (for South Africa only) Monday to Friday 8:30am to 9:00pm South Africa Time Web: http://www.d-link.co.za E-mail: support@d-link.co.za D-Link Middle East - Dubai, U.A.E. customers Plot No. S31102, Jebel Ali Free Zone South, P.O.Box 18224, Dubai, U.A.E. Tel: +971-4-8809022...
  • Page 65 Pakistan customers Islamabad Office: 61-A, Jinnah Avenue, Blue Area, Suite # 11, EBC, Saudi Pak Tower, Islamabad - Pakistan Tel.: +92-51-2800397, 2800398 Fax: +92-51-2800399 Karachi Office: D-147/1, KDA Scheme # 1, Opposite Mudassir Park, Karsaz Road, Karachi – Pakistan Phone: +92-21-34548158, 34326649 Fax: +92-21-4375727 Technical Support: +92-21-34548310, 34305069 General Inquiries: info.pk@dlinkmea.com...
  • Page 66 Lebanon RMA center customers Dbayeh/Lebanon PO Box:901589 Tel: +961 4 54 49 71 Ext:14 Fax: +961 4 54 49 71 Ext:12 Email: taoun@dlinkmea.com Bahrain customers Technical Support: +973 1 3332904 Kuwait customers Technical Support: + 965 22453939 / +965 22453949...
  • Page 67 Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка компании D-Link работает в круглосуточном режиме ежедневно, кроме официальных праздничных дней. Звонок...
  • Page 68 Tel: +373 (22) 80-81-07 E-mail:info@dlink.md Беларусь Мінск, пр-т Незалежнасці, 169 Тэл.: +375 (17) 218-13-65 E-mail: support@dlink.by Қазақстан Алматы, Құрманғазы к-cі,143 үй Тел.: +7 (727) 378-55-90 E-mail: almaty@dlink.ru Հայաստան Երևան, Դավթաշեն 3-րդ թաղամաս, 23/5 Հեռ.՝ +374 (10) 39-86-67 Էլ. փոստ՝ info@dlink.am Latvija Rīga, Lielirbes iela 27 Tel.: +371 (6) 761-87-03...
  • Page 69 Soporte Técnico Para Usuarios En Latino America Por favor revise el número telefónico del Call Center de su país en http://www.dlinkla.com/soporte/call-center Soporte Técnico de D-Link a través de Internet Horario de atención Soporte Técnico en www.dlinkla.com e-mail: soporte@dlinkla.com & consultas@dlinkla.com...
  • Page 70 Clientes de Brasil Caso tenha dúvidas na instalação do produto, entre em contato com o Suporte Técnico D-Link. Acesse o site: www.dlink.com.br/suporte...
  • Page 71 香港技術諮詢服務專線 (852) 8100 8892 香港服務時間： 週一至週五： 10:00 ~ 19:00 週六： 09:00~13:00 / 週日及公眾假期休息 http://www.dlink.com.hk 香港網站： 香港電子郵件： service@cn.synnex-grp.com 香港地區維修據點如下： 維修據點： 葵芳服務中心地址：新界葵涌大連排道 202-210 號偉倫中心一期 1 樓 A 室 灣仔服務中心地址：香港灣仔莊士敦道 178 號 -188 號華懋莊士敦廣場 16 樓 02 室 如果您是其他地區的用戶，請參考 D-Link 網站 www.dlink.com 查詢全球各地分 公司的聯絡資訊以取得相關支援服務。...
  • Page 72 Pelanggan Indonesia Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Tel: 0800-14014-97 (TOLL FREE) Dukungan Teknis D-Link melalui Internet: General Inquiries: sales@id.dlink.com Tech Support: support@id.dlink.com Website : http://www.dlink.co.id 日本のお客様 この度は弊社製品をお買い上げいただき、誠にありがとうございます。 製品に同梱されている保証書の購入元にお問い合わせください。 中國客戶...
  • Page 73 8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...

This manual is also suitable for:

Dgs-3000-10lDgs-3000-20lDgs-3000-28lDgs-3000-28lpDgs-3000-28xDgs-3000-28xmp ... Show all

Table of Contents