Advertisement
4. BATTERY REPLACEMENT
Battery removal see fig.1.
NOTE: The direction of how the batteries are to be installed is embossed on the side of the voltage detector.
5. OPERATION
5.1.
With the batteries installed (see section 4), turn the unit on by rotating the switch to choose high or low voltage sensitivity.
The green LED will flash once and the audible output will beep once when "High V" or "Low V" is selected. This indicates the batteries are
functioning correctly.
5.2.
Bring the probe (fig.2) in close proximity to the conductor, the red LED and audio output will indicate the presence of an AC supply voltage
within the range stated in the specifications. To determine magnitude and or frequency an appropriate metering device is required.
fig.2
5.3.
Insulated cores may be checked for continuity breaks (fig.3).
NOTE: Each core must be individually connected to a detectable voltage.
5.4.
Electrical sockets (80V - 220V) can be checked by placing the probe tip into socket terminal aperture.
5.5.
NOTE: Wait until the LED and the audible output finishes before proceeding with the next operation. Using this device near equipment
that generates electromagnetic interference may result in inaccurate indications.
6. MAINTENANCE
6.1.
Periodically wipe the casing with a damp cloth DO NOT use abrasives or solvents.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
fig.1
fig.3
www.sealey.co.uk
AK1998.V3 Issue:5
REGISTER YOUR
PURCHASE HERE
24/05/23
Advertisement
